共享在2.6.10内核上装ATI显卡驱动的经验。。。

fryrice · 发表于 2005-1-11 19:21:01

我用的系统是CENTOS 4 BETA。。。。是由FC3的源代码编译过来的，装好以后发现内核怎么配置我的机器都不能够POWEROFF。。。刚好2.6.10内核也出来了，于是就当了新内核源码，把2.69的。CONFIG文件往新内核源代码目录一拷，稍微改了一下就顺利编译通过并OK了，我的电源管理也没有问题了。
今天在网上无聊把TUX RACER这个游戏当下来，发现居然在我的M10显卡上运行龟速,于是手动modprobe上radeon模块，还是没有用！怒！！！闪电去ATI网站上当下了驱动，由于我的X服务器不是XFREE86而是XORG6.8,所以又去GOOGLE搜了几篇文档，原来不影响安装。开始！！！
步骤如下

1.下载最新的驱动包（xfree 4.3 那个）

2.安装驱动包

3.按文档写的进入到/lib/modules/fglrx/build_mod 然后sh make.sh，发现一个警告，我没有理它，继续按文档上写的到/lib/modules/fglrx//lib/modules/fglrx/目录下面sh makeinstall.sh,报错，DMESG了一下发现是pci_find_class这个函数未定义，我晕~~~又上GOOGLE搜了一下，原来是由于新内核把pci_find_class这个函数更名成了pci_get_class,呵呵，这下好办了，反正有源代码，我改！！！！！grep了一下源代码，发现是agpgart_be.c作怪，就把里面用到pci_find_class全部替换成
pci_get_class.这回编译和安装都OK了~~~~

4.fglrxconfig
   那些选项不是很难，按自己的硬件一步步选下去就OK了！
在
5.完成上一步以后会生成/etc/X11/XF86Config-4这么一个文件，把XORG.COnf备份，在这里凭我的经验最好是参照XORG。conf修改一下XF86Config-4里面的一些配置以避免可能产生的硬件不能驱动的问题，然后再把XF86Config-4覆盖掉XORG。CONF。（附上我的修改后可正常启动XF86Config-4，大家参考一下）

6重启X或者系统

如果X启动不了了，一定要仔细看日志XORG初始化的哪步出问题了~~~然后就是凭你的耐心了，一步一步慢慢修改，参照一下原来XORG。CONF的配置。修改完以后，进X体验一下3D的快感吧！！！

经验值+1
体力-2
士气-2

PS：我的ATI显卡驱动没有安装成功，运行3D游戏X就自动退出~原因不明（可能和AGP有关，因为我在WINDOWS里面也无法打开AGP加速，但是不影响玩游戏，3DMARK2001SE 9000分左右）~~~~我哭！！！哪位高人有解决了这样的问题的还请多多指教~~~~~~~~

附1：agpgart_be.c修改地方
+++ agpgart_be.c_ 2004-10-23 19:15:33.000000000 +0200
@@ -718,7 +718,7 @@
   *       AGP devices and collect their data.
   */

- while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+ while ((device = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8,
device)) != NULL) {
pci_read_config_dword(device, 0x04, &scratch);

@@ -839,7 +839,7 @@
   *       command registers.
   */

- while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+ while ((device = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8,
device)) != NULL) {
pci_read_config_dword(device, 0x04, &scratch);

@@ -5068,7 +5068,7 @@
   *       AGP devices and collect their data.
   */

- while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+ while ((device = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8,
device)) != NULL) {
pci_read_config_dword(device, 0x04, &scratch);

@@ -5166,7 +5166,7 @@
   *       command registers.
   */

- while ((device = pci_find_class(PCI_CLASS_DISPLAY_VGA << 8,
+ while ((device = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8,
device)) != NULL) {
pci_read_config_dword(device, 0x04, &scratch);

@@ -6418,7 +6418,7 @@
struct pci_dev *dev = NULL;

   // locate host bridge device
- if ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
+ if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) == NULL)
return -ENODEV;

agp_bridge.dev = dev;
@@ -6935,7 +6935,7 @@
                  &agp_bridge.mode);
return hp_zx1_setup(dev);
}
- dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
+ dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, dev);
} while (dev);
return -ENODEV;

updatedb · 发表于 2005-1-11 19:26:44

Good

ximinjie · 发表于 2005-1-11 21:09:51

多问一句楼主,有windows下那样的ATI控制面板吗?我想TV输出到电视上,又怕linux下没有那样的设置.

fryrice · 发表于 2005-1-12 09:24:35

好象在/USR/SRC下面有控制面板的源代码编译目录，我没有办法测试这个。呵呵

你自己试试吧

不过记得一定选中要双头输出（上面的步骤4里面选中）~~~

sutie · 发表于 2005-1-12 10:39:29

我想TV输出到电视上

我记得国外网站好像有一篇配置TV的文章的说！

看看这篇

http://fedoranews.org/contributors/youssef_makki/tvout/

fryrice · 发表于 2005-1-12 14:13:39

纠正一下～～～～

不好意思，我装上驱动了，驱动是支持的我本本显卡芯片的

但是无法驱动我的3D。。

AGPGART这个模块挂不上。我一进3D游戏或者运行测试Xorg就自动注销。。

可能是因为我显卡是PCI接口的原因（WINDOWS中也无法打开AGP支持）

～～～～继续努力中。。。。。

fryrice · 发表于 2005-1-14 19:13:46

附上我的XORG。CONF,大家参考一下
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
Group 0
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load       "dbe"    # Double buffer extension
# Load  "extmod"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection  "extmod"
#    Option "omit xfree86-dga"
EndSubSection
# Load  "fbdevhw"

