MPlayer出现新问题

blackfy

我已经看过精华贴子,也搜索过,似乎都没有出现过我这个问题

我装的是rc5的版本,是按照论坛的 贴子一步步装的 ,用mplayer播放正常
但用gmpaler是,到了这步就停下来了


Reading config file /usr/local/etc/mplayer/mplayer.conf
Reading config file /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: 没有那个文件或目录
Reading config file /root/.mplayer/config
Reading config file /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: 没有那个文件或目录
Reading config file /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: 没有那个文件或目录
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf: No such file or directory
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: 50 audio & 136 video codecs
Font /root/.mplayer/font/font.desc loaded successfully! (206 chars)
使用Linux的硬件RTC计时(1024Hz)
Input config file /root/.mplayer/input.conf parsed : 52 binds
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'


我的 SKIN设置是正确的 ,否则会提示错误,但我的还是什么都没有,着到SKIN后就停下来了,连闪都不闪下,请问这该怎么解决,我急啊!谢谢了!!

blackfy

我自己顶下 ,需要帮忙 :-(

athlonxhy

你编译的时候是否加了这样的参数：－－enable－gui

baryon

我安装mplayer-1.0pre3的过程很顺利,可就是最后运行GMPLAER时产生以下错误信息:
Reading config file /usr/local/etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
Reading config file /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: 没有那个文件或目录
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf: No such file or directory
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: 61 audio & 169 video codecs
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using Linux hardware RTC timing (1024Hz).
Can't open input config file /root/.mplayer/input.conf: 没有那个文件或目录
Can't open input config file /usr/local/etc/mplayer/input.conf: 没有那个文件或目录
Falling back on default (hardcoded) input config
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'
[skin] file ( /usr/local/share/mplayer/Skin/default/skin ) not found.
Skin not found (default).


我是按./configure --enable-gui编译的.

pinkme005

要这样的,编辑.mplayer或.gmplayer中的config,加入skin=skin1,当然,你要保证在~/.mplayer/SKIN中有skin1这个皮肤,

这就是我的config中的内容
#Write your default config options here!
skin=dvdplayer

xukai

在网上找些skin拷到相应目录下看看
我的也是这个问题，但拷了些skin和font后就没事了

emlxm

借地方一用谢谢：

我自己编译的1.03的，我想播放网上的流媒体，在输入地址（比如rtsp：//......）后，然后他会自动的在前面加一个http:// 请问有办法可以解决嘛？？
或者是重新编译需要注意的参数问题？？
谢谢！

baryon

经过努力,我用mplayer放rm时出来图像和伴音,可几秒钟后就跳出了,显示以下信息:
Using GNU internationalization
Original domain: messages
Original dirname: /usr/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale

MPlayer 1.0pre3-3.2.2 (C) 2000-2003 MPlayer Team

CPU: Intel Pentium M Banias 1677 MHz (Family: 6, Stepping: 5)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2

Reading config file /usr/local/etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
Reading config file /home/gabucino/.mplayer/i_did_not_RTFM_carefully_enough...: 没有那个文件或目录
Reading /root/.mplayer/codecs.conf: 61 audio & 169 video codecs
Font /root/.mplayer/font/font.desc loaded successfully! (206 chars)
Using Linux hardware RTC timing (1024Hz).
Input config file /root/.mplayer/input.conf parsed: 53 binds

Playing 01aa.rm.
Cache fill:  0.00% (0 bytes)    REAL file format detected.
skip_str: 12 bytes skipped
skip_str: 20 bytes skipped
skip_str: 12 bytes skipped
skip_str: 20 bytes skipped
======= WAVE Format =======
Format Tag: 28515 (0x6F63)
Channels: 2
Samplerate: 22050
avg byte/sec: 32385
Block align: 564
bits/sample: 16
cbSize: 18
Unknown extra header dump: [5e] [0] [e] [0] [a] [0] [34] [2] [8] [0] [1] [0] [0] [2] [4] [0] [0] [12]
===========================
skip_str: 0 bytes skipped
skip_str: 16 bytes skipped
Not audio/video stream or unsupported!
VIDEO:  RV40 [40002000,01081020]  640x352  (aspect 0.00)  23.00 fps
Clip info:
comment:
==========================================================================
Opening audio decoder: [realaud] RealAudio decoder
opening shared obj '/usr/local/lib/codecs/rp9codecs/cook.so.6.0'
Audio codec: [10] 32 Kbps Stereo Music
Audio bitrate: 32.386 kbit/s (4048 bps)
AUDIO: 22050 Hz, 2 ch, 16 bit (0x10), ratio: 4048->88200 (32.4 kbit)
Selected audio codec: [racook] afm:realaud (RealAudio COOK)
==========================================================================
vo: X11 running at 1024x768 with depth 24 and 32 bpp (":0.0" => local display)
==========================================================================
Opening video decoder: [realvid] RealVideo decoder
opening shared obj '/usr/local/lib/codecs/rp9codecs/drv4.so.6.0'
Selected video codec: [rv40] vfm:realvid (Linux RealPlayer 9 RV40 decoder)
==========================================================================
Checking audio filter chain for 22050Hz/2ch/16bit -> 22050Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 22050 hz, little endian signed int
AF_pre: 22050Hz 2ch Signed 16-bit (Little-Endian)
audio_setup: Can't open audio device /dev/dsp: 设备或资源忙
AO: [arts] Connected to sound server
AO: [arts] Stream opened
AO: [arts] buffer size: 20480
AO: [arts] packet size: 2048
AO: [arts] 22050Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 22050Hz/2ch/16bit -> 22050Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 640 x 352 (preferred csp: Planar I420)
VDec: using Planar I420 as output csp (no 0)
Movie-Aspect is 1.82:1 - prescaling to correct movie aspect.
VO: [xv] 640x352 => 640x352 Planar I420  [fs]
A:   4.2 V:   4.1 A-V:  0.010 ct:  0.105  101/101  10%  6%  1.7% 1 0 94%

MPlayer interrupted by signal 11 in module: decode_video
- MPlayer crashed by bad usage of CPU/FPU/RAM.
  Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
  disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
  gcc version. If you think it's MPlayer's fault, please read
  DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
  won't help unless you provide this information when reporting a possible bug.

我用的是toshiba本本,显卡ati redeon mobility m9,系统是redhat 9.0 kernel 2.6.4,另外,我的cpu是1.5G,可程序错认为了1.677G.
请大家多少给指个解决方向.

pinkme005

帮你顶一下

dalin

[quote:6796295523="emlxm"]借地方一用谢谢：

我自己编译的1.03的，我想播放网上的流媒体，在输入地址（比如rtsp：//......）后，然后他会自动的在前面加一个http:// 请问有办法可以解决嘛？？
或者是重新编译需要注意的参数问题？？
谢谢！[/quote]去 live.com 下载个live库，装完后重新编译一下mplayer，加上--enable-live。
live.com有详细介绍，很简单的。

emlxm

ok,搞定！
谢谢 dalin

樱家冢

live.com上面的东东是mplayer的rtsp支持库？