jffs2不能写的问题

kuen

謝謝各位大俠
終於解決了問題


原來是因為小弟忘記了在內核啟動「JFFS2 support for NAND chips」

現在可以讀寫了

haosf

请问 kuen，我现在在44B0板子的NAND FLASH 上做JFFS2，能否指点一下，谢谢！！msn:[email protected]

nigel_d

你的驱动里map文件里有没加写掩码

gaoghp

我也遇到这个问题,建目录时提示:No space left on device
能帮我看一下不?
错误信息:

VIVI version 0.1.4 ([email protected]) (gcc version 2.95.3 20010315 (release)) #0.1.4 鍥?1鏈?12 22:15:03 HKT 2006
Evacuating 1MB of Flash to DRAM at 0x33F00000
MMU table base address = 0x33DFC000
Map flash virtual section to DRAM at 0x33F00000
Succeed memory mapping.
S3C2410 flash: probing 16-bit flash bus
S3C2410 Nor flash: Probing for AMD compatible flash...
S3C2410 Nor flash: Found 1 x 4MiB SPATION S29AL032D at 0x0
Could not found stored vivi parameters. Use default vivi parameters.
Press Return to start the LINUX now, any other key for vivi
Copy linux kernel from 0x00030000 to 0x30008000, size = 0x00150000 ... done
zImage magic = 0x016f2818
Setup linux parameters at 0x30000100
linux command line is: "noinitrd root=/dev/mtdblock/3 init=/linuxrc console=tty0 console=ttyS0"
MACH_TYPE = 193
NOW, Booting Linux......
Uncompressing Linux...................................................... done, booting the kernel.
Linux version 2.4.18-rmk7-pxa1 ([email protected]) (gcc version 2.95.3 20010315 (release)) #11 涓