startx起动不了图形界面系统?

zhaojuntao2005 · 发表于 2005-1-13 20:05:29

我的机器装的是redhat 9 本来用得好好的, startx命令也很正常,但是前几天我用这个命令起动不了X系统了,不知道怎么回事, 我现在进X系统是通过gdm命令进入的! 个位大姐大姐夫们给小弟科普一下好吗?小弟先谢了!!!

qqwangyong · 发表于 2005-1-13 20:20:34

把/tmp分区容量增大（500M左右）即可解决（经验之谈）。

zhaojuntao2005 · 发表于 2005-1-14 09:14:06

谢谢，谢谢

zhaojuntao2005 · 发表于 2005-1-14 10:31:04

怎么增大/tmp的容量?谢谢,谢谢!

bart · 发表于 2005-1-14 10:46:54

出的什么错？请说明一下。
qqwangyong你怎么就知道一定是/tmp容量不足？

zhaojuntao2005 · 发表于 2005-1-14 14:38:58

以前运行 startx命令的时候是，黑屏中间出个小差号，然后等待启动x，x过大约5秒钟就启动起来了，前几天我在shell下运行startx命令后，然后屏幕就只是闪一下，就退出到shell命令行里了，根本启动不起来x，最后显示这一条（waiting for x server to shut down,以前能用的时候注销图形界面，返回shell也是显示这一行的，只是现在直接显示了！）

bart · 发表于 2005-1-14 17:15:26

把/var/log/Xorg.0.log (XFree86.0.log) 贴出来看看

zhaojuntao2005 · 发表于 2005-1-14 17:56:04

好的  我的机器上是/var/log/XFree86.0.log文件,内容如下:
  [2] -1  0    0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
      [3] -1  0    0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
      [4] -1  0    0xdfff7000 - 0xdfff7fff (0x1000) MX[B]
      [5] -1  0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
      [6] -1  0    0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
      [7] -1  0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
      [8] -1  0    0x0000d000 - 0x0000d0ff (0x100) IX[B]
      [9] -1  0    0x0000d800 - 0x0000d8ff (0x100) IX[B]
      [10] -1 0    0x0000d400 - 0x0000d4ff (0x100) IX[B]
      [11] -1 0    0x0000ff00 - 0x0000ff0f (0x10) IX[B]
      [12] -1 0    0x0000bc00 - 0x0000bc7f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
      [0] -1  0    0xdfff6f00 - 0xdfff6fff (0x100) MX[B]
      [1] -1  0    0xdfffe000 - 0xdfffefff (0x1000) MX[B]
      [2] -1  0    0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
      [3] -1  0    0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
      [4] -1  0    0xdfff7000 - 0xdfff7fff (0x1000) MX[B]
      [5] -1  0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
      [6] -1  0    0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
      [7] -1  0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
      [8] -1  0    0x0000d000 - 0x0000d0ff (0x100) IX[B]
      [9] -1  0    0x0000d800 - 0x0000d8ff (0x100) IX[B]
      [10] -1 0    0x0000d400 - 0x0000d4ff (0x100) IX[B]
"XFree86.0.log" [已转换] 624L, 31262C                      120,1       17%

以下是/etc/X11/XF86config的内容:
# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
      Identifier    "Default Layout"
      Screen    0  "Screen0" 0 0
      InputDevice "Mouse0" "CorePointer"
      InputDevice "Keyboard0" "CoreKeyboard"
      InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
      RgbPath    "/usr/X11R6/lib/X11/rgb"
      FontPath    "unix/:7100"
EndSection

Section "Module"
"XF86Config" [已转换] 129L, 3327C                            1,1       顶端

zhaojuntao2005 · 发表于 2005-1-14 17:57:48

大姐,大姐夫多多指教,老弟跪谢了!

zhaojuntao2005 · 发表于 2005-1-14 18:02:10

XFree86.0.log的内容再重新贴一遍,刚才没贴全:
   [4] -1  0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
      [5] -1  0    0x0000ffff - 0x0000ffff (0x1) IX[B]
      [6] -1  0    0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
      [0] -1  0    0xdfff6f00 - 0xdfff6fff (0x100) MX[B]
      [1] -1  0    0xdfffe000 - 0xdfffefff (0x1000) MX[B]
      [2] -1  0    0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
      [3] -1  0    0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
      [4] -1  0    0xdfff7000 - 0xdfff7fff (0x1000) MX[B]
      [5] -1  0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
      [6] -1  0    0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
      [7] -1  0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
      [8] -1  0    0x0000d000 - 0x0000d0ff (0x100) IX[B]
      [9] -1  0    0x0000d800 - 0x0000d8ff (0x100) IX[B]
      [10] -1 0    0x0000d400 - 0x0000d4ff (0x100) IX[B]
      [11] -1 0    0x0000ff00 - 0x0000ff0f (0x10) IX[B]
      [12] -1 0    0x0000bc00 - 0x0000bc7f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
      [0] -1  0    0xdfff6f00 - 0xdfff6fff (0x100) MX[B]
      [1] -1  0    0xdfffe000 - 0xdfffefff (0x1000) MX[B]
      [2] -1  0    0xdfffd000 - 0xdfffdfff (0x1000) MX[B]
      [3] -1  0    0xdfffc000 - 0xdfffcfff (0x1000) MX[B]
      [4] -1  0    0xdfff7000 - 0xdfff7fff (0x1000) MX[B]
      [5] -1  0    0xe0000000 - 0xdfffffff (0x0) MX[B]O
      [6] -1  0    0xdfee0000 - 0xdfefffff (0x20000) MX[B](B)
      [7] -1  0    0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
      [8] -1  0    0x0000d000 - 0x0000d0ff (0x100) IX[B]
      [9] -1  0    0x0000d800 - 0x0000d8ff (0x100) IX[B]
      [10] -1 0    0x0000d400 - 0x0000d4ff (0x100) IX[B]
      [11] -1 0    0x0000ff00 - 0x0000ff0f (0x10) IX[B]
      [12] -1 0    0x0000bc00 - 0x0000bc7f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
      [0] -1  0    0xffe00000 - 0xffffffff (0x200000) MX[B](B)
      [1] -1  0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
      [2] -1  0    0x000f0000 - 0x000fffff (0x10000) MX[B]
      [3] -1  0    0x000c0000 - 0x000effff (0x30000) MX[B]
      [4] -1  0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
      [5] -1  0    0x0000ffff - 0x0000ffff (0x1) IX[B]
      [6] -1  0    0x00000000 - 0x000000ff (0x100) IX[B]
                                                                                                                           120,1       17%

zhaojuntao2005 · 发表于 2005-1-14 18:07:45

bart哥哥能帮小弟解释一下其中的意思吗?比如说(II) Active PCI resource ranges:什么意思,这个跟PCI有什么关系呀?

zhaojuntao2005 · 发表于 2005-1-14 19:01:39

bart · 发表于 2005-1-14 22:03:27

[quote:c7383f753b="zhaojuntao2005"]bart哥哥能帮小弟解释一下其中的意思吗?比如说(II) Active PCI resource ranges:什么意思,这个跟PCI有什么关系呀?[/quote]

X 在启动过程中会扫描PCI总线寻找显示卡等设备，所以就有这些信息。你的log不全，关键是最后那些行，贴出来看看。

cobranail · 发表于 2005-1-15 01:36:17

把log'里带(EE)的部分贴出来，大概在后面

zhaojuntao2005 · 发表于 2005-1-15 09:51:12

好我马上贴

		自动登录	找回密码
密码			注册