mplayer安装好了,但有问题,提示信息如下

fsqiang

前面的步骤就不写了,从make install开始

[root@FENGSQ MPlayer-1.0pre5]# make install
make[1]: Entering directory `/root/MPlayer-1.0pre5/libdha'
mkdir -p /usr/local/lib
install -m 755 -s -p libdha.so.1.0  /usr/local/lib/libdha.so.1.0
rm -f /usr/local/lib/libdha.so
ln -sf libdha.so.1.0  /usr/local/lib/libdha.so.1
ldconfig
make[1]: Leaving directory `/root/MPlayer-1.0pre5/libdha'
make[1]: Entering directory `/root/MPlayer-1.0pre5/vidix'
make[2]: Entering directory `/root/MPlayer-1.0pre5/vidix/drivers'
mkdir -p /usr/local/lib/mplayer/vidix
install -m 755 -s -p *.so /usr/local/lib/mplayer/vidix
make[2]: Leaving directory `/root/MPlayer-1.0pre5/vidix/drivers'
make[1]: Leaving directory `/root/MPlayer-1.0pre5/vidix'
[root@FENGSQ MPlayer-1.0pre5]# cp /root/font-arial-iso-8859-1/font-arial-14-iso-8859-1/* /usr/local/share/mplayer/font/
cp：是否覆盖‘/usr/local/share/mplayer/font/font.desc’? y
cp：是否覆盖‘/usr/local/share/mplayer/font/iso-8859-1-a.raw’? y
cp：是否覆盖‘/usr/local/share/mplayer/font/iso-8859-1-b.raw’? y
cp：是否覆盖‘/usr/local/share/mplayer/font/osd-mplayer-a.raw’? y
cp：是否覆盖‘/usr/local/share/mplayer/font/osd-mplayer-b.raw’? y
[root@FENGSQ MPlayer-1.0pre5]# y
bash: y: command not found
[root@FENGSQ MPlayer-1.0pre5]# cp -r /root/plastic /usr/local/share/mplayer/Skin/default
[root@FENGSQ MPlayer-1.0pre5]# cp /root/MPlayer-1.0pre5/etc/input.conf /usr/local/share/mplayer/
cp：是否覆盖‘/usr/local/share/mplayer/input.conf’? y
[root@FENGSQ MPlayer-1.0pre5]# gmplayer
MPlayer 1.0pre5-3.2.2 (C) 2000-2004 MPlayer Team

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville 802.3 MHz (Family: 6, Stepping: 3)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf: No such file or directory
vo: X11 running at 800x600 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': 没 有那个文件或目录
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/codecs.conf': 没有那个文件或目录
使用内建默认的codecs.conf.
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
使用Linux的硬件RTC计时(1024Hz)
Can't open input config file /root/.mplayer/input.conf: 没有那个文件或目录
Can't open input config file /usr/local/etc/mplayer/input.conf: 没有那个文件或目录
Falling back on default (hardcoded) input config
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'

播放 /mnt/windowsD/take_me_to_your_heart.rm.
检测到REAL文件格式。
======= WAVE Format =======
Format Tag: 28515 (0x6F63)
Channels: 2
Samplerate: 44100
avg byte/sec: 44100
Block align: 640
bits/sample: 16
cbSize: 26
Unknown extra header dump: [80] [0] [10] [0] [17] [0] [80] [2] [10] [0] [1] [0] [0] [3] [8] [0] [0] [25] [0] [0] [0] [0] [0] [2] [0] [4]
===========================
Not audio/video stream or unsupported!
VIDEO:  RV30 [30202002,010A9030]  320x240  (aspect 0.00)  25.00 fps
Clip info:
name: take me to your heart (Music Video)
author: Michael Learns To Rock
copyright: Capitol Denmark / EMI Medley
==========================================================================
打开音频解码器: [realaud] RealAudio decoder
opening shared obj '/usr/lib/essential-20050115/cook.so.6.0'
Audio codec: [23] 44 Kbps Stereo Music High - RA8
Audio bitrate: 44.100 kbit/s (5513 bps)
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 5513->176400 (44.1 kbit)
Selected audio codec: [racook] afm:realaud (RealAudio COOK)
==========================================================================
==========================================================================
打开视频解码器: [realvid] RealVideo decoder
opening shared obj '/usr/lib/essential-20050115/drv3.so.6.0'
Selected video codec: [rv30] vfm:realvid (Linux RealPlayer 8 RV30 decoder)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
开始播放...
VDec: vo配置要求 - 320 x 240 (选择 csp: Planar I420)
VDec: using Planar I420 as output csp (no 0)
电影宽高比为 1.33:1 - 预放大到正确的电影宽高比.
VO: [xv] 320x240 => 320x240 Planar I420
A:  71.3 V:  70.6 A-V:  0.769 ct:  0.387  1758/1758  11%  4%  3.4% 50 0 0%

