|
|
楼主 |
发表于 2004-9-10 13:20:13
|
显示全部楼层
这个或许有用：
[code:1]# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/xorg-x11-6.8.0.ebuild,v 1.5 2004/09/09 08:30:43 seemant Exp $
# Set TDFX_RISKY to "yes" to get 16-bit, 1024x768 or higher on low-memory
# voodoo3 cards.
# Libraries which are now supplied in shared form that were not in the past
# include: libFS.so, libGLw.so, libI810XvMC.so, libXRes.so, libXfontcache.so,
# libXinerama.so, libXss.so, libXvMC.so, libXxf86rush.so, libfontenc.so,
# libxkbfile.so, libxkbui.so
# TODO
# 11 August 2004 <[email protected]>
# TARGET: patchset 0.2
# Nothing yet =)
inherit eutils flag-o-matic gcc xfree
# Make sure Portage does _NOT_ strip symbols. We will do it later and make sure
# that only we only strip stuff that are safe to strip ...
RESTRICT="nostrip"
# IUSE="gatos" disabled because gatos is broken on ~4.4 now (31 Jan 2004)
IUSE="3dfx 3dnow bitmap-fonts cjk debug dlloader dmx doc insecure-drivers ipv6 mmx nls pam sdk sse static xprint"
# IUSE_INPUT_DEVICES="synaptics wacom"
FILES_VER="0.1"
PATCH_VER="0.1"
XCUR_VER="0.3.1"
#MGADRV_VER="1_3_0beta"
#VIADRV_VER="0.1"
XFSFT_ENC_VER="0.1"
S=${WORKDIR}/xc
HOMEPAGE="http://freedesktop.org/XOrg"
# Misc patches we may need to fetch ..
X_PATCHES="mirror://gentoo/${P}-patches-${PATCH_VER}.tar.bz2
http://dev.gentoo.org/~cyfred/distfiles/${P}-patches-${PATCH_VER}.tar.bz2"
X_DRIVERS=""
# mirror://gentoo/${P}-drivers-via-${VIADRV_VER}.tar.bz2"
# Latest Savage drivers: http://www.probo.com/timr/savage40.html
# Latest SIS drivers: http://www.winischhofer.net/
GENTOO_FILES="mirror://gentoo/${P}-files-${FILES_VER}.tar.bz2
http://dev.gentoo.org/~cyfred/distfiles/${P}-files-${FILES_VER}.tar.bz2"
SRC_URI="mirror://gentoo/eurofonts-X11.tar.bz2
http://dev.gentoo.org/~cyfred/xorg/${PN}/patchsets/${PV}/xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2
mirror://gentoo/gentoo-cursors-tad-${XCUR_VER}.tar.bz2
nls? ( mirror://gentoo/gemini-koi8-u.tar.bz2 )
${GENTOO_FILES}
${X_DRIVERS}
${X_PATCHES}
http://freedesktop.org/~xorg/X11R${PV}/src/X11R${PV}-src1.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src//X11R${PV}-src2.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src//X11R${PV}-src3.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src//X11R${PV}-src4.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src//X11R${PV}-src5.tar.gz
doc? (
http://freedesktop.org/~xorg/X11R${PV}/src//X11R${PV}-src6.tar.gz
http://freedesktop.org/~xorg/X11R${PV}/src//X11R${PV}-src7.tar.gz
)"
LICENSE="Adobe-X CID DEC DEC-2 IBM-X NVIDIA-X NetBSD SGI UCB-LBL XC-2
bigelow-holmes-urw-gmbh-luxi christopher-g-demetriou national-semiconductor
nokia tektronix the-open-group todd-c-miller x-truetype xfree86-1.0
MIT SGI-B BSD FTL | GPL-2"
SLOT="0"
KEYWORDS="~x86 ~amd64 ~ppc"
# Need portage-2.0.50_pre9 for `use !foo`
DEPEND=">=sys-apps/baselayout-1.8.3
>=sys-libs/ncurses-5.1
>=sys-libs/zlib-1.1.3-r2
>=sys-devel/flex-2.5.4a-r5
>=dev-libs/expat-1.95.3
>=media-libs/freetype-2.1.4
>=media-libs/fontconfig-2.1-r1
>=x11-base/opengl-update-1.7.2
>=x11-misc/ttmkfdir-3.0.9-r2
>=sys-apps/sed-4
sys-apps/util-linux
dev-lang/perl
media-libs/libpng
>=sys-apps/portage-2.0.50_pre9
dmx? ( app-text/sgmltools-lite )
!x11-base/xfree
!virtual/xft
!virtual/x11"
# x11-libs/xft -- blocked because of interference with xorg's
PDEPEND="x86? (
3dfx? ( >=media-libs/glide-v3-3.10 )
input_devices_synaptics? ( x11-misc/synaptics )
input_devices_wacom? ( x11-misc/linuxwacom )
)
alpha? (
3dfx? ( >=media-libs/glide-v3-3.10 )
)
x11-terms/xterm"
PROVIDE="virtual/x11
virtual/opengl
virtual/glu
virtual/xft"
DESCRIPTION="An X11 implementation maintained by the X.Org Foundation"
HOSTCONF="config/cf/host.def"
cflag_setup() {
# Set up CFLAGS
filter-flags "-funroll-loops"
ALLOWED_FLAGS="-fstack-protector -march -mcpu -O -O1 -O2 -O3 -pipe -fomit-frame-pointer -g -gstabs+ -gstabs -ggdb"
# arch-specific section added by popular demand
case "${ARCH}" in
mips) ALLOWED_FLAGS="${ALLOWED_FLAGS} -mips1 -mips2 -mips3 -mips4 -mabi" ;;
# -fomit-frame-pointer known to break things and is pointless
# according to ciaranm
sparc) filter-flags "-fomit-frame-pointer" ;;
# gcc-3.3.2 causes invalid insn error
hppa ) replace-cpu-flags 1.0 2.0 ;;
