QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 2900|回复: 10

Epox-8NPAI主板集成网卡驱动问题。

[复制链接]
发表于 2006-2-4 11:39:50 | 显示全部楼层 |阅读模式
装Debian,到了网卡哪儿过不去。找不到驱动,没办法只好跳过。

现在想安装网卡驱动,但是主板官方网站上没有啊。

http://www.epox.cn/product/product.php?board_name=RVAtOE5QQUk=

主板说明书上网卡芯片组介绍
板载Realtek RTL8201 PHY整合10/100Mbps高速以太网络控制器

请问应该去哪儿找这个驱动啊?
发表于 2006-2-4 22:16:45 | 显示全部楼层
似乎要驱动的不是RTL8201
[code:1]The Ethernet hardware consists of two parts: a PHY chip, and a MAC chip. It's the MAC chip that requires the drivers. RTL8201x is a PHY only chip which does NOT need any driver at all. If you have RTL8201x in your computer system, there must be another MAC chip in the system too. Most likely, the MAC chip is embedded in the chipset. Please contact the board or computer provider to find out which MAC chip is in your system and how to get the drivers for it.[/code:1]

这里也有人问
http://www.linuxsir.org/bbs/showthread.php?t=202707
回复

使用道具 举报

发表于 2006-2-4 23:08:41 | 显示全部楼层
可以下载nvidia的主板驱动,包含网卡驱动,不过我的总掉线,干脆10元买了个旧网卡插上了事
回复

使用道具 举报

 楼主| 发表于 2006-2-5 10:17:02 | 显示全部楼层
我有个8139的。直接装上就行了?
需要设置不?
如果接在第一PCI槽还是eth0?
那板载是哪个?
回复

使用道具 举报

发表于 2006-2-5 21:21:57 | 显示全部楼层
直接插上,在bios里屏蔽掉板载网卡,就可以了,系统完全可以正常驱动8139的独立网卡,不需要其他的设置。
随便插在哪个插槽都可以。
回复

使用道具 举报

 楼主| 发表于 2006-2-6 12:22:17 | 显示全部楼层
恩。找个旧的8139上去就好了。自动识别。

请问一下板载网卡的编号应该是多少?优先级应该比PCI上的高吧?
回复

使用道具 举报

发表于 2006-2-6 18:33:23 | 显示全部楼层
要用nv网站上得nforce驱动的
回复

使用道具 举报

 楼主| 发表于 2006-2-7 09:34:48 | 显示全部楼层
呵呵。不管它了。
找个8139放上面了。
回复

使用道具 举报

发表于 2006-2-7 12:29:19 | 显示全部楼层
我是在bios里直接屏蔽到板载网卡的。不知道你说的编号是什么意思?eth0 eth1???
驱动不了留之无用啊?
回复

使用道具 举报

 楼主| 发表于 2006-2-11 08:26:43 | 显示全部楼层
恩。我也是屏蔽板载,然后装8139的。

对,想问问板载应该是eth*?
回复

使用道具 举报

发表于 2006-2-11 23:14:16 | 显示全部楼层
对,想问问板载应该是eth*?

一般是eth0
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-7-3 13:54 , Processed in 0.068508 second(s), 16 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表