|
|
楼主 |
发表于 2005-8-4 19:19:04
|
显示全部楼层
to:midx
我按照你这个帖子的办法打了补丁，编辑了ebiuld文件，重新emerge xorg-x11,结果还是老样子，
http://www.linuxsir.org/bbs/showthread.php?t=205211&highlight=xorg
贴一下我的xorg-x11-6.8.2-r2.ebuild
# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-x11/xorg-x11-6.8.2-r2.ebuild,v 1.51 2005/07/29 23:52:04 spyderous Exp $
# Set TDFX_RISKY to "yes" to get 16-bit, 1024x768 or higher on low-memory
# voodoo3 cards.
# Libraries which are now supplied in shared form that were not in the past
# include: libFS.so, libGLw.so, libI810XvMC.so, libXRes.so, libXfontcache.so,
# libXinerama.so, libXss.so, libXvMC.so, libXxf86rush.so, libfontenc.so,
# libxkbfile.so, libxkbui.so
# TODO
# 1 June 2005 <[email protected]>
# TARGET: none
# Consider building shared libraries only, when both are provided
# Combine find loops for "Creating fonts.scale files," "Generating
# fonts.dir files and "Generating Xft cache"
# <Mr_Bones_> the loop in pkg_postinst for removing Compose can probably
# be one line of bash expansion like rm -f ${ROOT}/usr/$(get_libdir)/
# X11/locale/{ja*|ko*|zh*}/Compose
# Clean up migration function
# - loop through lib* instead of repetition
# Fix direction of lib -> libdir symlink
# Generalize any functions that make sense to generalize (i.e., anything
# that might realistically see use elsewhere, or repetitively here)
inherit eutils flag-o-matic toolchain-funcs x11 linux-info multilib
# Make sure Portage does _NOT_ strip symbols. We will do it later and make sure
# that only we only strip stuff that are safe to strip ...
RESTRICT="nostrip"
# IUSE="gatos" disabled because gatos is broken on ~4.4 now (31 Jan 2004)
IUSE="3dfx 3dnow bitmap-fonts cjk debug dlloader dmx doc font-server
insecure-drivers ipv6 minimal mmx nls nocxx opengl pam sdk sse static
truetype-fonts type1-fonts uclibc xprint xv"
# IUSE_INPUT_DEVICES="synaptics wacom"
FILES_VER="0.7"
PATCH_VER="0.1.9"
XCUR_VER="0.3.1"
XFSFT_ENC_VER="0.1"
S=${WORKDIR}/xc
HOMEPAGE="http://xorg.freedesktop.org/"
# Misc patches we may need to fetch ..
X_PATCHES="http://dev.gentoo.org/~spyderous/${PN}/patchsets/${PV}/${P}-patches-${PATCH_VER}.tar.bz2
http://dev.gentoo.org/~cyfred/distfiles/${P}-patches-${PATCH_VER}.tar.bz2
mirror://gentoo/${P}-patches-${PATCH_VER}.tar.bz2"
GENTOO_FILES="http://dev.gentoo.org/~spyderous/${PN}/patchsets/${PV}/${P}-files-${FILES_VER}.tar.bz2
http://dev.gentoo.org/~cyfred/distfiles/${P}-files-${FILES_VER}.tar.bz2
mirror://gentoo/${P}-files-${FILES_VER}.tar.bz2"
SRC_URI="!minimal? ( mirror://gentoo/eurofonts-X11.tar.bz2 )
font-server? ( http://dev.gentoo.org/~cyfred/xorg/${PN}/patchsets/${PV}/xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 )
!minimal? ( mirror://gentoo/gentoo-cursors-tad-${XCUR_VER}.tar.bz2 )
nls? ( mirror://gentoo/gemini-koi8-u.tar.bz2 )
${GENTOO_FILES}
${X_PATCHES}
http://xorg.freedesktop.org/X11R${PV}/src-single/X11R${PV}-src.tar.bz2"
# http://xorg.freedesktop.org/X11R${PV}/src/X11R${PV}-src1.tar.gz
# http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src2.tar.gz
# http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src3.tar.gz
# http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src4.tar.gz
# http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src5.tar.gz
# doc? (
# http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src6.tar.gz
# http://xorg.freedesktop.org/X11R${PV}/src//X11R${PV}-src7.tar.gz
# )"
LICENSE="Adobe-X CID DEC DEC-2 IBM-X NVIDIA-X NetBSD SGI UCB-LBL XC-2
bigelow-holmes-urw-gmbh-luxi christopher-g-demetriou national-semiconductor
nokia tektronix the-open-group todd-c-miller x-truetype xfree86-1.0
MIT SGI-B BSD || ( FTL GPL-2 )"
SLOT="0"
KEYWORDS="alpha amd64 arm hppa ia64 mips ppc ppc64 sparc x86"
DEPEND=">=sys-libs/ncurses-5.1
>=sys-libs/zlib-1.1.3-r2
>=sys-devel/flex-2.5.4a-r5
>=dev-libs/expat-1.95.3
>=media-libs/freetype-2.1.8
>=media-libs/fontconfig-2.1-r1
opengl? ( >=x11-base/opengl-update-2.2.0 )
!nocxx? ( >=x11-misc/ttmkfdir-3.0.9-r2 )
>=sys-apps/sed-4
sys-apps/util-linux
dev-lang/perl
media-libs/libpng
!<=app-emulation/emul-linux-x86-xlibs-1.2-r3
!virtual/xft
!virtual/x11"
# x11-libs/xft -- blocked because of interference with xorg's
RDEPEND="
>=sys-libs/zlib-1.1.3-r2
>=sys-devel/flex-2.5.4a-r5
>=dev-libs/expat-1.95.3
>=media-libs/freetype-2.1.8
>=media-libs/fontconfig-2.1-r1
opengl? ( >=x11-base/opengl-update-2.2.0 )
!nocxx? ( >=x11-misc/ttmkfdir-3.0.9-r2 )
media-libs/libpng
>=sys-libs/ncurses-5.1
!<=app-emulation/emul-linux-x86-xlibs-1.2-r3
!virtual/xft
!virtual/x11"
PDEPEND="x86? (
3dfx? ( >=media-libs/glide-v3-3.10 )
input_devices_synaptics? ( x11-misc/synaptics )
input_devices_wacom? ( x11-misc/linuxwacom )
)
alpha? (
3dfx? ( >=media-libs/glide-v3-3.10 )
)
!uclibc? ( x11-terms/xterm )"
PROVIDE="virtual/x11
opengl? virtual/opengl
opengl? virtual/glu
virtual/xft"
DESCRIPTION="An X11 implementation maintained by the X.Org Foundation"
pkg_setup() {
FILES_DIR="${WORKDIR}/files"
PATCHDIR="${WORKDIR}/patch"
EXCLUDED="${PATCHDIR}/excluded"
# Set up CFLAG-related things
cflag_setup
# See bug #35468, circular pam-X11 dep
check_pam
# Look for invalid/dangerous USE flags and combinations
check_use_combos
setup_multilib
# xfs user
if use font-server; then
enewgroup xfs 33
enewuser xfs 33 /bin/false /etc/X11/fs xfs
fi
}
src_unpack() {
unpack_all
patch_setup
do_patch
host_def_setup
use_specific_hacks
}
src_compile() {
build
}
src_install() {
install_everything
backward_compat_install
fix_permissions
# We zap our CFLAGS in the host.def file, as hardcoded CFLAGS can
# mess up other things that use xmkmf
zap_host_def_cflags
# EURO support
if ! use minimal; then
add_euro_support
fi
setup_standard_symlinks
if use opengl; then
fix_opengl_symlinks
fi
libtool_archive_install
compose_files_install
if use font-server; then
encode_xfsft_files
fi
if use nls; then
koi8_fonts_install
fi
etc_files_install
if use opengl; then
dynamic_libgl_install
fi
fix_libtool_libdir_paths "$(find ${D} -name *.la)"
