求救！今不了X－windows !

ludascut

系统安装的版主叫我贴到这边来
都重装了四五遍了，还是进不了X！！也不知道哪儿出了问题！希望各位高手给看看！！
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "nv"
Option "UseFBDev" "true"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-70
VertRefresh 50-160
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

### END DEBCONF SECTION

这里是log的最后几行！是不是显卡驱动的问题？
我的显卡是GFMX440的！
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
GeForce3 (rev 3)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].

听几位老大的建议，把 Option "UseFBDev" "true" 注释掉了（＃Option "UseFBDev" "true"）！但还是不行！显示
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [email protected] and patches submitted
to [email protected]. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.20-8um i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Oct 5 15:04:23 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Parse error on line 16 of section (null) in file /etc/X11/XF86Config-4
"
" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].


__________________

sunmoon1997

用这个吧：
[code:1]# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        #FontPath       "unix/:7100"
    FontPath    "/usr/share/fonts"
    FontPath    "/usr/share/fonts/ttf/zh_CN"
    FontPath    "/usr/share/fonts/misc"
    FontPath    "/usr/share/fonts/100dpi"
    FontPath    "/usr/share/fonts/75dpi"
    FontPath    "/usr/share/fonts/cyrillic"
    FontPath    "/usr/share/fonts/TTF"
    FontPath    "/usr/share/fonts/Type1"
    FontPath    "/usr/share/fonts/ukr"
    FontPath    "/usr/local/share/fonts"
    FontPath    "/usr/X11R6/lib/X11/fonts"
    FontPath    "/usr/share/fonts/local"
    FontPath    "/usr/share/fonts/ttf"
    FontPath    "/usr/share/fonts/ttf/zh_TW"
    FontPath    "/usr/share/fonts/baekmuk"
    FontPath    "/usr/share/fonts/zh_CN"
    FontPath    "/usr/share/fonts/ttf/korean"
    FontPath    "/usr/X11R6/lib/X11/fonts/TrueType"
EndSection

Section "Module"
        Load  "glx"
        Load  "extmod"
        Load  "dbe"
        #Load  "fbdevhw"
        Load  "record"
        Load  "freetype"
        #Load  "type1"
        #Load  "dri"
        #Load  "xtt"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#       Option  "XkbOptions"    "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "keyboard"

        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "en_US"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Unknown"
        ModelName    "0"
        HorizSync    30.0 - 70.0
        VertRefresh  50.0 - 160.0
        Option      "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nvidia"
        VendorName  "Videocard vendor"
        BoardName   "NVIDIA GeForce 2 MX/MX400"
        Option      "NvAGP" "1"
        #Option     "AGPMode"  "4"
        Option      "AGPFastWrite" "True"
        Option      "CursorShadow" "true"
        Option      "CursorShadowAlpha" "70"
        Option      "CursorShadowXOffset" "4"
        Option      "CursorShadowYOffset" "3"
        #Option      "EnablePageFlip" "True"
        #Option      "RenderAccel" "1"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection[/code:1]

linky_fan

    
我说楼上的大哥，别人连nvidia的驱动都还没装呢

linky_fan

你用的是stable也就是woody的debian吧，xfree86的版本好低啊
gf4对它来说新了点，look this
引用:

NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
GeForce3 (rev 3)

没有gf4的

引用:

XFree86 Version 4.1.0.1 / X Window System

4.1.0.1

引用:

Parse error on line 16 of section (null) in file /etc/X11/XF86Config-4

这句话说明你的/etc/X11/XF86Config-4第16行有错，好像应该是非空的。

我觉得可以话升级到sarge或是sid，对新硬件的支持好点。在你原来的基础上装个显卡驱动觉得意义不大(当然装是可以装的).

dicro

# Load "freetype"

try it ok?

It`s new Debian OS,can`t witer chinese now!

ludascut

呵呵！重新安装了hiweed ddbian，方便多了！

linky_fan

        

teampro

Driver "nv"
change the driver name "nv" to "vesa". that is it.

vesa is a universal graphic driver. because you have not install the nvidia driver yet, you can't use the driver name nv.