帮我看看是什么问题阿

sorryweb

我显示总是800x600的,字都好大个.我改了XF86Config都没有用,
下面是我改了的,大家帮我看看是怎么回事啊.

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     16
        SubSection "Display"
                Depth     16
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

月下刀客

显示器那段贴出来。要不你贴全了。

sorryweb

全贴下来了,帮我看看啊,如果我去掉1024x768后面的几种分辨率,那进xwindows时出错,
说的问题是 virtual height (0) is too small for hardware

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
# Or if you just want both to be control, use:
#        Option        "XkbOptions"        "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option            "XkbRules" "xfree86"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "Protocol" "IntelliMouse"
        Option            "Device" "/dev/ttyS0"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
        Identifier  "DevInputMice"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "UIS"
        HorizSync    31.5 - 37.9
        VertRefresh  50.0 - 70.0
        Option            "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nv"
        VendorName  "Videocard vendor"
        BoardName   "NVIDIA GeForce 2 MX (generic)"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     16
        SubSection "Display"
                Depth     16
                Modes    "1024x768"     "800x600"     "640x480"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection

lin1010

HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
修改为：
HorizSync 31.5-50
VertRefresh 50-100
...
...
Modes "1024x768" "800x600" "640x480"

我的以前也是只有800*600，改了以后就可以了；
我的显卡是集成的，系统是fc3.确认显示器支持。

月下刀客

17''CRT上这个应该是安全的：
[code:1]
HorizSync        30-71
VertRefresh     50-160
[/code:1]

sorryweb

终于好了,谢谢各位了.
还有,我已经驱动显卡了,那个"启动3D硬件加速"怎么还不能打开?

月下刀客

http://www.linuxfans.org/nuke/modules.php?name=Forums&file=viewtopic&t=132281