cursor_install
strip_execs
if use minimal; then
minimal_install
fi
# TEMPORARY hack: should be patched in, if it's not already
# For Battoussai's gatos stuffs:
if use sdk; then
insinto /usr/$(get_libdir)/Server/include
doins ${S}/extras/drm/shared/drm.h
fi
xprint_install
config_files_install
}
pkg_preinst() {
# Do migration before anything else, so we do all the rest inside the
# symlink
# Get rid of "standard" symlinks
# We can't overwrite symlink with directory w/ $(mv -f)
[ -L ${ROOT}usr/$(get_libdir)/X11 ] \
&& rm ${ROOT}usr/$(get_libdir)/X11
[ -L ${ROOT}usr/include/X11 ] \
&& rm ${ROOT}usr/include/X11
[ -L ${ROOT}usr/include/GL ] \
&& rm ${ROOT}usr/include/GL
[ -L ${ROOT}usr/bin/X11 ] \
&& rm ${ROOT}usr/bin/X11
# Get rid of some apparent artifacts of migration
[ -L ${ROOT}usr/include/GL/GL ] \
&& rm ${ROOT}usr/include/GL/GL
[ -L ${ROOT}usr/include/X11/X11 ] \
&& rm ${ROOT}usr/include/X11/X11
[ -d ${ROOT}usr/share/fonts/fonts ] \
&& rm -rf ${ROOT}usr/share/fonts/fonts
# No need to do this, if it's already been done
# Also, it'll overwrite a ton of stuff because it won't realize /usr/X11R6
# is a symlink.
if [ ! -L "/usr/X11R6" ]; then
# Migrate stuff in /usr/X11R6 to /usr
local DIR DIRS
DIRS="bin include lib"
if [ "lib" != "$(get_libdir)" ]; then
DIRS="${DIRS} $(get_libdir)"
fi
for DIR in ${DIRS}; do
migrate /usr/X11R6/${DIR} /usr/${DIR}
done
# Can't do this in the other loop because of different start and end
migrate /usr/X11R6/man /usr/share/man
fi
update_config_files
cleanup_fonts
# See above comment for the same test
if [ ! -L "/usr/X11R6" ]; then
# Needs to happen after cleanup_fonts()
migrate /usr/X11R6/$(get_libdir)/X11/fonts /usr/share/fonts
# Get rid of symlinks so we can migrate /usr/X11R6 without dying when a
# symlink tries to copy to a dir
einfo "Preparing for /usr/X11R6 -> /usr migration..."
local LINK LINKS
LINKS="bin include lib man share/info"
if [ "lib" != "$(get_libdir)" ]; then
LINKS="${LINKS} $(get_libdir)"
fi
for LINK in ${LINKS}; do
if [ -L "${ROOT}/usr/X11R6/${LINK}" ]; then
rm -fv ${ROOT}/usr/X11R6/${LINK}
fi
done
einfo "Remaining symlinks in /usr/X11R6:"
find ${ROOT}/usr/X11R6/ -type l
# Woohoo, nothing in /usr/X11R6 after this
migrate /usr/X11R6 /usr
fi
move_app_defaults_to_etc
move_xkb_to_usr
# Run this even for USE=-opengl, to clean out old stuff from possible
# USE=opengl build
dynamic_libgl_preinst
}
pkg_postinst() {
env-update
if [ "${ROOT}" = "/" ]; then
font_setup
if use opengl; then
switch_opengl_implem
fi
fi
remove_old_compose_files
setup_tmp_files
print_info
}
pkg_postrm() {
fix_links
}
###############
# pkg_setup() #
###############
cflag_setup() {
# Set up CFLAGS
filter-flags "-funroll-loops"
ALLOWED_FLAGS="-fstack-protector -march -mcpu -mtune -O -O0 -O1 -O2 -O3 -Os"
ALLOWED_FLAGS="${ALLOWED_FLAGS} -pipe -fomit-frame-pointer"
ALLOWED_FLAGS="${ALLOWED_FLAGS} -momit-leaf-frame-pointer"
ALLOWED_FLAGS="${ALLOWED_FLAGS} -g -g0 -g1 -g2 -g3"
ALLOWED_FLAGS="${ALLOWED_FLAGS} -ggdb -ggdb0 -ggdb1 -ggdb2 -ggdb3"
# arch-specific section added by popular demand
case "${ARCH}" in
mips) ALLOWED_FLAGS="${ALLOWED_FLAGS} -mips1 -mips2 -mips3 -mips4 -mabi"
;;
# -fomit-frame-pointer known to break things and is pointless
# according to ciaranm
# And hardened compiler must be softened. -- fmccor, 20.viii.04
sparc) filter-flags "-fomit-frame-pointer" "-momit-leaf-frame-pointer"
if has_hardened && ! use dlloader; then
einfo "Softening gcc for sparc."
ALLOWED_FLAGS="${ALLOWED_FLAGS} -fno-pie -fno-PIE"
append-flags -fno-pie -fno-PIE
fi
if [[ ${ABI} == "sparc64" ]]; then
ALLOWED_FLAGS="${ALLOWED_FLAGS} -D__sparc_v9__ -D__linux_sparc_64__"
append-flags -D__sparc_v9__ -D__linux_sparc_64__
fi
;;
# gcc-3.3.2 causes invalid insn error
hppa ) replace-cpu-flags 2.0 1.0
;;
esac
# Recently there has been a lot of stability problem in Gentoo-land. Many
# things can be the cause to this, but I believe that it is due to gcc3
# still having issues with optimizations, or with it not filtering bad
# combinations (protecting the user maybe from themselves) yet.
#
# This can clearly be seen in large builds like glibc, where too aggressive
# CFLAGS cause the tests to fail miserbly.
#
# Quote from Nick Jones <[email protected]>, who in my opinion
# knows what he is talking about:
#
# People really shouldn't force code-specific options on... It's a
# bad idea. The -march options aren't just to look pretty. They enable
# options that are sensible (and include sse,mmx,3dnow when appropriate).
#
# The next command strips CFLAGS and CXXFLAGS from nearly all flags. If
# you do not like it, comment it, but do not bugreport if you run into
# problems.
#
# <[email protected]> (13 Oct 2002)
strip-flags
}
check_pam() {
if use pam && best_version x11-base/${PN}; then
einfo "Previous ${PN} installation detected."
einfo "Enabling PAM features in ${PN}."
else
einfo "Previous ${PN} installation NOT detected."
einfo "Disabling PAM features in ${PN}."
einfo "You must remerge ${PN} to enable pam."
einfo "See http://bugs.gentoo.org/show_bug.cgi?id=35468."
fi
}
check_use_combos() {
if use static; then
# A static build disallows building the SDK.
# See config/xf86.rules.
if use sdk; then
die "The static USE flag is incompatible with the sdk USE flag."
fi
fi
if use dmx && use doc; then
die "The dmx and doc USE flags are temporarily incompatible and result in a dead build."
fi
# (#77949)
if use minimal && use doc; then
die "The minimal and doc USE flags are temporarily incompatible and result in a dead build."
fi
if use xv && ! use opengl; then
eerror "See http://bugs.gentoo.org/show_bug.cgi?id=67996"
eerror "The xv USE flag currently requires the opengl flag."
die "This is a known bug. Do not report it."
fi
if use opengl && ! use xv; then
eerror "See http://bugs.gentoo.org/show_bug.cgi?id=76936"
eerror "The opengl USE flag currently requires the xv flag."
die "This is a known bug. Do not report it."
fi
# Echo a message to the user about bitmap-fonts
if ! use bitmap-fonts; then
ewarn "Please emerge this with USE=\"bitmap-fonts\" to enable"
ewarn "75dpi and 100dpi fonts. Your GTK+-1.2 fonts may look"
ewarn "screwy otherwise"
