7.3下如何通过配置文件修改分辨率呢?

vovi · 发表于 2005-3-3 13:47:54

求助.1024的想改成800

sutie · 发表于 2005-3-3 13:52:26

把你/etc/X11下面的 Xfree86-4（好象是这个名字）贴上来！

vovi · 发表于 2005-3-3 14:25:17

# File generated by anaconda.

Section "ServerLayout"
      Identifier    "Anaconda Configured"
      Screen    0  "Screen0" 0 0
      InputDevice "Mouse0" "CorePointer"
      InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:7100"

EndSection

Section "Module"
      Load  "GLcore"
      Load  "dbe"
      Load  "extmod"
Load "fbdevhw"
Load "dri"
      Load  "glx"
      Load  "record"
      Load  "freetype"
      Load  "type1"
EndSection

Section "InputDevice"
      Identifier  "Keyboard0"
      Driver    "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection

Section "InputDevice"
      Identifier  "Mouse0"
      Driver    "mouse"
      Option    "Protocol" "PS/2"
      Option    "Device" "/dev/psaux"
      Option    "ZAxisMapping" "4 5"
      Option    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
      Identifier "Monitor0"
      VendorName "Monitor Vendor"
      ModelName "Monitor Model"
      HorizSync 31.5-48.5
      VertRefresh 50-70
      Option "dpms"

      # -- 1400x1050 --
      # 1400x1050 @ 60Hz, 65.8 kHz hsync
      Modeline "1400x1050"  129 1400 1464 1656 1960
                           1050 1051 1054 1100 +HSync +VSync

      # 1400x1050 @ 70Hz, 76.8 kHz hsync
      Modeline "1400x1050"  151 1400 1464 1656 1960
                           1050 1051 1054 1100 +HSync +VSync

      # 1400x1050 @ 75Hz, 82.3 kHz hsync
      Modeline "1400x1050"  162 1400 1464 1656 1960
                           1050 1051 1054 1100 +HSync +VSync

      # 1400x1050 @ 85Hz, 93.2 kHz hsync
      Modeline "1400x1050"  184 1400 1464 1656 1960
                           1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Device"
# no known options
Identifier "VESA driver (generic)"
      Driver    "vesa"
      VendorName "VESA driver (generic)"
      BoardName    "VESA driver (generic)"

      #BusID
EndSection

Section "Screen"
Identifier "Screen0"
      Device    "VESA driver (generic)"
      Monitor    "Monitor0"
DefaultDepth 16

Subsection "Display"
        Depth    16
            Modes    "1024x768" "800x600" "640x480"
EndSubsection

EndSection

Section "DRI"
Mode 0666
EndSection

vovi · 发表于 2005-3-3 14:27:24

是不是修改这个地方的顺序.
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection

刷新率用跟着改吧?
我不能运行redhat-config-XFree86
是什么没有安装?

ccyou · 发表于 2005-3-3 14:55:45

偶也关心这个问题
但我更想知道字符界面下能否改刷新率?

sutie · 发表于 2005-3-3 15:10:03

[quote:b37ecb0402="vovi"]# File generated by anaconda.

Section "ServerLayout"
      Identifier    "Anaconda Configured"
      Screen    0  "Screen0" 0 0
      InputDevice "Mouse0" "CorePointer"
      InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:7100"

EndSection

Section "Module"
      Load  "GLcore"
      Load  "dbe"
      Load  "extmod"
Load "fbdevhw"
Load "dri"
      Load  "glx"
      Load  "record"
      Load  "freetype"
      Load  "type1"
EndSection

Section "InputDevice"
      Identifier  "Keyboard0"
      Driver    "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection

Section "InputDevice"
      Identifier  "Mouse0"
      Driver    "mouse"
      Option    "Protocol" "PS/2"
      Option    "Device" "/dev/psaux"
      Option    "ZAxisMapping" "4 5"
      Option    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
      Identifier "Monitor0"
      VendorName "Monitor Vendor"
      ModelName "Monitor Model"
      HorizSync 31.5-48.5
      VertRefresh 50-70
      Option "dpms"

      # -- 1400x1050 --
      # 1400x1050 @ 60Hz, 65.8 kHz hsync
      Modeline "1400x1050"  129 1400 1464 1656 1960
                           1050 1051 1054 1100 +HSync +VSync

      # 1400x1050 @ 70Hz, 76.8 kHz hsync
      Modeline "1400x1050"  151 1400 1464 1656 1960
                           1050 1051 1054 1100 +HSync +VSync

      # 1400x1050 @ 75Hz, 82.3 kHz hsync
      Modeline "1400x1050"  162 1400 1464 1656 1960
                           1050 1051 1054 1100 +HSync +VSync

      # 1400x1050 @ 85Hz, 93.2 kHz hsync
      Modeline "1400x1050"  184 1400 1464 1656 1960
                           1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Device"
# no known options
Identifier "VESA driver (generic)"
      Driver    "vesa"
      VendorName "VESA driver (generic)"
      BoardName    "VESA driver (generic)"

      #BusID
EndSection

Section "Screen"
Identifier "Screen0"
      Device    "VESA driver (generic)"
      Monitor    "Monitor0"
DefaultDepth 16

Subsection "Display"
        Depth    16
            Modes    "800x600" "640x480"
EndSubsection

EndSection

Section "DRI"
Mode 0666
EndSection[/quote]

试试！

sutie · 发表于 2005-3-3 15:11:10

[quote:f142076e29="ccyou"]偶也关心这个问题
但我更想知道字符界面下能否改刷新率?[/quote]

去shell那里找，有人问过了！

sutie · 发表于 2005-3-3 15:14:38

要改刷新率的话，需要你的显示器说明书上面标明的行频和场频，也叫水平刷新率和垂直刷新率！

如果没有说明书的话刷新率你只能像现在这样凑合了！

vovi · 发表于 2005-3-4 12:09:09

谢谢sutie

		自动登录	找回密码
密码			注册