esac
# Recently there has been a lot of stability problem in Gentoo-land. Many
# things can be the cause to this, but I believe that it is due to gcc3
# still having issues with optimizations, or with it not filtering bad
# combinations (protecting the user maybe from themselves) yet.
#
# This can clearly be seen in large builds like glibc, where too aggressive
# CFLAGS cause the tests to fail miserbly.
#
# Quote from Nick Jones <[email protected]>, who in my opinion
# knows what he is talking about:
#
# People really shouldn't force code-specific options on... It's a
# bad idea. The -march options aren't just to look pretty. They enable
# options that are sensible (and include sse,mmx,3dnow when appropriate).
#
# The next command strips CFLAGS and CXXFLAGS from nearly all flags. If
# you do not like it, comment it, but do not bugreport if you run into
# problems.
#
# <[email protected]> (13 Oct 2002)
strip-flags
}
pkg_setup() {
FILES_DIR="${WORKDIR}/files"
PATCHDIR="${WORKDIR}/patch"
EXCLUDED="${PATCHDIR}/excluded"
# Set up CFLAG-related things
cflag_setup
# Set up CC variable, we use it later
gcc-getCC
# See bug #35468, circular pam-X11 dep
if use pam && [ "`best_version x11-base/${PN}`" ]
then
einfo "Previous ${PN} installation detected"
einfo "Enabling PAM features in ${PN}..."
else
einfo "Previous ${PN} installation NOT detected"
einfo "Disabling PAM features in ${PN}..."
einfo "You must remerge ${PN} to enable pam."
einfo "See http://bugs.gentoo.org/show_bug.cgi?id=35468."
fi
if use static || use dlloader
then
# A static build disallows building the SDK.
# See config/xf86.rules.
# So does a DllModules YES (use dlloader) build (#50562)
# The latter is pending a potential patch.
if use sdk
then
die "The static and dlloader USE flags are currently incompatible with the sdk USE flag."
fi
fi
# on amd64 we need /usr/X11R6/lib64/X11/locale/lib to be a symlink
# created by the emul lib ebuild in order for adobe acrobat, staroffice,
# and a few other apps to work.
use amd64 && get_libdir_override lib64
# lib32 isnt a supported configuration (yet?)
[ "${CONF_LIBDIR}" == "lib32" ] && get_libdir_override lib
# Echo a message to the user about xprint and bitmap-fonts
if ! use bitmap-fonts
then
ewarn "Please emerge this with USE=\"bitmap-fonts\" to enable"
ewarn "75dpi and 100dpi fonts. Your GTK+-1.2 fonts may look"
ewarn "screwy otherwise"
fi
if ! use xprint
then
ewarn "Please emerge thie with USE=\"xprint\" to enable"
ewarn "the Xprint extenstion -- Motif and motif apps will break"
ewarn "without it."
fi
if ! use bitmap-fonts || ! use xprint
then
ebeep 5
epause 10
fi
}
host_def_setup() {
HOSTCONF=config/cf/host.def
ebegin "Setting up ${HOSTCONF}"
cd ${S}; cp ${FILES_DIR}/site.def ${HOSTCONF} || die
echo "#define XVendorString \"Gentoo Linux (The X.Org Foundation ${PV}, revision ${PR}-${PATCH_VER})\"" \