ebeep 5
epause 10
fi
}
setup_multilib() {
# on amd64 we need /usr/lib64/X11/locale/lib to be a symlink
# created by the emul lib ebuild in order for adobe acrobat, staroffice,
# and a few other apps to work.
if ! has_multilib_profile; then
use amd64 && get_libdir_override lib64
fi
}
################
# src_unpack() #
################
unpack_all() {
# Unpack source and patches
ebegin "Unpacking ${PV} source"
unpack X11R${PV}-src.tar.bz2 > /dev/null
# unpack X11R${PV}-src{1,2,3,4,5}.tar.gz > /dev/null
eend 0
# if use doc; then
# ebegin "Unpacking documentation"
# unpack X11R${PV}-src{6,7}.tar.gz > /dev/null
# eend 0
# fi
ebegin "Unpacking Gentoo files and patches"
unpack ${P}-files-${FILES_VER}.tar.bz2 > /dev/null
unpack ${P}-patches-${PATCH_VER}.tar.bz2 > /dev/null
eend 0
if ! use minimal; then
# Unpack TaD's gentoo cursors
ebegin "Unpacking Gentoo cursors"
unpack gentoo-cursors-tad-${XCUR_VER}.tar.bz2 > /dev/null
eend 0
fi
# Unpack extra fonts stuff from Mandrake
ebegin "Unpacking fonts"
if use nls; then
unpack gemini-koi8-u.tar.bz2 > /dev/null
fi
unpack eurofonts-X11.tar.bz2 > /dev/null
if use font-server; then
unpack xfsft-encodings-${XFSFT_ENC_VER}.tar.bz2 > /dev/null
fi
eend 0
# Remove bum encoding
rm -f ${WORKDIR}/usr/share/fonts/encodings/urdunaqsh-0.enc
}
do_patch() {
# Bulk patching - based on patch name
# Will create excluded stuff once it's needed
cd ${WORKDIR}
EPATCH_SUFFIX="patch" \
epatch ${PATCHDIR}
cd ${S}
epatch ${FILESDIR}/xorg-x11-6.8.x-gb18030.patch
cd ${WORKDIR}/files
epatch ${FILESDIR}/xinitrc.patch
cd ${S}
}
host_def_setup() {
HOSTCONF="config/cf/host.def"
ebegin "Setting up ${HOSTCONF}"
cd ${S}; cp ${FILES_DIR}/site.def ${HOSTCONF} \
|| die "host.def copy failed"
echo "#define XVendorString \"Gentoo (The X.Org Foundation ${PV}, revision ${PR}-${PATCH_VER})\"" \
>> ${HOSTCONF}
# Pending http://bugs.gentoo.org/show_bug.cgi?id=49038 and
# http://freedesktop.org/cgi-bin/bugzilla/show_bug.cgi?id=600
#
# Makes ld bail at link time on undefined symbols
# Suggested by Mike Harris <[email protected]>
#echo "#define SharedLibraryLoadFlags -shared -Wl,-z,defs" \
# >> ${HOSTCONF}
# Enable i810 on x86_64 (RH #126687)
if use amd64; then
echo "#define XF86ExtraCardDrivers i810" >> ${HOSTCONF}
fi
# FHS install locations
echo "#define ManDirectoryRoot /usr/share/man" >> ${HOSTCONF}
echo "#define DocDir /usr/share/doc/${PF}" >> ${HOSTCONF}
echo "#define FontDir /usr/share/fonts" >> ${HOSTCONF}
echo "#define BinDir /usr/bin" >> ${HOSTCONF}
echo "#define IncRoot /usr/include" >> ${HOSTCONF}
# This breaks the case when $(SYSTEMUSRINCDIR) = $(INCDIR)
# See xc/include/Imakefile
echo "#define LinkGLToUsrInclude NO" >> ${HOSTCONF}
# /usr/X11R6/lib/X11
echo "#define LibDir /usr/$(get_libdir)/X11" >> ${HOSTCONF}
# /usr/X11R6/lib with exception of /usr/X11R6/lib/X11
echo "#define UsrLibDir /usr/$(get_libdir)" >> ${HOSTCONF}
# Make man4 and man7 stuff get 'x' suffix like everything else
# Necessary so we can install to /usr/share/man without overwriting
echo "#define DriverManDir \$(MANSOURCEPATH)4" >> ${HOSTCONF}
echo "#define DriverManSuffix 4x /* use just one tab or cpp will die */" \
>> ${HOSTCONF}
echo "#define MiscManDir \$(MANSOURCEPATH)7" >> ${HOSTCONF}
echo "#define MiscManSuffix 7x /* use just one tab or cpp will die */" \
>> ${HOSTCONF}
# Don't build xterm -- use external (#54051)
echo "#define BuildXterm NO" >> ${HOSTCONF}
# Xwrapper has been removed so we now need to use the set uid server
# again, this mustve happened somewhere after 4.3.0 in the development.
echo "#define InstallXserverSetUID YES" >> ${HOSTCONF}
echo "#define BuildServersOnly NO" >> ${HOSTCONF}
# Don't use /lib64 if $(get_libdir) != lib64
# Replaces 0181_all_4.3.0-amd64-nolib64.patch
if [ "$(get_libdir)" == "lib64" ]; then
echo "#define HaveLib64 YES" >> ${HOSTCONF}
sed -i '/^#define Freetype2LibDir/s:^.*$:#define Freetype2LibDir /usr/lib64:' ${HOSTCONF}
else
echo "#define HaveLib64 NO" >> ${HOSTCONF}
fi
# Set location of DRM source to be installed
echo "#define InstSrcDir ${ROOT}/usr/src/${PF}" >> ${HOSTCONF}
if [ "$(gcc-major-version)" -eq "3" ]; then
if use x86; then
# Should fix bug #4189. gcc 3.x have problems with
# -march=pentium4 and -march=athlon-tbird
# Seems fixed on 3.3 and higher
if [ "$(gcc-minor-version)" -le "2" ]; then
replace-cpu-flags pentium4 pentium3
replace-cpu-flags athlon athlon-tbird
fi
if [ "$(gcc-minor-version)" -eq "4" ]; then
if [ "$(gcc-micro-version)" -lt "4" ]; then
#to fix #57602 for now, thanks Spanky (broken sse2)
if test_flag -mno-sse2; then
append-flags -mno-sse2
fi
# (#75067) broken sse3
if test_flag -mno-sse3; then
append-flags -mno-sse3
fi
fi
fi
# Try a fix for #49310, see #50931 for more info. <spyderous>
if [ "$(is-flag -fomit-frame-pointer)" ]; then
replace-cpu-flags k6 k6-2 k6-3 i586
fi
fi
# Without this, modules breaks with gcc3
if [ "$(gcc-minor-version)" -eq "1" ]; then
append-flags "-fno-merge-constants"
append-flags "-fno-merge-constants"
fi
if [ "$(gcc-minor-version)" -eq "2" ]; then
if [ "$(gcc-micro-version)" -lt "2" ]; then
# Bug #12775 .. fails with -Os.
replace-flags "-Os" "-O2"
fi
elif [ "$(gcc-minor-version)" -lt "2" ]; then
# Bug #12775 .. fails with -Os.
replace-flags "-Os" "-O2"
fi
elif [ "$(gcc-major-version)" -lt "3" ]; then
# Bug #12775 .. fails with -Os.
replace-flags "-Os" "-O2"
fi
echo "#define CcCmd $(tc-getCC)" >> ${HOSTCONF}
echo "#define OptimizedCDebugFlags ${CFLAGS} GccAliasingArgs" >> ${HOSTCONF}
echo "#define OptimizedCplusplusDebugFlags ${CXXFLAGS} GccAliasingArgs" >> ${HOSTCONF}
if use static; then
echo "#define DoLoadableServer NO" >>${HOSTCONF}
else
einfo "Setting DoLoadableServer to YES."
echo "#define DoLoadableServer YES" >> ${HOSTCONF}
if use dlloader; then
einfo "Setting MakeDllModules to YES."
echo "#define MakeDllModules YES" >> ${HOSTCONF}
if has_hardened; then
echo "#define HardenedGccSpecs YES" >> ${HOSTCONF}
fi
else
einfo "Setting MakeDllModules to NO."