# This loads the Type1 and FreeType font modules
Load       "type1"
Load       "freetype"

# This loads the GLX module
Load       "glx" # libglx.a
# Load       "record"
# Load       "xtt"
Load       "dri" # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath       "unix/:7100"
   FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

# The module search path.  The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard0"
   Driver          "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds"    "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout"  "de"
# or:
# Option "XkbLayout"  "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout"  "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbModel" "pc105"
Option "XkbLayout" "us"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option       "Emulate3Buttons" "yes"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier  "Mouse2"
# Driver    "mouse"
# Option    "Protocol"    "MouseMan"
# Option    "Device"       "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver    "magellan"
# Option    "Device"       "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver    "spaceorb"
# Option    "Device"       "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver    "microtouch"
# Option    "Device"       "/dev/ttyS0"
# Option    "MinX"          "1412"
# Option    "MaxX"          "15184"
# Option    "MinY"          "15372"
# Option    "MaxY"          "1230"
# Option    "ScreenNumber" "0"
# Option    "ReportingMode"  "Scaled"
# Option    "ButtonNumber" "1"
# Option    "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver    "elo2300"
# Option    "Device"       "/dev/ttyS0"
# Option    "MinX"          "231"
# Option    "MaxX"          "3868"
# Option    "MinY"          "3858"
# Option    "MaxY"          "272"
# Option    "ScreenNumber" "0"
# Option    "ReportingMode"  "Scaled"
# Option    "ButtonThreshold" "17"
# Option    "ButtonNumber" "1"
# Option    "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier  "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1400x1050"
HorizSync 31.5 - 90.0
VertRefresh  59.0 - 75.0
Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
# Identifier  "Standard VGA"
# VendorName  "Unknown"
# BoardName "Unknown"
Identifier  "Videocard0"
# Driver    "radeon"
VendorName  "Videocard vendor"
BoardName "ATI Radeon Mobility 9600 M10"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver    "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

# BusID    "PCI:0:10:0"

# VideoRam 256

# Clocks    25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
Identifier                         "ATI Graphics Adapter"
Driver                            "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
#Option                            "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel"                "no"
Option "no_dri"                   "no"
# === misc DRI settings ===
Option "mtrr"                      "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup"             "0x00000000"
Option "MonitorLayout"             "AUTO, AUTO"
Option "IgnoreEDID"                "off"
Option "HSync2"                   "unspecified"
Option "VRefresh2"                "unspecified"
Option "ScreenOverlap"             "0"
# === TV-out Management ===
Option "NoTV"                      "yes"
Option "TVStandard"                "NTSC-M"
Option "TVHSizeAdj"                "0"
Option "TVVSizeAdj"                "0"
Option "TVHPosAdj"                "0"
Option "TVVPosAdj"                "0"
Option "TVHStartAdj"             "0"
Option "TVColorAdj"                "0"
Option "GammaCorrectionI"          "0x00000000"
Option "GammaCorrectionII"       "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities"             "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay"             "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#    will be disabled automatically
Option "OpenGLOverlay"             "off"
# === Center Mode (Laptops only) ===
Option "CenterMode"                "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals"       "off"
# === QBS Management ===
Option "Stereo"                   "off"
Option "StereoSyncEnable"          "1"
# === FSAA Management ===
Option "FSAAEnable"                "no"
Option "FSAAScale"                "1"
Option "FSAADisableGamma"          "no"
Option "FSAACustomizeMSPos"       "no"
Option "FSAAMSPosX0"             "0.000000"
Option "FSAAMSPosY0"             "0.000000"
Option "FSAAMSPosX1"             "0.000000"
Option "FSAAMSPosY1"             "0.000000"
Option "FSAAMSPosX2"             "0.000000"
Option "FSAAMSPosY2"             "0.000000"
Option "FSAAMSPosX3"             "0.000000"
Option "FSAAMSPosY3"             "0.000000"
Option "FSAAMSPosX4"             "0.000000"
Option "FSAAMSPosY4"             "0.000000"
Option "FSAAMSPosX5"             "0.000000"
Option "FSAAMSPosY5"             "0.000000"
# === Misc Options ===
Option "UseFastTLS"                "2"
Option "BlockSignalsOnLock"       "on"
Option "UseInternalAGPGART"       "no"
Option "ForceGenericCPU"          "no"
BusID "PCI:1:0:0" # vendor=1002, device=4e50
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier  "Screen0"
Device    "ATI Graphics Adapter"
Monitor    "Monitor0"
DefaultDepth 24
#Option "backingstore"


SubSection "Display"
Viewport 0 0
Depth    24
Modes "1400x1050" "1280x1024"  "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#"1400x1050" "1280x1024" "1280x960" "1152x864"

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

Screen    0  "Screen0" 0 0

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"

EndSection

### EOF ###

sutie · 发表于 2005-1-14 22:11:24

good boy

		自动登录	找回密码
密码			注册