>> ${HOSTCONF}
# Pending http://bugs.gentoo.org/show_bug.cgi?id=49038 and
# http://freedesktop.org/cgi-bin/bugzilla/show_bug.cgi?id=600
#
# Makes ld bail at link time on undefined symbols
# Suggested by Mike Harris <[email protected]>
#echo "#define SharedLibraryLoadFlags -shared -Wl,-z,defs" \
# >> ${HOSTCONF}
# Enable i810 on x86_64 (RH #126687)
echo "#define XF86ExtraCardDrivers i810" >> ${HOSTCONF}
# FHS install locations for docs
echo "#define ManDirectoryRoot /usr/share/man" >> ${HOSTCONF}
echo "#define DocDir /usr/share/doc/${PF}" >> ${HOSTCONF}
echo "#define FontDir /usr/share/fonts" >> ${HOSTCONF}
# Make man4 and man7 stuff get 'x' suffix like everything else
# Necessary so we can install to /usr/share/man without overwriting
echo "#define DriverManDir \$(MANSOURCEPATH)4" >> ${HOSTCONF}
echo "#define DriverManSuffix 4x /* use just one tab or cpp will die */" \
>> ${HOSTCONF}
echo "#define MiscManDir \$(MANSOURCEPATH)7" >> ${HOSTCONF}
echo "#define MiscManSuffix 7x /* use just one tab or cpp will die */" \
>> ${HOSTCONF}
# Don't build xterm -- use external (#54051)
echo "#define BuildXterm NO" >> ${HOSTCONF}
# Xwrapper has been removed so we now need to use the set uid server
# again, this mustve happened somewhere after 4.3.0 in the development.
echo "#define InstallXserverSetUID YES" >> ${HOSTCONF}
echo "#define BuildServersOnly NO" >> ${HOSTCONF}
# Don't use /lib64 if $(get_libdir) != lib64
# Replaces 0181_all_4.3.0-amd64-nolib64.patch
if [ "$(get_libdir)" == "lib64" ] ; then
echo "#define HaveLib64 YES" >> ${HOSTCONF}
else
echo "#define HaveLib64 NO" >> ${HOSTCONF}
fi
# Set location of DRM source to be installed
echo "#define InstSrcDir ${ROOT}/usr/src/${PF}" >> ${HOSTCONF}
# Bug #12775 .. fails with -Os.
replace-flags "-Os" "-O2"
if [ "`gcc-version`" != "2.95" ]
then
# Should fix bug #4189. gcc 3.x have problems with -march=pentium4
# and -march=athlon-tbird
# Seems fixed on 3.3 and higher
if [ "`gcc-major-version`" -eq "3" -a "`gcc-minor-version`" -le "2" ]
then
replace-cpu-flags "pentium3" "pentium4"
replace-cpu-flags "athlon-tbird" "athlon"
fi
# Try a fix for #49310, see #50931 for more info. <spyderous>
if [ "`is-flag -fomit-frame-pointer`" ]
then
replace-cpu-flags "i586" "k6" "k6-2" "k6-3"
fi
# Without this, modules breaks with gcc3
if [ "`gcc-version`" = "3.1" ]
then
append-flags "-fno-merge-constants"
append-flags "-fno-merge-constants"
fi
fi
if ( [ -e "${ROOT}/usr/src/linux" ] && \
[ ! `is_kernel "2" "2"` ] ) || \
[ "`uname -r | cut -d. -f1,2`" != "2.2" ]
then
echo "#define HasLinuxInput YES" >> ${HOSTCONF}
fi
echo "#define CcCmd ${CC}" >> ${HOSTCONF}
echo "#define OptimizedCDebugFlags ${CFLAGS} GccAliasingArgs" >> ${HOSTCONF}
echo "#define OptimizedCplusplusDebugFlags ${CXXFLAGS} GccAliasingArgs" >> ${HOSTCONF}
if use static
then
echo "#define DoLoadableServer NO" >>${HOSTCONF}
else
if use dlloader ; then
einfo "Setting DoLoadableServer/MakeDllModules to YES."
echo "#define DoLoadableServer YES" >> ${HOSTCONF}
echo "#define MakeDllModules YES" >> ${HOSTCONF}
fi
fi
use_build debug XFree86Devel
use_build debug BuildDebug
use_build debug DebuggableLibraries
if use !debug
then
echo "#define ExtraXInputDrivers acecad" >> ${HOSTCONF}
# use less ram .. got this from Spider's makeedit.eclass :)
echo "#define GccWarningOptions -Wno-return-type -w" \
>> ${HOSTCONF}
fi
# Remove circular dep between pam and X11, bug #35468
# If pam is in USE and we have X11, then we can enable PAM
# if use pam && [ "`best_version x11-base/xorg-x11`" ]
if [ "`best_version x11-base/xorg-x11`" ]
then
# If you want to have optional pam support, do it properly ...
use_build pam HasPam
use_build pam HasPamMisc
fi
if use x86 || use alpha
then
# build with glide3 support? (build the tdfx_dri.o module)
if use 3dfx
then
echo "#define HasGlide3 YES" >> ${HOSTCONF}
fi
# This won't work unless we can disable building the tdfx stuff
# entirely :/
# use_build 3dfx HasGlide3
fi
if use x86
then
# optimize Mesa for architecture
use_build mmx HasMMXSupport
use_build mmx MesaUseMMX
use_build 3dnow Has3DNowSupport
use_build 3dnow MesaUse3DNow
use_build sse HasKatmaiSupport
use_build sse MesaUseKatmai
use_build sse HasSSESupport
use_build sse MesaUseSSE
# Compile the VIA driver
# echo "#define XF86ExtraCardDrivers via" >> ${HOSTCONF}
fi
if use hppa
then
echo "#define DoLoadableServer NO" >> ${HOSTCONF}
fi
if use alpha
then
echo "#define XF86CardDrivers mga nv tga s3virge sis rendition \
i740 tdfx cirrus tseng fbdev \
ati vga v4l glint" >> ${HOSTCONF}
fi
if use ppc
then
echo "#define XF86CardDrivers mga glint s3virge sis savage trident \
chips tdfx fbdev ati DevelDrivers vga nv imstt \
XF86OSCardDrivers XF86ExtraCardDrivers" >> ${HOSTCONF}
fi
if use ppc64
then
echo "#define MakeDllModules YES" >> ${HOSTCONF}
echo "#define XF86VgaHw YES" >> ${HOSTCONF}
echo "#define XF86FBDevHw YES" >> ${HOSTCONF}
echo "#define XF86CardDrivers fbdev v4l ati vga nv" >> ${HOSTCONF}
fi
if use sparc
then
echo "#define XF86CardDrivers sunffb sunleo suncg6 suncg3 suncg14 \
suntcx sunbw2 glint mga tdfx ati savage vesa vga fbdev \
XF86OSCardDrivers XF86ExtraCardDrivers \
DevelDrivers" >> ${HOSTCONF}
fi
# The definitions for fontconfig
echo "#define UseFontconfig YES" >> ${HOSTCONF}
echo "#define HasFontconfig YES" >> ${HOSTCONF}
# Use the xorg Xft2 lib
echo "#define SharedLibXft YES" >> ${HOSTCONF}
# with USE="X doc' circular dep w/ virtual/ghostscript
# echo "#define HasGhostScript ${DOC}" >> ${HOSTCONF}
# Caused issues, basic docs aren't installed
use_build doc BuildLinuxDocText
use_build doc BuildLinuxDocPS
use_build doc BuildSpecsDocs
use_build doc BuildHtmlManPages
use_build doc InstallHardcopyDocs
# enable Japanese docs, optionally
use doc && use_build cjk InstallJapaneseDocs
# Native Language Support Fonts
use_build nls BuildCyrillicFonts
use_build nls BuildArabicFonts
use_build nls BuildGreekFonts
use_build nls BuildHebrewFonts
use_build nls BuildThaiFonts
if use nls
then
use_build cjk BuildCIDFonts
use_build cjk BuildJapaneseFonts
use_build cjk BuildKoreanFonts
use_build cjk BuildChineseFonts
fi
# Crappy bitmap fonts
use_build bitmap-fonts Build75DpiFonts
use_build bitmap-fonts Build100DpiFonts
use_build dmx BuildDmx
use_build insecure-drivers BuildDevelDRIDrivers
if use ipv6
then
# In case Gentoo ever works on a system with IPv6 sockets that don't
# also listen on IPv4 (see config/cf/X11.tmpl)
echo "#define PreferXdmcpIPv6 YES" >> ${HOSTCONF}
fi
use_build ipv6 BuildIPv6
# Ajax is the man for getting this going for us
echo "#define ProPoliceSupport YES" >> ${HOSTCONF}
# Make xprint optional
use_build xprint BuildXprint
# End the host.def definitions here
eend 0
}
patch_setup() {
einfo "Excluding patches..."