echo "#define MakeDllModules NO" >> ${HOSTCONF}
fi
fi
use_build debug XFree86Devel
use_build debug BuildDebug
use_build debug DebuggableLibraries
if ! use debug; then
# use less ram .. got this from Spider's makeedit.eclass 
echo "#define GccWarningOptions -Wno-return-type -w" \
>> ${HOSTCONF}
fi
# Remove circular dep between pam and X11, bug #35468
# If pam is in USE and we have X11, then we can enable PAM
# if use pam && [ "$(best_version x11-base/xorg-x11)" ]
if [ "$(best_version x11-base/xorg-x11)" ]; then
# If you want to have optional pam support, do it properly ...
use_build pam HasPam
use_build pam HasPamMisc
fi
if use x86 || use alpha; then
# build with glide3 support? (build the tdfx_dri.o module)
if use 3dfx; then
echo "#define HasGlide3 YES" >> ${HOSTCONF}
fi
# This won't work unless we can disable building the tdfx stuff
# entirely :/
# use_build 3dfx HasGlide3
fi
if use x86; then
# optimize Mesa for architecture
use_build mmx HasMMXSupport
use_build 3dnow Has3DNowSupport
use_build sse HasSSESupport
fi
# optimize Mesa for architecture
if use amd64; then
use_build amd64 HasMMXSupport
use_build amd64 Has3DNowSupport
use_build amd64 HasSSESupport
fi
# Do we want the glx extension? This will turn off XF86DRI if it's off.
# DRI can't build if glx isn't built, so keep this below DRI define.
# Do this before hppa so they can turn DRI off
use_build opengl BuildGlxExt
use_build opengl BuildGLXLibrary
use_build opengl BuildXF86DRI
# Needs GL headers
use_build opengl BuildGLULibrary
if use mips; then
echo "#define XF86CardDrivers fbdev newport" >> ${HOSTCONF}
fi
# Make xv optional for more minimal builds
use_build xv BuildXvLibrary
use_build xv BuildXvExt
# Depends on X11/extensions/Xv.h
use_build xv BuildXF86RushExt
use_build xv BuildXF86RushLibrary
if use hppa; then
echo "#define DoLoadableServer NO" >> ${HOSTCONF}
echo "#define BuildXF86DRI NO" >> config/cf/host.def
echo "#undef DriDrivers" >> config/cf/host.def
echo "#define XF86CardDrivers fbdev" >> config/cf/host.def
echo "#define BuildXvExt YES" >> config/cf/host.def
fi
if use alpha; then
echo "#define XF86CardDrivers mga nv tga s3virge sis rendition \
i740 tdfx cirrus tseng fbdev \
ati vga v4l glint s3 vesa" >> ${HOSTCONF}
fi
if use ppc; then
echo "#define XF86CardDrivers mga glint s3virge sis savage trident \
chips tdfx fbdev ati DevelDrivers vga nv imstt \
XF86OSCardDrivers XF86ExtraCardDrivers" >> ${HOSTCONF}
fi
if use ppc64; then
echo "#define MakeDllModules YES" >> ${HOSTCONF}
echo "#define XF86VgaHw YES" >> ${HOSTCONF}
echo "#define XF86FBDevHw YES" >> ${HOSTCONF}
echo "#define XF86CardDrivers mga fbdev v4l ati vga nv" >> ${HOSTCONF}
fi
if use sparc; then
echo "#define XF86CardDrivers sunffb sunleo suncg6 suncg3 suncg14 \
suntcx sunbw2 glint mga tdfx ati savage vesa vga fbdev \
XF86OSCardDrivers XF86ExtraCardDrivers \
DevelDrivers" >> ${HOSTCONF}
if has_hardened && ! use dlloader; then
einfo "Softening the assembler so cfb modules will play nice with sunffb."
echo "#define AsCmd CcCmd -c -x assembler -fno-pie -fno-PIE" >> ${HOSTCONF}
echo "#define ModuleAsCmd CcCmd -c -x assembler -fno-pie -fno-PIE" >> ${HOSTCONF}
fi
if ( [ -e "${ROOT}/usr/src/linux" ] \
&& ! kernel_is "2" "6" ) \
|| [ "$(uname -r | cut -d. -f1,2)" != "2.6" ]; then
einfo "Building for kernels less than 2.6 requires special treatment."
echo "#define UseDeprecatedKeyboardDriver YES" >> ${HOSTCONF}
einfo "Avoid bug #46593 for sparc32-SMP with kernel 2.4.xx."
echo "/* Add a line to avoid bug #56593 on sparc32 */" >> \
programs/Xserver/hw/xfree86/drivers/ati/r128_driver.c
fi
fi
# The definitions for fontconfig
echo "#define UseFontconfig YES" >> ${HOSTCONF}
echo "#define HasFontconfig YES" >> ${HOSTCONF}
# Use the xorg Xft2 lib
echo "#define SharedLibXft YES" >> ${HOSTCONF}
# with USE="X doc' circular dep w/ virtual/ghostscript
# echo "#define HasGhostScript ${DOC}" >> ${HOSTCONF}
# Caused issues, basic docs aren't installed
use_build doc BuildLinuxDocPS
use_build doc BuildSpecsDocs
use_build doc BuildHtmlManPages
use_build doc InstallHardcopyDocs
# enable Japanese docs, optionally
use doc && use_build cjk InstallJapaneseDocs
# Native Language Support Fonts
use_build nls BuildCyrillicFonts
use_build nls BuildArabicFonts
use_build nls BuildGreekFonts
use_build nls BuildHebrewFonts
use_build nls BuildThaiFonts
if use nls; then
use_build cjk BuildCIDFonts
use_build cjk BuildJapaneseFonts
use_build cjk BuildKoreanFonts
use_build cjk BuildChineseFonts
fi
# Crappy bitmap fonts
use_build bitmap-fonts Build75DpiFonts
use_build bitmap-fonts Build100DpiFonts
# Type1 fonts
use_build type1-fonts BuildType1Fonts
# TrueType fonts
use_build truetype-fonts BuildTrueTypeFonts
# X Font Server
use_build font-server BuildFontServer
# Distributed Multiheaded X
use_build dmx BuildDmx
use_build insecure-drivers BuildDevelDRIDrivers
if use ipv6; then
# In case Gentoo ever works on a system with IPv6 sockets that don't
# also listen on IPv4 (see config/cf/X11.tmpl)
echo "#define PreferXdmcpIPv6 YES" >> ${HOSTCONF}
fi
use_build ipv6 BuildIPv6
if use minimal; then
# Don't build static libs
echo "#define ForceNormalLib NO" >> ${HOSTCONF}
# Turn back on needed ones
echo "#define NormalLibXau YES" >> ${HOSTCONF}
echo "#define BuildDPSLibraries NO" >> ${HOSTCONF}
echo "#define BuildClients NO" >> ${HOSTCONF}
# BuildClients doesn't catch things in xc/programs/Xserver
# Also had to add
# 9250_all_6.8.1.904-respect-xfree86configtools-setting.patch
echo "#define BuildXFree86ConfigTools NO" >> ${HOSTCONF}
echo "#define BuildLBX NO" >> ${HOSTCONF}
# Weird crap we don't need
echo "#define XF8_32Wid NO" >> ${HOSTCONF}
echo "#define XF8_32Bpp NO" >> ${HOSTCONF}
echo "#define XF8_16Bpp NO" >> ${HOSTCONF}
echo "#define XF24_32Bpp NO" >> ${HOSTCONF}
# Without nls, truetype-fonts, type1-fonts, we only build misc
# Now let's try to reduce what gets built in misc
# iso8859-1 has the "fixed" font
echo "#define BuildISO8859_2Fonts NO" >> ${HOSTCONF}
echo "#define BuildISO8859_3Fonts NO" >> ${HOSTCONF}
echo "#define BuildISO8859_4Fonts NO" >> ${HOSTCONF}
# 5 is cyrillic, 6 isn't in misc, 7 is greek, 8 is hebrew
echo "#define BuildISO8859_9Fonts NO" >> ${HOSTCONF}
echo "#define BuildISO8859_10Fonts NO" >> ${HOSTCONF}
# 11 is thai, 12 isn't in misc
echo "#define BuildISO8859_13Fonts NO" >> ${HOSTCONF}
echo "#define BuildISO8859_14Fonts NO" >> ${HOSTCONF}
echo "#define BuildISO8859_15Fonts NO" >> ${HOSTCONF}
echo "#define BuildISO8859_16Fonts NO" >> ${HOSTCONF}
echo "#define XnestServer NO" >> ${HOSTCONF}
echo "#define XVirtualFramebufferServer NO" >> ${HOSTCONF}
echo "#define XInputDrivers mouse keyboard" >> ${HOSTCONF}
# If you want more drivers built with minimal, file a bug
# -Donnie Berkholz <[email protected]>
if use x86; then
# Remove glint, tga, s3, s3virge, rendition, neomagic, i740,
# cirrus, tseng, trident, chips, apm, ark, cyrix, siliconmotion
# mga, nv, sis, tdfx, savage, GlideDriver, i386Drivers
# (nsc, i810), ati, DevelDrivers, via
# Leave vmware driver for testing minimal setups using VMWare
# XF86OSCardDrivers includes v4l and fbdev on linux
# DevelDrivers includes imstt and newport on x86
echo "#define XF86CardDrivers vmware vesa vga dummy \
XF86OSCardDrivers XF86ExtraCardDrivers" >> ${HOSTCONF}
# (#93339)
elif use sparc; then
echo "#define XF86CardDrivers vesa vga fbdev sunffb suncg6 \
sunleo" >> ${HOSTCONF}
fi
fi
# Ajax is the man for getting this going for us
echo "#define ProPoliceSupport YES" >> ${HOSTCONF}
# Make xprint optional
use_build xprint BuildXprint
use_build xprint BuildXprintClients
# Build libXp even when xprint is off. It's just for clients, server
if ! use xprint; then
echo "#define BuildXprintLib YES" >> ${HOSTCONF}
fi
# End the host.def definitions here
eend 0
}
patch_setup() {
einfo "Excluding patches..."
