发贴庆祝FC4TEST3安装成功！

arlly

RH9用了两年了，忽然想更新一下系统了。

FC4出TEST3了，应该可以安装用了吧。凭此心理下载了4个ISO映象，地址可以从以下链接得到：http://fedora.redhat.com/download/mirrors.html#ASIA
我下载时选用了三个日本镜象点和一个台湾镜象点，同时下载4个ISO文件，呵呵：）不过要注意了，不要开太多的线程啊。不然路途总是中断，说你连接太多，每个站点我只开了两个线程下载。三小时搞定！！



硬盘安装方法和FC3一样。公社有相应的方法：http://www.linuxfans.org/nuke/modules.php?name=Site_Downloads&op=geninfo&did=3054

首次启动图：

arlly

FC4 NVIDIA显卡驱动安装问答：（come form fc unite)

--------------------------------------------------------------------------------

Here's how to install the nVidia drivers if the RPM doesn't work (or if you don't want to use the RPM):

Get the lastest linux drivers.
Now print this out, or write it down, because we're going to close X, the graphical part of Linux.
Open a Terminal.
Become root:
su -

Shut down X:
telinit 3

Now, you will have a "Login:" prompt. Log in as root and go to the directory where you downloaded the nVidia drivers.
Type:
sh NVIDIA-Linux-x86-1.0-6106-pkg*.run

Type:
cp -a /dev/nvidia* /etc/udev/devices/

Type:
chown root: /etc/udev/devices/nvidia*

Follow nVidia's instructions to set up the driver. (Read the "EDITING YOUR X CONFIG FILE" section.)
Now, we need to remove some conflicting files:
rpm -e --nodeps xorg-x11-Mesa-libGL

NOTE: If you update any "xorg-x11" package with up2date or yum, you will have to do the above command again.

NOTE: Some users report that removing this package is not necessary for them.

Type:
modprobe nvidia

You can now restart X by typing:
telinit 5

.
NOTE: You must re-do these steps every time you install a new kernel with yum or up2date.









搜索了好久没有找到合适的NVIDIA驱动，可能是内核版本太高吧。安装宣布破产，不知道大侠们有什么好办法？？





FC4TEST3中文美化结果：大家评评！

月下刀客

good   

arlly

能够在GCC4下编译的软件这样少啊。以前常用的工具都不能编译了，连RPM包也装不成！！看样子还是使用主流的系统比较好呀。想尝“鲜”的例外。

还好fedora提供了在线升级，当然还有各种预编译好的包下载。给出以下链接大家自己找吧。


http://livna.cat.pdx.edu/fedora/
http://wftp.tu-chemnitz.de/pub/linux/livna/fedora/