# These have been applied upstream
patch_exclude 1770 1771 1772 1773
# This patch is just plain broken. Results in random failures.
patch_exclude 0120*parallel-make
# Hardened patches (both broken)
patch_exclude 9960_all_4.3.0-exec-shield-GNU
patch_exclude 9961_all_4.3.0-libGL-exec-shield
# this patch comments out the Xserver line in xdm's config
# We only want it here
if use !s390
then
patch_exclude 7500
fi
# if use !gatos
# then
patch_exclude 9841_all_4.3.0-gatos-mesa
# fi
if use debug
then
patch_exclude 5901*acecad-debug
fi
# TDFX_RISKY - 16-bit, 1024x768 or higher on low-memory voodoo3's
if use 3dfx && [ "${TDFX_RISKY}" = "yes" ]
then
patch_exclude 5850
else
patch_exclude 5851
fi
einfo "Done excluding patches"
}
src_unpack() {
# Unpack source and patches
ebegin "Unpacking source"
# unpack ${P}.tar.bz2
unpack X11R${PV}-src{1,2,3,4,5}.tar.gz
eend 0
if use doc
then
ebegin "Unpacking documentation"
unpack X11R${PV}-src{6,7}.tar.gz
eend 0
fi
ebegin "Unpacking Gentoo files and patches"
unpack ${P}-files-${FILES_VER}.tar.bz2 > /dev/null
unpack ${P}-patches-${PATCH_VER}.tar.bz2 > /dev/null
eend 0
# Unpack TaD's gentoo cursors
ebegin "Unpacking Gentoo cursors"
unpack gentoo-cursors-tad-${XCUR_VER}.tar.bz2 > /dev/null
eend 0
# Unpack extra fonts stuff from Mandrake
ebegin "Unpacking fonts"
if use nls
then
unpack gemini-koi8-u.tar.bz2 > /dev/null
fi
unpack eurofonts-X11.tar.bz2 > /dev/null
unpack xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 > /dev/null
eend 0
# Remove bum encoding
rm -f ${WORKDIR}/usr/share/fonts/encodings/urdunaqsh-0.enc
patch_setup
# Bulk patching - based on patch name
# Will create excluded stuff once it's needed
cd ${WORKDIR}
EPATCH_SUFFIX="patch" \
epatch ${PATCHDIR}
cd ${S}
#Gentoo Linux Chinese Portage
#http://gentoo.linuxsir.org
use glc && epath ${FILESDIR}/xorg-x11-6.7.0-gb18030.patch
host_def_setup
cd ${S}
if use doc
then
# These are not included anymore as they are obsolete
for x in ${S}/programs/Xserver/hw/xfree86/{XF98Conf.cpp,XF98Config}
do
if [ -f ${x} ]
then
cp ${x} ${x}.orig
grep -iv 'Load[[:space:]]*"\(pex5\|xie\)"' ${x}.orig > ${x}
rm -f ${x}.orig
fi
done
fi
}
src_compile() {
# Set MAKEOPTS to have proper -j? option ..
get_number_of_jobs
# If a user defines the MAKE_OPTS variable in /etc/make.conf instead of
# MAKEOPTS, they'll redefine an internal xorg Makefile variable and the
# xorg build will silently die. This is tricky to track down, so I'm
# adding a preemptive fix for this issue by making sure that MAKE_OPTS is
# unset. (drobbins, 08 Mar 2003)
unset MAKE_OPTS
einfo "Building xorg-x11..."
if use debug
then
FAST=1 makeg World WORLDOPTS="" || die
else
FAST=1 emake World WORLDOPTS="" || die
fi
if use nls
then
cd ${S}/nls
make || die
cd ${S}
fi
}
pkgconfig_install() {
# This one needs to be in /usr/lib
insinto /usr/$(get_libdir)/pkgconfig
doins ${D}/usr/X11R6/$(get_libdir)/pkgconfig/*.pc
# Now remove the invalid xft.pc, and co ...
rm -rf ${D}/usr/X11R6/$(get_libdir)/pkgconfig
}
backward_compat_setup() {
# Backwards compatibility for /usr/share move
G_FONTDIRS="CID Speedo TTF Type1 encodings local misc util"
if use bitmap-fonts
then
G_FONTDIRS="${G_FONTDIRS} 75dpi 100dpi"
fi
dodir /usr/X11R6/$(get_libdir)/X11/fonts/
for G_FONTDIR in ${G_FONTDIRS}
do
dosym ${ROOT}/usr/share/fonts/${G_FONTDIR} /usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR}
done
dosym ${ROOT}/usr/share/man /usr/X11R6/man
dosym ${ROOT}/usr/share/doc/${PF} /usr/X11R6/$(get_libdir)/X11/doc
}
compose_files_setup() {
# Hack from Mandrake (update ours that just created Compose files for
# all locales)
for x in $(find ${D}/usr/X11R6/$(get_libdir)/X11/locale/ -mindepth 1 -type d)
do
# make empty Compose files for some locales
# CJK must not have that file (otherwise XIM don't works some times)
case `basename ${x}` in
C|microsoft-*|iso8859-*|koi8-*)
if [ ! -f ${x}/Compose ]
then
touch ${x}/Compose
fi
;;
ja*|ko*|zh*)
if [ -r ${x}/Compose ]
then
rm -f ${x}/Compose
fi
;;
esac
done
# Another hack from Mandrake -- to fix dead + space for the us
# international keyboard
for i in ${D}/usr/X11R6/$(get_libdir)/X11/locale/*/Compose
do
sed -i \
-e 's/\(<dead_diaeresis> <space>\).*$/\1 : "\\"" quotedbl/' \
-e "s/\(<dead_acute> <space>\).*$/\1 : \"'\" apostrophe/" \
${i}
done
}
etc_files_install() {
insinto /etc/X11
# Install example config file
newins ${S}/programs/Xserver/hw/xfree86/xorg.conf xorg.conf.example
exeinto /etc/X11