# This patch is just plain broken. Results in random failures.
patch_exclude 0120*parallel-make
# Hardened patches (both broken)
patch_exclude 9960_all_4.3.0-exec-shield-GNU
patch_exclude 9961_all_4.3.0-libGL-exec-shield
# Xbox nvidia driver, patch is a total hack, tears apart xc/config/cf
# (#68726). Only apply when necessary so we don't screw other stuff up.
# 9990 is the driver, 9991 is xbox pci scanning (potentially useful)
if [ ! "${PROFILE_ARCH}" = "xbox" ]; then
patch_exclude 9990 9991
fi
# this patch comments out the Xserver line in xdm's config
# We only want it here
if ! use s390; then
patch_exclude 7500
fi
# if ! use gatos; then
# patch_exclude 9841_all_4.3.0-gatos-mesa
# fi
if use debug; then
patch_exclude 5901*acecad-debug
fi
# TDFX_RISKY - 16-bit, 1024x768 or higher on low-memory voodoo3's
if use 3dfx && [ "${TDFX_RISKY}" = "yes" ]; then
patch_exclude 5850
else
patch_exclude 5851
fi
# Glibc-specific patches to exclude for non-glibc systems
if use elibc_FreeBSD || use elibc_OpenBSD; then
patch_exclude 0700
fi
einfo "Done excluding patches."
}
use_specific_hacks() {
# uclibc lacks sinf and cosf
if use uclibc; then
sed -i -e 's:GLXCLIENTDIRS = glxinfo glxgears:GLXCLIENTDIRS = :' \
${S}/programs/Imakefile
fi
# Get rid of cursor sets other than core and handhelds, saves ~4MB
if use minimal; then
sed -i -e 's:SUBDIRS = redglass whiteglass handhelds:SUBDIRS = handhelds:' \
${S}/programs/xcursorgen/Imakefile
fi
cd ${S}
if use doc; then
# These are not included anymore as they are obsolete
local x
for x in ${S}/programs/Xserver/hw/xfree86/{XF98Conf.cpp,XF98Config}; do
if [ -f ${x} ]; then
sed -i '/Load[[:space:]]*"\(pex5\|xie\)"/d' ${x}
fi
done
fi
}
#################
# src_compile() #
#################
build() {
# If a user defines the MAKE_OPTS variable in /etc/make.conf instead of
# MAKEOPTS, they'll redefine an internal xorg Makefile variable and the
# xorg build will silently die. This is tricky to track down, so I'm
# adding a preemptive fix for this issue by making sure that MAKE_OPTS is
# unset. (drobbins, 08 Mar 2003)
unset MAKE_OPTS
einfo "Building xorg-x11..."
if use debug; then
chmod u+x ${S}/config/util/makeg.sh
FAST=1 ${S}/config/util/makeg.sh World WORLDOPTS="" MAKE="make" \
|| die "debug make World failed"
else
FAST=1 emake -j1 World WORLDOPTS="" MAKE="make" || die "make World failed"
fi
if use nls; then
emake -j1 -C ${S}/nls MAKE="make" || die "nls build failed"
fi
}
#################
# src_install() #
#################
install_everything() {
unset MAKE_OPTS
einfo "Installing X.org X11..."
# gcc3 related fix. Do this during install, so that our
# whole build will not be compiled without mmx instructions.
if [ "$(gcc-version)" != "2.95" ] && use x86; then
make install MAKE="make" DESTDIR=${D} \
|| make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \
CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \
install MAKE="make" DESTDIR=${D} || die "install failed"
else
make install MAKE="make" DESTDIR=${D} || die "install failed"
fi
if use sdk; then
einfo "Installing X.org X11 SDK..."
make install.sdk MAKE="make" DESTDIR=${D} || die "sdk install failed"
fi
if ! use minimal; then
einfo "Installing man pages..."
make install.man MAKE="make" DESTDIR=${D} || die "man page install failed"
einfo "Compressing man pages..."
prepman /usr
fi
if use nls; then
cd ${S}/nls
make MAKE="make" DESTDIR=${D} install || die "nls install failed"
fi
dodoc ${S}/RELNOTES
}
backward_compat_install() {
# Backwards compatibility for /usr/share move
dosym ../../share/fonts /usr/$(get_libdir)/X11/fonts
# Have the top-level libdir symlink made first, so real dirs don't get created
local DIR DIRS
if [ "lib" != "$(get_libdir)" ]; then
DIRS="${DIRS} $(get_libdir)"
fi
for DIR in ${DIRS}; do
dosym ../${DIR} /usr/X11R6/${DIR}
done
dosym ../../../share/doc/${PF} /usr/X11R6/$(get_libdir)/X11/doc
}
fix_permissions() {
# Fix permissions on locale/common/*.so
local x
for x in ${D}/usr/$(get_libdir)/X11/locale/$(get_libdir)/common/*.so*; do
if [ -f ${x} ]; then
fperms 0755 ${x/${D}}
fi
done
# Fix permissions on modules ...
for x in $(find ${D}/usr/$(get_libdir)/modules -name '*.o' -o -name '*.so'); do
if [ -f ${x} ]; then
fperms 0755 ${x/${D}}
fi
done
# Fix perms
if ! use minimal; then
fperms 755 /usr/$(get_libdir)/X11/xkb/geometry/sgi /usr/bin/dga
fi
}
zap_host_def_cflags() {
ebegin "Fixing $(get_libdir)/X11/config/host.def"
cp ${D}/usr/$(get_libdir)/X11/config/host.def ${T}
awk '!/OptimizedCDebugFlags|OptimizedCplusplusDebugFlags|GccWarningOptions/ {print $0}' \
${T}/host.def > ${D}/usr/$(get_libdir)/X11/config/host.def \
|| eerror "Munging host.def failed"
# theoretically, /usr/lib/X11/config is a possible candidate for
# config file management. If we find that people really worry about imake
# stuff, we may add it. But for now, we leave the dir unprotected.
eend 0
}
add_euro_support() {
ebegin "Adding Euro support"