         ************************************************
         ****       你的系统太慢了，放不了这个！     ****
         ************************************************
可能的原因，问题，解决办法：
- 最普遍的原因：损坏的或有bug的_音频_驱动
  - 试试-ao sdl或使用 ALSA 0.5或ALSA 0.9的oss模拟。
  - 试试不同的-autosync的值，不妨从30开始。
- 视频输出太慢
  - 试试不同的-vo driver(-vo help有列表)或者试试-framedrop！
- cpu太慢
  - 不要试图在慢速cpu上播放大的dvd/divx! 试试-hardframedrop。
- 损坏的文件
  - 试试下列选项的不同组合：-nobps  -ni  -mc 0  -forceidx
- Slow media (NFS/SMB mounts, DVD, VCD etc)
  - 试试 -cache 8192。
- 你使用-cache选项播放一个非交错的avi文件？
  - 试试-nocache
阅读DOCS/zh/video.html和DOCS/zh/sound.html来寻找调整/加速的技巧。
如果这些一个都用不上，阅读DOCS/zh/bugreports.html！

A:  -1.8 V: 239.8 A-V:-241.570 ct:  0.613  5980/5980  11%  3%  3.4% 80 0 0%

播放 /mnt/windowsD/2004华语精选1/10-王蓉-我不是黄蓉.mp3.
检测到音频文件!
Clip info:
Title: 我不是黄蓉
Artist: 王蓉
Album:
Year:
Comment:
Genre: Unknown
==========================================================================
打开音频解码器: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 32000 Hz, 2 ch, 16 bit (0x10), ratio: 16000->128000 (128.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Checking audio filter chain for 32000Hz/2ch/16bit -> 32000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 32000 hz, little endian signed int
AF_pre: 32000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 32000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 32000Hz/2ch/16bit -> 32000Hz/2ch/16bit...
视频: no video
开始播放...
A:      3:38.2  1.7% 0%

播放 /mnt/windowsD/2004华语精选/34-刘若英-听说？.mp3.
检测到音频文件!
==========================================================================
打开音频解码器: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 24000->176400 (192.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
视频: no video
开始播放...
A:      4:03.4  2.4% 0%







---------------------------------
运行gmplayer以后出现界面
试了一下播放mp3和rm都没问题
但是从提示信息看好像有点不对啊

截图如下

fsqiang

[root@FENGSQ MPlayer-1.0pre5]# gmplayer
MPlayer 1.0pre5-3.2.2 (C) 2000-2004 MPlayer Team

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville 802.3 MHz (Family: 6, St
epping: 3)
Detected cache-line size is 32 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
针对有扩展指令集x86 CPU编译: MMX MMX2 SSE

Reading config file /usr/local/etc/mplayer/mplayer.conf: 没有那个文件或目录
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf
vo: X11 running at 800x600 with depth 24 and 32 bpp (":0.0" => local display)
Reading /root/.mplayer/codecs.conf: Can't open '/root/.mplayer/codecs.conf': 没
有那个文件或目录
Reading /usr/local/etc/mplayer/codecs.conf: Can't open '/usr/local/etc/mplayer/c
odecs.conf': 没有那个文件或目录
使用内建默认的codecs.conf.
font: can't open file: /root/.mplayer/font/font.desc
Font /usr/local/share/mplayer/font/font.desc loaded successfully! (206 chars)
使用Linux的硬件RTC计时(1024Hz)
Can't open input config file /root/.mplayer/input.conf: 没有那个文件或目录
Can't open input config file /usr/local/etc/mplayer/input.conf: 没有那个文件或目                             录
Falling back on default (hardcoded) input config
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'

播放 /mnt/windowsD/2004华语精选/31-谭咏麟-披着羊皮狼.mp3.
检测到音频文件!
==========================================================================
打开音频解码器: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: 24000->176400 (192.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Checking audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 44100 hz, little endian signed int
AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 44100Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 44100Hz/2ch/16bit -> 44100Hz/2ch/16bit...
视频: no video
开始播放...

fsqiang

pic

bart

mplayer会到多个地方读取config信息，只要有一处有就可以了，不必担心那些找不到的文件和目录。

jiangtao9999

************************************************
**** 你的系统太慢了，放不了这个！ ****
************************************************