# new session management script
doexe ${FILES_DIR}/chooser.sh
# new display manager script
doexe ${FILES_DIR}/startDM.sh
exeinto /etc/X11/Sessions
for x in ${FILES_DIR}/Sessions/*
do
[ -f ${x} ] && doexe ${x}
done
insinto /etc/env.d
doins ${FILES_DIR}/10xorg
insinto /etc/X11/xinit
doins ${FILES_DIR}/xinitrc
exeinto /etc/X11/xdm
doexe ${FILES_DIR}/Xsession ${FILES_DIR}/Xsetup_0
insinto /etc/X11/fs
newins ${FILES_DIR}/xfs.config config
if use pam
then
insinto /etc/pam.d
newins ${FILES_DIR}/xdm.pamd xdm
# Need to fix console permissions first
newins ${FILES_DIR}/xserver.pamd xserver
fi
exeinto /etc/init.d
newexe ${FILES_DIR}/xdm.start xdm
newexe ${FILES_DIR}/xfs.start xfs
insinto /etc/conf.d
newins ${FILES_DIR}/xfs.conf.d xfs
}
setup_dynamic_libgl() {
# next section is to setup the dynamic libGL stuff
ebegin "Moving libGL and friends for dynamic switching"
dodir /usr/$(get_libdir)/opengl/${PN}/{$(get_libdir),extensions,include}
local x=""
for x in ${D}/usr/X11R6/$(get_libdir)/libGL.so* \
${D}/usr/X11R6/$(get_libdir)/libGL.la \
${D}/usr/X11R6/$(get_libdir)/libGL.a \
${D}/usr/X11R6/$(get_libdir)/libMesaGL.so
do
if [ -f ${x} -o -L ${x} ]
then
# libGL.a cause problems with tuxracer, etc
mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/$(get_libdir)
fi
done
for x in ${D}/usr/X11R6/$(get_libdir)/modules/extensions/libglx*
do
if [ -f ${x} -o -L ${x} ]
then
mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/extensions
fi
done
# glext.h added for #54984
for x in ${D}/usr/X11R6/include/GL/{gl.h,glx.h,glxtokens.h,glext.h}
do
if [ -f ${x} -o -L ${x} ]
then
mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/include
fi
done
# Since we added glext.h and don't have new opengl-update yet, do this
# Avoids circular opengl-update/xorg-x11 dependency
dosym /usr/$(get_libdir)/opengl/${PN}/include/glext.h /usr/X11R6/include/GL/
# Even if libdir isnt lib, we need a lib symlink for opengl-update and
# friends. See bug 62990 for more info.
if [ "$(get_libdir)" != "lib" ]
then
dosym $(get_libdir) /usr/$(get_libdir)/opengl/${PN}/lib
fi
eend 0
}
strip_execs() {
if use debug
then
ewarn "Debug build turned on by USE=debug"
ewarn "NOT stripping binaries and libraries"
else
einfo "Stripping binaries and libraries..."
# This bit I got from Redhat ... strip binaries and drivers ..
# NOTE: We do NOT want to strip the drivers, modules or DRI modules!
for x in $(find ${D}/ -type f -perm +0111 -exec file {} \; | \
grep -v ' shared object,' | \
sed -n -e 's/^\(.*\):[ ]*ELF.*, not stripped/\1/p')
do
if [ -f ${x} ]
then
# Dont do the modules ...
if [ "${x/\/usr\/X11R6\/$(get_libdir)\/modules}" = "${x}" ]
then
echo "`echo ${x} | sed -e "s|${D}||"`"
strip ${x} || :
fi
fi
done
# Now do the libraries ...
for x in ${D}/usr/{$(get_libdir),$(get_libdir)/opengl/${PN}/$(get_libdir)}/*.so.* \
${D}/usr/X11R6/{$(get_libdir),$(get_libdir)/X11/locale/$(get_libdir)/common}/*.so.*
do
if [ -f ${x} ]
then
echo "`echo ${x} | sed -e "s|${D}||"`"
strip --strip-debug ${x} || :
fi
done
fi
}
setup_config_files() {
# Fix default config files after installing fonts to /usr/share/fonts
sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts:${ROOT}usr/share/fonts:g" \
${D}/etc/X11/xorg.conf.example
sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts:${ROOT}usr/share/fonts:g" \
${D}/etc/X11/fs/config
# Work around upgrade problem where people have
# Option "XkbRules" "xfree86" in their config file
sed -i "s:^.*Option.*"XkbRules".*$::g" ${D}/etc/X11/xorg.conf.example
}
update_config_files() {
# Fix any installed config files for installing fonts to /usr/share/fonts
# This *needs* to be after all other installation so files aren't
# overwritten.
if [ "${ROOT}" = "/" ]
then
einfo "Preparing any installed configuration files for font move..."
FILES="/etc/X11/xorg.conf
/etc/X11/XF86Config
/etc/X11/fs/config"
# /etc/fonts/fonts.conf
# /etc/fonts/local.conf
for FILE in ${FILES}
do
if [ -e ${FILE} ]
then
# New font paths
sed "s,/usr/X11R6/$(get_libdir)/X11/fonts,/usr/share/fonts,g" \
${ROOT}${FILE} > ${IMAGE}${FILE}
if [ "${FILE}" = "/etc/X11/xorg.conf" ]
then
# "keyboard" driver is deprecated and will be removed,
# switch to "kbd"
sed -i 's~^\([ \t]*Driver[ \t]\+\)"keyboard"~\1"kbd"~' \
${IMAGE}${FILE}
# Work around upgrade problem where people have
# Option "XkbRules" "xfree86" in their config file
sed -i "s:^.*Option.*\"XkbRules\".*$::g" \
${IMAGE}${FILE}
fi
fi
done
fi
}
src_install() {
unset MAKE_OPTS
einfo "Installing X.org X11..."