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
${D}/usr/bin/bdftopcf -t ${WORKDIR}/Xlat9-8x14.bdf | \
gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-8x14-lat9.pcf.gz
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
${D}/usr/bin/bdftopcf -t ${WORKDIR}/Xlat9-9x16.bdf | \
gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-9x16-lat9.pcf.gz
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/$(get_libdir)" \
${D}/usr/bin/bdftopcf -t ${WORKDIR}/Xlat9-10x20.bdf | \
gzip -9 > ${D}/usr/share/fonts/misc/Xlat9-10x20-lat9.pcf.gz
eend 0
}
setup_standard_symlinks() {
# Standard symlinks
dodir /usr/{bin,include,$(get_libdir)}
dosym ../bin /usr/bin/X11
# Stop complains about "file or directory not existing"
dodir /usr/X11R6
dosym ../include /usr/X11R6/include
dosym ../../usr/$(get_libdir)/X11/xkb /etc/X11/xkb
# Some critical directories
if ! use minimal; then
keepdir /var/lib/xdm
dosym ../../../var/lib/xdm /etc/X11/xdm/authdir
fi
# Backwards compat, FHS, etc.
dosym ../../usr/X11R6/bin/Xorg /etc/X11/X
}
libtool_archive_install() {
if use opengl; then
# .la files for libtool support
insinto /usr/$(get_libdir)
# (#67729) Needs to be lib, not $(get_libdir)
doins ${FILES_DIR}/lib/*.la
fi
}
fix_libtool_libdir_paths() {
local dirpath
for archive in ${*} ; do
dirpath=$(dirname ${archive} | sed -e "s:^${D}::")
[[ ${dirpath::1} == "/" ]] || dirpath="/"${dirpath}
sed -i ${archive} -e "s:^libdir.*:libdir=\'${dirpath}\':"
done
}
compose_files_install() {
# Hack from Mandrake (update ours that just created Compose files for
# all locales)
local x
for x in $(find ${D}/usr/$(get_libdir)/X11/locale/ -mindepth 1 -type d); do
# make empty Compose files for some locales
# CJK must not have that file (otherwise XIM don't works some times)
case $(basename ${x}) in
C|microsoft-*|iso8859-*|koi8-*)
if [ ! -f ${x}/Compose ]; then
touch ${x}/Compose
fi
;;
ja*|ko*|zh*)
if [ -r ${x}/Compose ]; then
rm -f ${x}/Compose
fi
;;
esac
done
# Another hack from Mandrake -- to fix dead + space for the us
# international keyboard
local i
for i in ${D}/usr/$(get_libdir)/X11/locale/*/Compose; do
sed -i \
-e 's/\(<dead_diaeresis> <space>\).*$/\1 : "\\"" quotedbl/' \
-e "s/\(<dead_acute> <space>\).*$/\1 : \"'\" apostrophe/" ${i} \
|| eerror "sed ${i} failed"
done
}
encode_xfsft_files() {
# Yet more Mandrake
ebegin "Encoding files for xfsft font server"
dodir /usr/share/fonts/encodings
cp -a ${WORKDIR}/usr/share/fonts/encodings/* \
${D}/usr/share/fonts/encodings
for x in ${D}/usr/share/fonts/encodings/{.,large}/*.enc; do
if [ -f "${x}" ]; then
gzip -9 -f ${x} \
|| eerror "gzipping ${x} failed"
fi
done
eend 0
}
koi8_fonts_install() {
ebegin "Adding gemini-koi8 fonts"
cd ${WORKDIR}/ukr
gunzip *.Z || eerror "gunzipping gemini-koi8 fonts failed"
gzip -9 *.pcf || eerror "gzipping gemini-koi8 fonts failed"
cd ${S}
cp -a ${WORKDIR}/ukr ${D}/usr/share/fonts \
|| eerror "copying gemini-koi8 fonts failed"
eend 0
}
etc_files_install() {
insinto /etc/X11
# Install example config file
newins ${S}/programs/Xserver/hw/xfree86/xorg.conf xorg.conf.example
exeinto /etc/X11
# new session management script
doexe ${FILES_DIR}/chooser.sh
# new display manager script
doexe ${FILES_DIR}/startDM.sh
exeinto /etc/X11/Sessions
# doexe skips directories, so this should be safe
doexe ${FILES_DIR}/Sessions/*
insinto /etc/env.d
doins ${FILES_DIR}/10xorg
insinto /etc/X11/xinit
doins ${FILES_DIR}/xinitrc
if ! use minimal; then
exeinto /etc/X11/xdm
doexe ${FILES_DIR}/Xsession
exeinto /etc/init.d
newexe ${FILES_DIR}/xdm.start xdm
fi
if use font-server; then
insinto /etc/X11/fs
newins ${FILES_DIR}/xfs.config config
fi
if use pam; then
insinto /etc/pam.d
newins ${FILES_DIR}/xdm.pamd xdm
# Need to fix console permissions first
newins ${FILES_DIR}/xserver.pamd xserver
fi
if use font-server; then
newexe ${FILES_DIR}/xfs.start xfs
insinto /etc/conf.d
newins ${FILES_DIR}/xfs.conf.d xfs
fi
}
dynamic_libgl_install() {
# next section is to setup the dynamic libGL stuff
ebegin "Moving libGL and friends for dynamic switching"
dodir /usr/$(get_libdir)/opengl/${PN}/{lib,extensions,include}
local x=""
for x in ${D}/usr/$(get_libdir)/libGL.so* \
${D}/usr/$(get_libdir)/libGL.la \
${D}/usr/$(get_libdir)/libGL.a; do
if [ -f ${x} -o -L ${x} ]; then
# libGL.a cause problems with tuxracer, etc
mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/lib
fi
done
for x in ${D}/usr/$(get_libdir)/modules/extensions/libglx*; do
if [ -f ${x} -o -L ${x} ]; then
mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/extensions
fi
done
# glext.h added for #54984
for x in ${D}/usr/include/GL/{gl.h,glx.h,glxtokens.h,glext.h,glxext.h,glxmd.h,glxproto.h}; do
if [ -f ${x} -o -L ${x} ]; then
mv -f ${x} ${D}/usr/$(get_libdir)/opengl/${PN}/include
fi
done
eend 0
}
cursor_install() {
# Make the core cursor the default. People seem not to like whiteglass
# for some reason.
dosed 's:whiteglass:core:' /usr/share/cursors/${PN}/default/index.theme
if ! use minimal; then
install_extra_cursors
fi
}
strip_execs() {
if use debug || has nostrip ${FEATURES}; then
ewarn "Debug build turned on by USE=debug or FEATURES=nostrip"
ewarn "NOT stripping binaries and libraries"
else
local STRIP
if [ ! -z "${CBUILD}" ] && [ "${CBUILD}" != "${CHOST}" ]; then
STRIP=${CHOST}-strip
else
STRIP=strip
fi
einfo "Stripping binaries and libraries..."
# This bit I got from Redhat ... strip binaries and drivers ..
# NOTE: We do NOT want to strip the drivers, modules or DRI modules!
local x
for x in $(find ${D}/ -type f -perm +0111 -exec file {} \; | \
grep -v ' shared object,' | \
sed -n -e 's/^\(.*\):[ ]*ELF.*, not stripped/\1/p'); do
if [ -f ${x} ]; then
# Dont do the modules ...
if [ "${x/\/usr\/$(get_libdir)\/modules}" = "${x}" ]; then
echo "$(echo ${x/${D}})"
${STRIP} ${x} || :
fi
fi
done
# Now do the libraries ...
for x in ${D}/usr/{$(get_libdir),$(get_libdir)/opengl/${PN}/lib}/*.so.* \
$(get_libdir)/X11/locale/$(get_libdir)/common}/*.so.*; do
if [ -f ${x} ]; then
echo "$(echo ${x/${D}})"
${STRIP} --strip-debug ${x} || :
fi
done
fi
}
install_extra_cursors() {
# Install TaD's gentoo cursors
insinto /usr/share/cursors/${PN}/gentoo/cursors
doins ${WORKDIR}/cursors/gentoo/cursors/*
insinto /usr/share/cursors/${PN}/gentoo-blue/cursors
doins ${WORKDIR}/cursors/gentoo-blue/cursors/*
insinto /usr/share/cursors/${PN}/gentoo-silver/cursors
doins ${WORKDIR}/cursors/gentoo-silver/cursors/*
}
minimal_install() {
# Get rid of all unnecessary fonts (saves ~5.5 MB)
find ${D}/usr/share/fonts/misc/ -name '*.pcf.gz' \
-not -name '*6x13*' -not -name 'cursor.pcf.gz' -exec rm {} \;
# Woohoo, another 772K
rm -rf ${D}/usr/share/doc
}
xprint_install() {
# If we want xprint, save the init script before deleting /etc/rc.d/
# Requested on #68316
if use xprint; then
xprint_init_install
else
# delete xprint stuff
rm -f ${D}/etc/{init,profile}.d/xprint*
rmdir --ignore-fail-on-non-empty ${D}/etc/{init,profile}.d
fi
# Remove the /etc/rc.d nonsense -- not everyone is RedHat
rm -rf ${D}/etc/rc.d
}
xprint_init_install() {
# RH-style init script, we provide a wrapper
exeinto /usr/$(get_libdir)/misc
doexe ${D}/etc/init.d/xprint
rm -f ${D}/etc/init.d/xprint
# Install the wrapper
newinitd ${FILES_DIR}/xprint.init xprint
# patch profile scripts
sed -i -e "s:/bin/sh.*get_xpserverlist:/usr/$(get_libdir)/misc/xprint get_xpserverlist:g" ${D}/etc/profile.d/xprint*
# move profile scripts, we can't touch /etc/profile.d/ in Gentoo
dodoc ${D}/etc/profile.d/xprint*
rm -f ${D}/etc/profile.d/xprint*
}
config_files_install() {
# Fix default config files after installing fonts to /usr/share/fonts
sed -i -e "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
-e "s:/usr/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
-e "s:/usr/$(get_libdir)/fonts:/usr/share/fonts:g" \
${D}/etc/X11/xorg.conf.example
if use font-server; then
sed -i "s:/usr/X11R6/$(get_libdir)/X11/fonts:/usr/share/fonts:g" \
${D}/etc/X11/fs/config
fi
# Work around upgrade problem where people have
# Option "XkbRules" "xfree86" in their config file
sed -i "s:^.*Option.*"XkbRules".*$::g" ${D}/etc/X11/xorg.conf.example
}
fix_opengl_symlinks() {
# Remove invalid symlinks
local LINK
for LINK in $(find ${D}/usr/$(get_libdir) \
-name libGL.* -type l); do
rm -f ${LINK}
done
# Create required symlinks
dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so
dosym libGL.so.1.2 /usr/$(get_libdir)/libGL.so.1
}
#################
# pkg_preinst() #
#################
# We need a symlink /usr/X11R6/dir -> /usr/dir so all the packages
# whose files we move don't lose track of them. As such, we need
# _absolutely nothing_ in /usr/X11R6/dir so we can make such a symlink.
# Donnie Berkholz <[email protected]> 20 October 2004
#
# Takes two arguments -- starting location and ending location
migrate() {
einfo "Migrating from ${1} to ${2}..."
