skyeye+uClinux,Clinux运行不了?

lin1010

我的系统fc3,装了skyeye +uClinux-dist
配置好了skyeye.conf,到输入run的时候就停了.
(SkyEye) target sim
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x8163b6c
SKYEYE: use arm7100 mmu ops
Loaded ROM romfs.img
Connected to the simulator.
(SkyEye) load
Loading section .init, size 0xa000 vma 0x1000000
Loading section .text, size 0xd4a30 vma 0x100a000
Loading section .data, size 0x9b20 vma 0x10e0000
Start address 0x1000000
Transfer rate: 7613056 bits in <1 sec.
(SkyEye) run
Starting program: /root/linux
sim_info called

Program received signal SIGINT, Interrupt.
setup_processor () at setup.c:147
147                     while (1);
(SkyEye)
怎么解决呀?

lin1010

怎么没有浏览一下，自己顶一下

chyyuu

你用skyeye－testsuit测试了吗？

lin1010

谢谢了。
我后来修改了skyeye.conf ,就可以。
我自己都没有搞明白。

cuizeshi

请问你是怎么修改skyeye.conf 的,能不能说一下,我现在也在自己编内核,总是跑不起来.