在线请教阿,先谢了!

casiawu

我运行ucosii时,键入target sim时,总出现这样问题
This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf"...
(no debugging symbols found)...
(SkyEye) target sim
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x813cfe0
nic[0] info: state=1, ethmod num=3, mac addr=0:3:6:9:12:15, hostip=10.0.0.1
nic_init_begin
vnetif_init begin, hostip[0][1][2][3] 10.0.0.1
vnetif_init:for hostif fd -1
vnetif_init:for hostif open: 没有那个设备
-----------------------------------------------------------
NOTICE: Now the net simulation function is disable!!!
NOTICE: 1. you should be root at first !!!
NOTICE: 2. if you don't make device node, you should do commands:
NOTICE:      mkdir /dev/net; mknod /dev/net/vnet c 10 201
NOTICE: 3. you should inmod linux kernel net driver vnet.o!!!
NOTICE: Please read README in SkyEye package and try again!!!
-----------------------------------------------------------
[root@wjh ucosii]#
我已经按照readme中安装了驱动了
怎么还老是,急切盼望有人帮助解答一下!

ksh

好像是vnet的驱动没有装上，你可以按提示所说的那样
mkdir /dev/net; mknod /dev/net/vnet c 10 201
并且以root身份
insmod vnet.o