# Strip trailing slash
if [ -z "${1##*/}" ]; then
set -- ${1%/} ${2}
fi
if [ -e ${ROOT}${1} ]; then
# If it's not a symlink (in other words, it should be a directory)
if [ ! -L ${ROOT}${1} ]; then
einfo " ${1} isn't a symlink, migrating..."
# Move everything
rsync \
--archive \
--update \
--links \
--hard-links \
--ignore-existing \
--stats \
--progress \
--verbose \
${ROOT}${1}/ ${ROOT}${2} > ${T}/migrate-${1//\//-}.log 2>&1
check_migrate_return
remove_migrated_files ${1}
if [ -e "${ROOT}${1}" ]; then
# Remove any floating .keep files so we can run rmdir
find ${ROOT}${1} -name '\.keep' -exec rm -f {} \;
# Get rid of the directory
rmdir ${ROOT}${1}
fi
make_symlinks ${1}
else
ewarn " ${1} is a symlink, not migrating"
fi
else
ewarn " ${1} doesn't exist, not migrating"
make_symlinks ${1}
fi
}
check_migrate_return() {
MIGRATE_RETURN="$?"
if [ "${MIGRATE_RETURN}" -eq "0" ]; then
einfo "rsync successful!"
else
die "rsync failed. Exit code: ${MIGRATE_RETURN}."
fi
# Migration fubars lib symlinks -- eradicator
if use amd64; then
if [[ -L ${ROOT}usr/lib64 ]]; then
rm ${ROOT}usr/lib64
ln -s lib ${ROOT}usr/lib64
elif [[ -L ${ROOT}usr/lib ]]; then
rm -f ${ROOT}usr/lib
ln -s lib64 ${ROOT}usr/lib
elif [[ -L ${ROOT}usr/lib32 ]]; then
if has_multilib_profile; then
ln -s lib ${ROOT}usr/lib32
else
ln -s ../emul/linux/x86/usr/lib ${ROOT}usr/lib32
fi
fi
fi
}
remove_migrated_files() {
# This is a copy instead of a move, so we need to get rid of what
# we copied. This is a little risky if it fails, so just do it on
# success.
# DO NOT proceed if we don't have an argument, or we kill root filesystem
if [ -z "${1}" ]; then
die "No argument to remove_migrated_files(). Want to `rm -rf ${ROOT}`?"
fi
if [ "${MIGRATE_RETURN}" -eq "0" ]; then
# rm -rfv ${ROOT}${1} > ${T}/migrate-remove-${1//\//-}.log 2>&1
rm -rfv ${ROOT}${1}
fi
}
make_symlinks() {
# Put a symlink in its place
# Special case: lib != libdir
if [ "${1##*/}" = "$(get_libdir)" -a "$(get_libdir)" != "lib" ]; then
einfo " Symlinking ${ROOT}usr/X11R6/lib -> $(get_libdir)"
ln -s $(get_libdir) ${ROOT}usr/X11R6/lib
# Special case: fonts
elif [ "${1##*/}" = "fonts" ]; then
einfo " Symlinking ${ROOT}${1} -> ../../share/fonts"
ln -s ../../share/fonts ${ROOT}${1}
# Special case: X11R6
elif [ "${1##*/}" = "X11R6" ]; then
einfo " Symlinking ${ROOT}${1} -> ../usr"
ln -s ../usr ${ROOT}${1}
else
einfo " Symlinking ${ROOT}${1} -> ../${1##*/}"
ln -s ../${1##*/} ${ROOT}${1}
fi
}
update_config_files() {
# Fix any installed config files for installing fonts to /usr/share/fonts
# This *needs* to be after all other installation so files aren't
# overwritten.
if [ "${ROOT}" = "/" ]; then
einfo "Preparing any installed configuration files for font move..."
FILES="/etc/X11/xorg.conf
/etc/X11/XF86Config-4
/etc/X11/XF86Config"
if use font-server; then
FILES="${FILES} /etc/X11/fs/config"
fi
# /etc/fonts/fonts.conf
# /etc/fonts/local.conf
local FILE
for FILE in ${FILES}; do
if [ -e ${FILE} ]; then
# New font paths
sed "s,/usr/X11R6/$(get_libdir)/X11/fonts,/usr/share/fonts,g" \
${ROOT}${FILE} > ${IMAGE}${FILE}
if [ "${FILE}" = "/etc/X11/xorg.conf" ] \
|| [ "${FILE}" = "/etc/X11/XF86Config" ] \
|| [ "${FILE}" = "/etc/X11/XF86Config-4" ]; then
# "keyboard" driver is deprecated and will be removed,
# switch to "kbd"
sed -i 's~^\([ \t]*Driver[ \t]\+\)"[kK]eyboard"~\1"kbd"~' \
${IMAGE}${FILE}
# This moved in the /usr/X11R6/libdir -> /usr/libdir change
sed -i \
-e 's~^\([ \t]*RgbPath[ \t]\+\)"/usr/X11R6/$(get_libdir)/X11/rgb"~\1"/usr/$(get_libdir)/X11/rgb"~' \
-e 's~^\([ \t]*RgbPath[ \t]\+\)"/usr/X11R6/lib/X11/rgb"~\1"/usr/lib/X11/rgb"~' \
${IMAGE}${FILE}
# Work around upgrade problem where people have
# Option "XkbRules" "xfree86" in their config file
sed -i "s:^.*Option.*\"XkbRules\".*$::g" \
${IMAGE}${FILE}
fi
fi
done
fi
}
cleanup_fonts() {
local G_FONTDIRS
G_FONTDIRS="Speedo encodings local misc util"
if use truetype-fonts; then
G_FONTDIRS="${G_FONTDIRS} TTF"
fi
if use type1-fonts; then
G_FONTDIRS="${G_FONTDIRS} Type1"
fi
if use cjk; then
G_FONTDIRS="${G_FONTDIRS} CID"
fi
if use bitmap-fonts; then
G_FONTDIRS="${G_FONTDIRS} 75dpi 100dpi"
fi
if use nls; then
G_FONTDIRS="${G_FONTDIRS} cyrillic ukr"
fi
for G_FONTDIR in ${G_FONTDIRS}; do
# clean out old fonts.* and encodings.dir files, as we
# will regenerate them
# Not Speedo or CID, as their fonts.scale files are "real"
if [ "${G_FONTDIR}" != "CID" -a "${G_FONTDIR}" != "Speedo" ]; then
find ${ROOT}/usr/share/fonts/${G_FONTDIR} -type f -name 'fonts.*' \
-o -name 'encodings.dir' -exec rm -fv {} \;
fi
done
# Get rid of deprecated directories so our symlinks in the same location
# work -- users shouldn't be placing fonts here so that should be fine,
# they should be using ~/.fonts or /usr/share/fonts. <spyderous>
remove_font_dirs
}
remove_font_dirs() {
if [ -e ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts ]; then
if [ ! -L ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts ]; then
local G_FONTDIR
for G_FONTDIR in ${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts/*; do
if [ -L "${G_FONTDIR}" ]; then
einfo "Removing ${G_FONTDIR} symlink."
rm -rfv ${G_FONTDIR}
else
ewarn "${G_FONTDIR} not a symlink, moving to /usr/share/fonts"
if [ -d ${G_FONTDIR} ]; then
if [ ! -e /usr/share/fonts/${G_FONTDIR##*/} ]; then
einfo "Moving ${G_FONTDIR} to /usr/share/fonts/."
mv ${G_FONTDIR} /usr/share/fonts/
else
ewarn "/usr/share/fonts/${G_FONTDIR##*/} exists. Remove it and try again."
fi
else
ewarn "${G_FONTDIR} does not exist."
fi
fi
done
fi
else
ewarn "${ROOT}/usr/X11R6/$(get_libdir)/X11/fonts does not exist."