# gcc3 related fix. Do this during install, so that our
# whole build will not be compiled without mmx instructions.
if [ "`gcc-version`" != "2.95" ] && use x86
then
make install DESTDIR=${D} || \
make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \
CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \
install DESTDIR=${D} || die
else
make install DESTDIR=${D} || die
fi
if use sdk # || use gatos
then
einfo "Installing X.org X11 SDK..."
make install.sdk DESTDIR=${D} || die
fi
pkgconfig_install
einfo "Installing man pages..."
make install.man DESTDIR=${D} || die
einfo "Compressing man pages..."
prepman /usr/X11R6
if use nls
then
cd ${S}/nls
make DESTDIR=${D} install || die
fi
backward_compat_setup
# Fix permissions on locale/common/*.so
for x in ${D}/usr/X11R6/$(get_libdir)/X11/locale/$(get_libdir)/common/*.so*
do
if [ -f ${x} ]
then
fperms 0755 `echo ${x} | sed -e "s|${D}||"`
fi
done
# Fix permissions on modules ...
for x in $(find ${D}/usr/X11R6/$(get_libdir)/modules -name '*.o') \
$(find ${D}/usr/X11R6/$(get_libdir)/modules -name '*.so')
do
if [ -f ${x} ]
then
fperms 0755 `echo ${x} | sed -e "s|${D}||"`
fi
done
# We zap our CFLAGS in the host.def file, as hardcoded CFLAGS can
# mess up other things that use xmkmf
ebegin "Fixing $(get_libdir)/X11/config/host.def"
cp ${D}/usr/X11R6/$(get_libdir)/X11/config/host.def ${T}
awk '!/OptimizedCDebugFlags|OptimizedCplusplusDebugFlags|GccWarningOptions/ {print $0}' \
${T}/host.def > ${D}/usr/X11R6/$(get_libdir)/X11/config/host.def
# theoretically, /usr/X11R6/lib/X11/config is a possible candidate for
# config file management. If we find that people really worry about imake
# stuff, we may add it. But for now, we leave the dir unprotected.
eend 0
# EURO support
ebegin "Euro Support..."
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/X11R6/$(get_libdir)" \
${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-8x14.bdf | \
gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-8x14-lat9.pcf.gz
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/X11R6/$(get_libdir)" \
${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-9x16.bdf | \
gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-9x16-lat9.pcf.gz
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/X11R6/$(get_libdir)" \
${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-10x20.bdf | \
gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-10x20-lat9.pcf.gz
eend 0
# Standard symlinks
dodir /usr/{bin,include,$(get_libdir)}
dosym ../X11R6/bin /usr/bin/X11
dosym ../X11R6/include/X11 /usr/include/X11
dosym ../X11R6/include/DPS /usr/include/DPS
dosym ../X11R6/include/GL /usr/include/GL
dosym ../X11R6/$(get_libdir)/X11 /usr/$(get_libdir)/X11
dosym ../../usr/X11R6/$(get_libdir)/X11/xkb /etc/X11/xkb
# Some critical directories
keepdir /var/lib/xdm
dosym ../../../var/lib/xdm /etc/X11/xdm/authdir
# Remove invalid symlinks
rm -f ${D}/usr/$(get_libdir)/libGL.*
# Create required symlinks
dosym libGL.so.1.2 /usr/X11R6/$(get_libdir)/libGL.so
dosym libGL.so.1.2 /usr/X11R6/$(get_libdir)/libGL.so.1
dosym libGL.so.1.2 /usr/X11R6/$(get_libdir)/libMesaGL.so
# We move libGLU to /usr/lib now
dosym libGLU.so.1.3 /usr/$(get_libdir)/libMesaGLU.so
# .la files for libtool support
insinto /usr/X11R6/$(get_libdir)
doins ${FILES_DIR}/$(get_libdir)/*.la
# Backwards compat, FHS, etc.
dosym ../../usr/X11R6/bin/Xorg /etc/X11/X
# Fix perms
fperms 755 /usr/X11R6/$(get_libdir)/X11/xkb/geometry/sgi
fperms 755 /usr/X11R6/bin/dga
compose_files_setup
# Yet more Mandrake
ebegin "Encoding files for xfsft font server..."
dodir /usr/share/fonts/encodings
cp -a ${WORKDIR}/usr/share/fonts/encodings/* \
${D}/usr/share/fonts/encodings
for x in ${D}/usr/share/fonts/encodings/{.,large}/*.enc
do
[ -f "${x}" ] && gzip -9 -f ${x}
done
eend 0
if use nls
then
ebegin "gemini-koi8 fonts..."
cd ${WORKDIR}/ukr
gunzip *.Z
gzip -9 *.pcf
cd ${S}
cp -a ${WORKDIR}/ukr ${D}/usr/share/fonts
eend 0
fi
etc_files_install
# we want libGLU.so* in /usr/lib
mv ${D}/usr/X11R6/$(get_libdir)/libGLU.* ${D}/usr/$(get_libdir)
setup_dynamic_libgl
# Make the core cursor the default. People seem not to like whiteglass
# for some reason.
dosed 's:whiteglass:core:' /usr/share/cursors/${PN}/default/index.theme
strip_execs
# Install TaD's gentoo cursors
insinto /usr/share/cursors/${PN}/gentoo/cursors
doins ${WORKDIR}/cursors/gentoo/cursors/*
insinto /usr/share/cursors/${PN}/gentoo-blue/cursors
doins ${WORKDIR}/cursors/gentoo-blue/cursors/*
insinto /usr/share/cursors/${PN}/gentoo-silver/cursors
doins ${WORKDIR}/cursors/gentoo-silver/cursors/*
# Remove xterm app-defaults, since we don't install xterm
# rm ${D}/etc/X11/app-defaults/{UXTerm,XTerm,XTerm-color}
# For Battoussai's gatos stuffs:
if use sdk
then
insinto /usr/X11R6/$(get_libdir)/Server/include
doins ${S}/extras/drm/shared/drm.h
fi
# Remove the /etc/rc.d nonsense -- not everyone is RedHat
rm -rf ${D}/etc/rc.d
setup_config_files
}
pkg_preinst() {
update_config_files
for G_FONTDIR in ${G_FONTDIRS}
do
# Get rid of deprecated directories so our symlinks in the same location
# work -- users shouldn't be placing fonts here so that should be fine,
# they should be using ~/.fonts or /usr/share/fonts. <spyderous>
if [ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR} ]
