ati驱动安装好后，每次开始分辨率都是1280×1024。

sunch1 · 发表于 2006-7-27 17:11:07

按照置顶的方法安装好ati驱动后，进入x-windows后，分辨率都是1280×1024。修改成1024×768后，重启后还是老样子。按照置顶ati驱动安装中5楼的办法也没用。现在我贴出我的xorg。conf文件，大家看看怎么修改好！

# XFree86 4 configuration created by MagicInstaller.

Section "ServerLayout"
Identifier    "Default Layout"
Screen    0  "aticonfig-Screen[0]" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath    "/usr/X11R6/lib/X11/rgb"
FontPath    "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath    "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath    "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath    "/usr/X11R6/lib/X11/fonts/misc"
FontPath    "/usr/X11R6/lib/X11/fonts/Type1"
FontPath    "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath    "/usr/X11R6/lib/X11/fonts/TTF"
FontPath    "/usr/share/fonts/default/Type1"
FontPath    "/usr/share/fonts/ttf/zh_CN"
EndSection

Section "Module"
Load  "dbe"
Load  "extmod"
Load  "fbdevhw"
Load  "glx"
Load  "record"
Load  "freetype"
Load  "type1"
Load  "dri"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver    "kbd"
Option       "XbkModel" "pc105"
Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver    "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/input/mice"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samsung SyncMaster 793DF/793MB"
HorizSync 30.0 - 71.0
VertRefresh  50.0 - 160.0
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option       "VendorName" "ATI Proprietary Driver"
Option       "ModelName" "Generic Autodetecting Monitor"
Option       "DPMS" "true"
EndSection

Section "Device"
Identifier  "Videocard0"
Driver    "radeon"
VendorName  "Videocard vendor"
BoardName "ATI Radeon 9600"
VideoRam 131072
EndSection

Section "Device"
Identifier  "aticonfig-Device[0]"
Driver    "fglrx"
EndSection

Section "Screen"
Identifier "Screen0"
Device    "Videocard0"
Monitor "Monitor0"
DefaultDepth    16
SubSection "Display"
Depth    16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device    "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth    24
SubSection "Display"
Viewport 0 0
Depth    24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection

sunch1 · 发表于 2006-7-27 19:38:09

z沉的这么快！？

loveccy · 发表于 2006-7-27 19:44:53

你定义了两个 screen ，看样子应该是用第二个 aticonfig-Screen[0] 吧。把“Modes "1024x768" "800x600" "640x480" ”加上试试？

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

jiangtao9999 · 发表于 2006-7-27 20:10:19

楼主放错地方了

sunch1 · 发表于 2006-7-27 20:40:57

[quote:9e621cd3ef="loveccy"]你定义了两个 screen ，看样子应该是用第二个 aticonfig-Screen[0] 吧。把“Modes "1024x768" "800x600" "640x480" ”加上试试？

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection[/quote]
问题已经解决非常感谢！
ps：为什么说我放错地方了呢》？

jiangtao9999 · 发表于 2006-7-27 20:58:14

两个 Screen 段。

Screen 0 "aticonfig-Screen[0]" 0 0

这里写了你的系统所使用的那个段的

Identifier "aticonfig-Screen[0]"

而你却

Identifier "Screen0"

所以你的 1024x768 放错地方了

sunch1 · 发表于 2006-7-27 21:19:18

哦是这样阿明白了。

		自动登录	找回密码
密码			注册

ati驱动安装好后，每次开始分辨率都是1280×1024。

本帖子中包含更多资源