fi
}
move_app_defaults_to_etc() {
if [ -L ${ROOT}/etc/X11/app-defaults ]; then
rm -f ${ROOT}/etc/X11/app-defaults
fi
if [ ! -L ${ROOT}/usr/$(get_libdir)/app-defaults ] \
&& [ -d ${ROOT}/usr/$(get_libdir)/app-defaults ]; then
if [ ! -d ${ROOT}/etc/X11/app-defaults ]; then
mkdir -p ${ROOT}/etc/X11/app-defaults
fi
mv -f ${ROOT}/usr/$(get_libdir)/app-defaults ${ROOT}/etc/X11
fi
}
move_xkb_to_usr() {
if [ -L ${ROOT}/usr/$(get_libdir)/xkb ]; then
rm -f ${ROOT}/usr/$(get_libdir)/xkb
fi
if [ ! -L ${ROOT}/etc/X11/xkb ] \
&& [ -d ${ROOT}/etc/X11/xkb ]; then
if [ ! -d ${ROOT}/usr/$(get_libdir)/xkb ]; then
mkdir -p ${ROOT}/usr/$(get_libdir)
fi
mv -f ${ROOT}/etc/X11/xkb ${ROOT}/usr/$(get_libdir)
fi
}
dynamic_libgl_preinst() {
# clean the dynamic libGL stuff's home to ensure
# we don't have stale libs floating around
if [ -d ${ROOT}/usr/$(get_libdir)/opengl/${PN} ]; then
rm -rf ${ROOT}/usr/$(get_libdir)/opengl/${PN}/*
fi
# make sure we do not have any stale files lying around
# that could break things. Check old and new locations.
rm -f ${ROOT}/usr/X11R6/$(get_libdir)/libGL\.* \
${ROOT}/usr/$(get_libdir)/libGL\.*
}
##################
# pkg_postinst() #
##################
font_setup() {
umask 022
# These cause ttmkfdir to segfault :/
rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.8x.enc.gz
rm -f ${ROOT}/usr/share/fonts/encodings/iso8859-6.16.enc.gz
# rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-1.enc
# rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-2.enc
# rm -f ${ROOT}/usr/share/fonts/encodings/large/cns11643-3.enc
# rm -f ${ROOT}/usr/share/fonts/encodings/suneu-greek.enc
# ********************************************************************
# A note about fonts and needed files:
#
# 1) Create /usr/share/fonts/encodings/encodings.dir
#
# 2) Create fonts.scale for TrueType fonts (need to do this before
# we create fonts.dir files, else fonts.dir files will be
# invalid for TrueType fonts...)
#
# 3) Now Generate fonts.dir files.
#
# CID fonts is a bit more involved, but as we do not install any,
# thus I am not going to bother.
#
# <[email protected]> (20 Oct 2002)
#
# ********************************************************************
ebegin "Generating encodings.dir"
# Create the encodings.dir in /usr/share/fonts/encodings
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
${ROOT}/usr/bin/mkfontdir -n \
-e ${ROOT}/usr/share/fonts/encodings \
-e ${ROOT}/usr/share/fonts/encodings/large \
-- ${ROOT}/usr/share/fonts/encodings
eend 0
ebegin "Creating fonts.scale files"
local x
for x in $(find ${ROOT}/usr/share/fonts/* -maxdepth 1 -type d); do
[ -z "$(ls ${x}/)" ] && continue
[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
# Only generate .scale files if truetype, opentype or type1
# fonts are present ...
# First truetype (ttf,ttc)
# NOTE: ttmkfdir does NOT work on type1 fonts (#53753)
# Also, there is no way to regenerate Speedo/CID fonts.scale
# <[email protected]> 2 August 2004
if [ "${x/encodings}" = "${x}" -a \
-n "$(find ${x} -iname '*.tt[cf]' -print)" ]; then
if [ -x ${ROOT}/usr/bin/ttmkfdir ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
${ROOT}/usr/bin/ttmkfdir -x 2 \
-e ${ROOT}/usr/share/fonts/encodings/encodings.dir \
-o ${x}/fonts.scale -d ${x}
# ttmkfdir fails on some stuff, so try mkfontscale if it does
#下面是注销的几行
# local ttmkfdir_return=$?
else
# We didn't use ttmkfdir at all
local ttmkfdir_return=2
fi
# if [ ${ttmkfdir_return} -ne 0 ]; then
# LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
# ${ROOT}/usr/bin/mkfontscale \
# -a /usr/share/fonts/encodings/encodings.dir \
# -- ${x}
# fi
# Next type1 and opentype (pfa,pfb,otf,otc)
elif [ "${x/encodings}" = "${x}" -a \
-n "$(find ${x} -iname '*.[po][ft][abcf]' -print)" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
${ROOT}/usr/bin/mkfontscale \
-a ${ROOT}/usr/share/fonts/encodings/encodings.dir \
-- ${x}
fi
done
eend 0
ebegin "Generating fonts.dir files"
for x in $(find ${ROOT}/usr/share/fonts/* -maxdepth 1 -type d); do
[ -z "$(ls ${x}/)" ] && continue
[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
if [ "${x/encodings}" = "${x}" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
${ROOT}/usr/bin/mkfontdir \
-e ${ROOT}/usr/share/fonts/encodings \
-e ${ROOT}/usr/share/fonts/encodings/large \
-- ${x}
fi
done
eend 0
ebegin "Generating Xft cache"
for x in $(find ${ROOT}/usr/share/fonts/* -maxdepth 1 -type d); do
[ -z "$(ls ${x}/)" ] && continue
[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
# Only generate XftCache files if there are truetype
# fonts present ...
if [ "${x/encodings}" = "${x}" -a \
-n "$(find ${x} -iname '*.[otps][pft][cfad]' -print)" ]; then
LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/$(get_libdir)" \
${ROOT}/usr/bin/xftcache ${x} &> /dev/null
fi
done
eend 0
ebegin "Fixing permissions"
find ${ROOT}/usr/share/fonts/ -type f -name 'font.*' \
-exec chmod 0644 {} \;
eend 0
# danarmak found out that fc-cache should be run AFTER all the above
# stuff, as otherwise the cache is invalid, and has to be run again
# as root anyway
if [ -x ${ROOT}/usr/bin/fc-cache ]; then
ebegin "Creating FC font cache"
HOME="/root" ${ROOT}/usr/bin/fc-cache
eend 0
fi
}
switch_opengl_implem() {
# Switch to the xorg implementation.
# Use new opengl-update that will not reset user selected
# OpenGL interface ...
echo
local opengl_implem="$(${ROOT}/usr/sbin/opengl-update --get-implementation)"
${ROOT}/usr/sbin/opengl-update --use-old ${PN}
}
remove_old_compose_files() {
for x in $(find ${ROOT}/usr/$(get_libdir)/X11/locale/ -mindepth 1 -type d); do
# Remove old compose files we might have created incorrectly
# CJK must not have that file (otherwise XIM don't works some times)
case $(basename ${x}) in
ja*|ko*|zh*)
if [ -r "${x}/Compose" ]; then
rm -f ${x}/Compose
fi
;;
esac
done
}
setup_tmp_files() {
# These need to be owned by root and the correct permissions
# (bug #8281)
local x=""
for x in ${ROOT}/tmp/.{ICE,X11}-unix; do
if [ ! -d ${x} ]; then
mkdir -p ${x}
fi
chown root:wheel ${x}
chmod 1777 ${x}
done
}
print_info() {
echo
einfo "Please note that the xcursors are in /usr/share/cursors/${PN}."
einfo "Any custom cursor sets should be placed in that directory."
echo
einfo "If you wish to set system-wide default cursors, please create"
einfo "/usr/local/share/cursors/${PN}/default/index.theme"
einfo "with content: \"Inherits=theme_name\" so that future"
einfo "emerges will not overwrite those settings."
echo
einfo "Listening on TCP is disabled by default with startx."
einfo "To enable it, edit /usr/bin/startx."
echo
echo
ewarn "BEWARE:"
ewarn "/usr/X11R6/$(get_libdir) has MOVED"
ewarn "to /usr/$(get_libdir)"
ewarn "Run etc-update to update your config files."
ewarn "Old locations for anything in /usr/X11R6/$(get_libdir)"
ewarn "are deprecated."
echo
# (#76985)
einfo "Visit http://www.gentoo.org/doc/en/index.xml?catid=desktop"
einfo "for more information on configuring X."
# Try to get people to read /usr/X11R6/libdir move
ebeep 5
epause 10
}
fix_links() {
# Fix problematic links
if [ -x ${ROOT}/usr/bin/Xorg ]; then
ln -snf ../bin ${ROOT}/usr/bin/X11
fi
} |
|
IP卡
狗仔卡
发表于 2005-8-3 22:09:35
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
发表于 2005-8-3 22:20:05