then
# local directory is for sysadmin-added fonts, so save it
# Note: if we did this in src_install(), we would bring fonts from
# the build machine to the install machine rather than just moving
# fonts on the install machine.
if [ "${G_FONTDIR}" = "local" ]
then
mv ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR} \
${ROOT}/usr/share/fonts/
else
rm -rf ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/${G_FONTDIR}
fi
fi
# clean out old fonts.* and encodings.dir files, as we
# will regenerate them
# Not Speedo or CID, as their fonts.scale files are "real"
if [ "${G_FONTDIR}" != "CID" -a "${G_FONTDIR}" != "Speedo" ]
then
find ${ROOT}/usr/share/fonts/${G_FONTDIR} -type f -name 'fonts.*' \
-exec rm -f {} \;
find ${ROOT}/usr/share/fonts/${G_FONTDIR} -type f -name 'encodings.dir' \
-exec rm -f {} \;
fi
done
# No longer used by xorg-x11
if [ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/truetype ]
then
rm -rf ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/truetype
fi
if [ -L ${ROOT}/etc/X11/app-defaults ]
then
rm -f ${ROOT}/etc/X11/app-defaults
fi
if [ ! -L ${ROOT}/usr/X11R6/$(get_libdir)/X11/app-defaults ] && \
[ -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/app-defaults ]
then
if [ ! -d ${ROOT}/etc/X11/app-defaults ]
then
mkdir -p ${ROOT}/etc/X11/app-defaults
fi
mv -f ${ROOT}/usr/X11R6/$(get_libdir)/X11/app-defaults ${ROOT}/etc/X11
fi
if [ -L ${ROOT}/usr/X11R6/$(get_libdir)/X11/xkb ]
then
rm -f ${ROOT}/usr/X11R6/$(get_libdir)/X11/xkb
fi
if [ ! -L ${ROOT}/etc/X11/xkb ] && \
[ -d ${ROOT}/etc/X11/xkb ]
then
if [ ! -d ${ROOT}/usr/X11R6/$(get_libdir)/X11/xkb ]
then
mkdir -p ${ROOT}/usr/X11R6/$(get_libdir)/X11
fi
mv -f ${ROOT}/etc/X11/xkb ${ROOT}/usr/X11R6/$(get_libdir)/X11
fi
# clean the dynamic libGL stuff's home to ensure
# we don't have stale libs floating around
if [ -d ${ROOT}/usr/$(get_libdir)/opengl/${PN} ]
then
rm -rf ${ROOT}/usr/$(get_libdir)/opengl/${PN}/*
fi
# make sure we do not have any stale files lying around
# that could break things.
rm -f ${ROOT}/usr/X11R6/$(get_libdir)/libGL*
}
font_setup() {
# These cause ttmkfdir to segfault :/
rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.8x.enc.gz
rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.16.enc.gz
# rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-1.enc
# rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-2.enc
# rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-3.enc
# rm -f ${ROOT}/usr/share/fonts/encodings/suneu-greek.enc
# ********************************************************************
# A note about fonts and needed files:
#
# 1) Create /usr/share/fonts/encodings/encodings.dir
#
# 2) Create fonts.scale for TrueType fonts (need to do this before
# we create fonts.dir files, else fonts.dir files will be
# invalid for TrueType fonts...)
#
# 3) Now Generate fonts.dir files.
#
# CID fonts is a bit more involved, but as we do not install any,
# thus I am not going to bother.
#
# <[email protected]> (20 Oct 2002)
#
# ********************************************************************
ebegin "Generating encodings.dir..."
# Create the encodings.dir in /usr/share/fonts/encodings
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/mkfontdir -n \
-e ${ROOT}/usr/share/fonts/encodings \
-e ${ROOT}/usr/share/fonts/encodings/large \
-- ${ROOT}/usr/share/fonts/encodings
eend 0
if [ -x ${ROOT}/usr/X11R6/bin/ttmkfdir ]
then
ebegin "Creating fonts.scale files..."
for x in $(find ${ROOT}/usr/share/fonts/* -type d -maxdepth 1)
do
[ -z "$(ls ${x}/)" ] && continue
[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
# Only generate .scale files if truetype, opentype or type1
# fonts are present ...
# First truetype (ttf,ttc)
# NOTE: ttmkfdir does NOT work on type1 fonts (#53753)
# Also, there is no way to regenerate Speedo/CID fonts.scale
# <[email protected]> 2 August 2004
if [ "${x/encodings}" = "${x}" -a \
-n "$(find ${x} -iname '*.tt[cf]' -print)" ]
then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/ttmkfdir -x 2 \
-e ${ROOT}/usr/share/fonts/encodings/encodings.dir \
-o ${x}/fonts.scale -d ${x}
# Next type1 and opentype (pfa,pfb,otf,otc)
elif [ "${x/encodings}" = "${x}" -a \
-n "$(find ${x} -iname '*.[po][ft][abcf]' -print)" ]
then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/mkfontscale \
-a ${ROOT}/usr/share/fonts/encodings/encodings.dir \
-- ${x}
fi
done
eend 0
fi
ebegin "Generating fonts.dir files..."
for x in $(find ${ROOT}/usr/share/fonts/* -type d -maxdepth 1)
do
[ -z "$(ls ${x}/)" ] && continue
[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
if [ "${x/encodings}" = "${x}" ]
then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/mkfontdir \
-e ${ROOT}/usr/share/fonts/encodings \
-e ${ROOT}/usr/share/fonts/encodings/large \
-- ${x}
fi
done
eend 0
ebegin "Generating Xft cache..."
for x in $(find ${ROOT}/usr/share/fonts/* -type d -maxdepth 1)
do
[ -z "$(ls ${x}/)" ] && continue
[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
# Only generate XftCache files if there are truetype
# fonts present ...
if [ "${x/encodings}" = "${x}" -a \
-n "$(find ${x} -iname '*.[otps][pft][cfad]' -print)" ]
then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/$(get_libdir)" \
${ROOT}/usr/X11R6/bin/xftcache ${x} &> /dev/null
fi
done
eend 0
ebegin "Fixing permissions..."
find ${ROOT}/usr/share/fonts/ -type f -name 'font.*' \
-exec chmod 0644 {} \;
eend 0
# danarmak found out that fc-cache should be run AFTER all the above
# stuff, as otherwise the cache is invalid, and has to be run again
# as root anyway
if [ -x ${ROOT}/usr/bin/fc-cache ]
then
ebegin "Creating FC font cache..."
