校园网dr.com的使用问题

lyy97

我填好帐号和密码后
#
# This is the config file for drcom.
#
# Please read these notes before even attempting
# to edit this file:
# + Lines beginning with '#' are ignored.
# + Blank Lines are ignored.
# + Lines with more than 256 characters on it are
#   just stripped.
# + Valid characters are: a-z, A-Z, 0-9, space
#   and this set [#_=.,:]
# + This file is not syntax-checked, so you'll have
#   to edit it properly. I don't think you'll try to
#   do a buffer-overflow attack on your own machine.
# + Spaces get squeezed, so don't be afraid.
# + Unless otherwise specified, every variable must
#   be specified exactly once.
# + Variables that have default values don't need to
#   appear at all, but it's recommended that they do.
#

# Username and password
# A blank password is considered valid.
username=××××
password=××××

# Interface information

# mac is the MAC address of the nic we use to connect
# to the server.
# Example:
# mac=1a:2b:3c:4d:5e:6f
# If left blank it will default to 00:00:00:00:00:00

mac=00:0B:5D:D4:33:35

# nicn is the nth nic. This is the real data that's
# passed to the server, and thus I suggest you only
# fill in the first nic.
# Example:
# nic0=192.168.0.1
# nic1=
# nic2=
# nic3=
# Only nic0 is mandatory; the others should normally
# be left blank.

nic0=
nic1=
nic2=
nic3=

# dnsp(rimary) and dnss(econdary).

dnsp=202.112.14.151
dnss=202.112.14.161

# dhcp server address. Windows XP uses 255.255.255.255
# and Windows 2000 uses 0.0.0.0
# If left blank it defaults to 255.255.255.255

dhcp=

# Connection information
# If the network supports it, and serverip is set
# to 1.1.1.1, then the gateway will help us find
# the real server (beex said this was the reason
# why we had to upgrade, but I don't see the
# practical reason why)
# All are optional, if left blank, then:
# + hostip defaults to nic0
# + servip defaults to 1.1.1.1
# + hostport defaults to 61440 (0xf000)
# + servport defaults to 61440 (0xf000)
# Note: hostip can be given one of the special values
#       eth0, eth1, eth2, ... eth9 (I don't think
#       regular users would need eth10 :-P), which
#       corresponds to the inet address of the
#       interface.

hostip=
servip=202.115.255.243
hostport=
servport=

# Miscellaneous Machine Information
# We don't need to be honest about these.
# For example, Windows XP has a version number
# of 5.1 and a build number of 2600.
# All are optional, if left blank, then:
# + hostname defaults to "localhost"
# + winver defaults to 5.1
# + winbuild defaults to 2600
# + servicepack defaults to "Service Pack 2"

hostname=
winver=
winbuild=
servicepack=


[root@lyy rpm]# source /etc/profile
[root@lyy rpm]# modprobe drcom
FATAL: Module drcom not found.
[root@lyy rpm]# drcomcd
1160148019 DEBUG drcomcd: Redirecting stderr to /var/log/drcomcd...
[root@lyy rpm]# drcomc login
1160148028 DEBUG drcomc: Creating socket...
1160148028 DEBUG drcomc: Connecting...
drcomc: Connect: Connection refused
[root@lyy rpm]#           

上不了网，郁闷亚呀。

KDE

可能需要新版本

jiangtao9999

[root@lyy rpm]# modprobe drcom
FATAL: Module drcom not found.