帮忙：无法进入X?

NoHair

Total Memory: 123 64Kb banks (7M)
(EE) VESA(0): No matching modes
(II) UnloadModule: "vesa"
(II) UnloadModule: "ddc"
(II) UnloadModule: "int10"
(II) UnloadModule: "vbe"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

gongcon

What display device are you using? Please post your XF86Config-4 file.

linky_fan

贴一下你的xf86config-4出来

slashseed

用的 nv ti 4800se

这是 config :
# XF86Config-4 (XFree86 X Window System server configuration file)

Section "Files"
        FontPath        "unix/:7100"                        # local font server
        # if the local font server has problems, we can fall back on these
        FontPath        "/usr/lib/X11/fonts/misc"
        FontPath        "/usr/lib/X11/fonts/cyrillic"
        FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/Type1"
        FontPath        "/usr/lib/X11/fonts/CID"
        FontPath        "/usr/lib/X11/fonts/Speedo"
        FontPath        "/usr/lib/X11/fonts/100dpi"
        FontPath        "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
        Load        "GLcore"
        Load        "bitmap"
        Load        "dbe"
        Load        "ddc"
        Load        "dri"
        Load        "extmod"
        Load        "freetype"
        Load        "glx"
        Load        "int10"
        Load        "record"
        Load        "speedo"
        Load        "type1"
        Load        "vbe"
EndSection

Section "InputDevice"
        Identifier  "keyboard0"
        Driver      "keyboard"
        Option            "XkbRules" "xfree86"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "mouse0"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "yes"
EndSection

Section "Device"
        Identifier        "nVidia Corporation NV28 [GeForce4 Ti 4800 SE]"
        Driver                "nv"
        VideoRam        65536
EndSection

Section "Monitor"
        Identifier        "SAMSUNG SyncMaster 765Mb"
        VendorName   "Samsung Corporation"
        ModelName    "Samsung SyncMaster 765(M)b"
        DisplaySize  312        234
        HorizSync    30.0 - 85.0
        VertRefresh  50.0 - 160.0
        Option            "dpms"
EndSection

Section "Screen"
        Identifier        "Default Screen"
        Device                "nVidia Corporation NV28 [GeForce4 Ti 4800 SE]"
        Monitor                "SAMSUNG SyncMaster 765Mb"
        DefaultDepth        24
        SubSection "Display"
                Depth                1
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                4
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                8
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                15
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                16
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                24
                Modes                "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier        "Default Layout"
        Screen                "Default Screen"
        InputDevice        "keyboard0"
        InputDevice        "mouse0"
EndSection

Section "DRI"
        Mode        0666
EndSection




这是 log :

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-10 20041215174925 [email protected])
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.26 i686 [ELF]
Build Date: 15 December 2004

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way.  Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
       XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
  plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.6.8-1-686-smp (joshk@trollwife) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Thu Nov 25 04:55:00 UTC 2004
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jan 18 01:21:36 2005
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)

(**) |   |-->Monitor "SAMSUNG SyncMaster 765Mb"
(**) |   |-->Device "nVidia Corporation NV28 [GeForce4 Ti 4800 SE]"
(**) |-->Input Device "keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "mouse0"
(EE) No core pointer device specified
(EE) Unable to determine the screen layout
(EE) Error from xf86HandleConfigFile()

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].

NoHair

我用的是intel 915板载的显卡：

### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
        FontPath        "unix/:7100"                        # local font server
        # if the local font server has problems, we can fall back on these
        FontPath        "/usr/lib/X11/fonts/misc"
        FontPath        "/usr/lib/X11/fonts/cyrillic"
        FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/Type1"
        FontPath        "/usr/lib/X11/fonts/Speedo"
        FontPath        "/usr/lib/X11/fonts/100dpi"
        FontPath        "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
        Load        "GLcore"
        Load        "bitmap"
        Load        "dbe"
        Load        "ddc"
        Load        "dri"
        Load        "extmod"
        Load        "freetype"
        Load        "glx"
        Load        "int10"
        Load        "pex5"
        Load        "record"
        Load        "speedo"
        Load        "type1"
        Load        "vbe"
        Load        "xie"
EndSection

Section "InputDevice"
        Identifier        "Generic Keyboard"
        Driver                "keyboard"
        Option                "CoreKeyboard"
        Option                "XkbRules"        "xfree86"
        Option                "XkbModel"        "pc104"
        Option                "XkbLayout"        "us"
EndSection

Section "InputDevice"
        Identifier        "Configured Mouse"
        Driver                "mouse"
        Option                "CorePointer"
        Option                "Device"                "/dev/psaux"
        Option                "Protocol"                "ImPS/2"
        Option                "Emulate3Buttons"        "true"
        Option                "ZAxisMapping"                "4 5"
EndSection

Section "InputDevice"
        Identifier        "Generic Mouse"
        Driver                "mouse"
        Option                "SendCoreEvents"        "true"
        Option                "Device"                "/dev/input/mice"
        Option                "Protocol"                "ImPS/2"
        Option                "Emulate3Buttons"        "true"
        Option                "ZAxisMapping"                "4 5"
EndSection

Section "Device"
        Identifier        "Generic Video Card"
        Driver                "vesa"
#        Option                "UseFBDev"                "true"
EndSection

Section "Monitor"
        Identifier        "Generic Monitor"
        HorizSync        28-50
        VertRefresh        43-75
        Option                "DPMS"
EndSection

Section "Screen"
        Identifier        "Default Screen"
        Device                "Generic Video Card"
        Monitor                "Generic Monitor"
        DefaultDepth        24
        SubSection "Display"
                Depth                1
                Modes                "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                4
                Modes                "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                8
                Modes                "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                15
                Modes                "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                16
                Modes                "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth                24
                Modes                "800x600" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier        "Default Layout"
        Screen                "Default Screen"
        InputDevice        "Generic Keyboard"
        InputDevice        "Configured Mouse"
        InputDevice        "Generic Mouse"
EndSection

Section "DRI"
        Mode        0666
EndSection

### END DEBCONF SECTION

suncrow

你不觉得眼睛很不舒服吗？？？       

linky_fan

slashseed,

Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe

这里有几个模块是不需要的。

Section "Device"
Identifier "nVidia Corporation NV28 [GeForce4 Ti 4800 SE]"
Driver "nv"
VideoRam 65536
EndSection

这里把红色的部分改成“nvidia”，可以去看看官方的安装说明，里面说的很明白的。

gongcon

You may use vesa driver although I suggest you use the official driver of Nvidia.
try to disable
     Load "GLcore"
     Load dri"
     Option "DPMS"