HOME="/root" ${ROOT}/usr/bin/fc-cache
eend 0
fi
}
print_info() {
if use 3dfx
then
echo
einfo "If using a 3DFX card, and you had \"3dfx\" in your USE flags,"
einfo "please merge media-libs/glide-v3 if you have not done so yet"
einfo "by doing:"
einfo
einfo " # emerge media-libs/glide-v3"
echo
fi
echo
einfo "Please note that the xcursors are in /usr/share/cursors/${PN}"
einfo "Any custom cursor sets should be placed in that directory"
echo
einfo "If you wish to set system-wide default cursors, please set"
einfo "them in /usr/local/share/cursors/${PN} so that future"
einfo "emerges will not overwrite those settings"
echo
einfo "Listening on TCP is disabled by default with startx."
einfo "To enable it, edit /usr/X11R6/bin/startx."
echo
echo
ewarn "BEWARE:"
ewarn "Font installation location has MOVED to:"
ewarn "/usr/share/fonts"
ewarn "Run etc-update to update your config files."
ewarn "Old locations for fonts, docs and man pages"
ewarn "are deprecated."
echo
ewarn "The configuration file has changed from that in XFree86."
ewarn "It is xorg.conf instead of XF86Config."
einfo "You may use xorgcfg, X -configure, or xorgconfig"
einfo "to create xorg.conf."
einfo "If XF86Config exists and xorg.conf does not, it will still"
einfo "read XF86Config."
# Try to get people to read /usr/share/fonts move
ebeep 5
epause 10
}
pkg_postinst() {
env-update
if [ "${ROOT}" = "/" ]
then
local x=""
umask 022
font_setup
# Switch to the xorg implementation.
# Use new opengl-update that will not reset user selected
# OpenGL interface ...
echo
if [ "`${ROOT}/usr/sbin/opengl-update --get-implementation`" = "xfree" ]
then
${ROOT}/usr/sbin/opengl-update ${PN}
else
${ROOT}/usr/sbin/opengl-update --use-old ${PN}
fi
fi
for x in $(find ${ROOT}/usr/X11R6/$(get_libdir)/X11/locale/ -mindepth 1 -type d)
do
# Remove old compose files we might have created incorrectly
# CJK must not have that file (otherwise XIM don't works some times)
case `basename ${x}` in
ja*|ko*|zh*)
if [ -r "${x}/Compose" ]
then
rm -f ${x}/Compose
fi
;;
esac
done
# These need to be owned by root and the correct permissions
# (bug #8281)
for x in ${ROOT}/tmp/.{ICE,X11}-unix
do
if [ ! -d ${x} ]
then
mkdir -p ${x}
fi
chown root:root ${x}
chmod 1777 ${x}
done
if use ppc64
then
#The problem about display driver is fixed.
cd ${ROOT}/usr/X11R6/$(get_libdir)/modules/drivers
mv fbdev_drv.so fbdev_drv.so.orig
mv ati_drv.so ati_drv.so.orig
mv nv_drv.so nv_drv.so.orig
ld -shared -o ${ROOT}/usr/X11R6/$(get_libdir)/modules/drivers/fbdev_drv.so ${ROOT}/usr/X11R6/$(get_libdir)/modules/drivers/fbdev_drv.so.orig ${ROOT}/usr/X11R6/$(get_libdir)/modules/linux/libfbdevhw.so ${ROOT}/usr/X11R6/$(get_libdir)/modules/libshadow.so ${ROOT}/usr/X11R6/$(get_libdir)/modules/libshadowfb.so ${ROOT}/usr/X11R6/$(get_libdir)/modules/libfb.so
ld -rpath ${ROOT}/usr/X11R6/$(get_libdir)/modules/drivers -shared -o ati_drv.so ati_drv.so.orig radeon_drv.so atimisc_drv.so fbdev_drv.so r128_drv.so vga_drv.so
ld -rpath ${ROOT}/usr/X11R6/$(get_libdir)/modules/drivers -shared -o nv_drv.so nv_drv.so.orig fbdev_drv.so vga_drv.so
#The problem about DRI module and GLX module is fixed.
cd ${ROOT}/usr/X11R6/$(get_libdir)/modules/extensions
mv libglx.so libglx.so.orig
mv libdri.so libdri.so.orig
ld -rpath ${ROOT}/usr/X11R6/$(get_libdir)/modules/extensions -shared -o libglx.so libglx.so.orig libGLcore.so
ld -rpath ${ROOT}/usr/X11R6/$(get_libdir)/modules/extensions -shared -o libdri.so libdri.so.orig libglx.so
fi
print_info
}
pkg_prerm() {
if use ppc64
then
cd ${ROOT}/usr/X11R6/$(get_libdir)/modules/drivers
mv fbdev_drv.so.orig fbdev_drv.so
mv ati_drv.so.orig ati_drv.so
mv nv_drv.so.orig nv_drv.so
cd ${ROOT}/usr/X11R6/$(get_libdir)/modules/extensions
mv libglx.so.orig libglx.so
mv libdri.so.orig libdri.so
fi
}
pkg_postrm() {
# Fix problematic links
if [ -x ${ROOT}/usr/X11R6/bin/Xorg ]
then
ln -snf ../X11R6/bin ${ROOT}/usr/bin/X11
ln -snf ../X11R6/include/X11 ${ROOT}/usr/include/X11
ln -snf ../X11R6/include/DPS ${ROOT}/usr/include/DPS
ln -snf ../X11R6/include/GL ${ROOT}/usr/include/GL
ln -snf ../X11R6/$(get_libdir)/X11 ${ROOT}/usr/$(get_libdir)/X11
fi
}
[/code:1] |
|
IP卡
狗仔卡
发表于 2004-9-10 12:37:11
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
发表于 2004-9-10 12:57:40
打包开始了
