各位兄弟姐妹帮帮忙吧...求xf86config-4 ...

wind71120 · 发表于 2005-10-12 23:00:01

各位帮帮忙了，搞了好久始终没有装好debian...
最后终于把nvidia驱动装好，但是还是不能启动x windows
发觉还有个错误，screen 找不到 device之类的..
哪位dx能把在debian下的/etc/X11/XF86Congig-4详细显示望这里贴一下吗？？
麻烦大家帮帮忙了...谢谢
最好显卡也是nvidia的..

wind71120 · 发表于 2005-10-12 23:03:58

再问...显卡成功装好后除了要修改“module” load “Glore” 和 load “dri”外还要改些什么的吗？？

cnhnln · 发表于 2005-10-12 23:16:09

[code:1]
Section "Files"
# FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/local/share/fonts"
FontPath "/usr/lib/X11/fonts/misc"
# FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/CID"
# FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
# Load "GLcore"
# Load "bitmap"
Load "dbe"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
# Load "int10"
Load "record"
# Load "speedo"
# Load "type1"
# Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
 ### Available Driver options are:-
 ### Values: : integer, <f>: float, <bool>: "True"/"False",
 ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
 ### [arg]: arg optional
 Option "NvAGP" "3" # 
 Option "NoLogo" "True" # [<bool>]
 Option "RenderAccel" "True" # [<bool>]
 Option "NoRenderExtension" "False" # [<bool>]
 #Option "UBB" # [<bool>]
 #Option "NoFlip" # [<bool>]
 Option "DigitalVibrance" "85" # 
 #Option "Dac8Bit" # [<bool>]
 #Option "Overlay" # [<bool>]
 #Option "CIOverlay" # [<bool>]
 #Option "TransparentIndex" # 
 #Option "OverlayDefaultVisual" # [<bool>]
 Option "RandRRotation" "True" # [<bool>]
 Option "AllowDDCCI" "True" # [<bool>]
 Option "SWcursor" "False" # [<bool>]
 Option "HWcursor" "True" # [<bool>]
 Option "CursorShadow" "True" # [<bool>]
 Option "CursorShadowAlpha" "128" # 
 Option "CursorShadowXOffset" "6" # 
 Option "CursorShadowYOffset" "3" # 
 Option "ConnectedMonitor" "CRT" # <str>
 Option "UseEdidFreqs" "True" # [<bool>]
 Option "IgnoreEDID" "False" # [<bool>]
 Option "NoDDC" "False" # [<bool>]
 #Option "FlatPanelProperties" # <str>
 #Option "UseInt10Module" # [<bool>]
 #Option "TwinView" "True" # [<bool>]
 #Option "TwinViewOrientation" "RightOf" # <str>
 #Option "SecondMonitorHorizSync" "30-50" # <str>
 #Option "SecondMonitorVertRefresh" "60" # <str>
 #Option "MetaModes" "1024x768,800x600" # <str>
 #Option "NoTwinViewXineramaInfo" # [<bool>]
 #Option "TVStandard" "PAL-D" # <str>
 #Option "TVOutFormat" "SVIDEO" # <str>
 #Option "TVOverScan" # <f>
 #Option "Stereo" # 
 #Option "AllowDFPStereo" # [<bool>]
 #Option "NoBandWidthTest" # [<bool>]
 Option "IgnoreDisplayDevices" "DFP,TV" # <str>
 #Option "MultisampleCompatibility" # [<bool>]
 #Option "NoPowerConnectorCheck" # [<bool>]
 Option "XvMCUsesTextures" "True" # [<bool>]
 Option "AllowGLXWithComposite" "True" # [<bool>]
 #Option "ExactModeTimingsDVI" # [<bool>]
 Option "Coolbits" "1" # 
 Option "LoadKernelModule" "True" # [<bool>]
####################################################################
 #Option "VideoKey" # 
 #Option "ConnectedMonitors" # <str>
 #Option "ForceEmulatedOverlay" # [<bool>]
 #Option "NvEmulate" # 
 #Option "CustomEDID-CRT-0" # <str>
 #Option "CustomEDID-CRT-1" # <str>
 #Option "CustomEDID-DFP-0" # <str>
 #Option "CustomEDID-DFP-1" # <str>
 #Option "CustomEDID-TV-0" # <str>
 #Option "CustomEDID-TV-1" # <str>
 #Option "RegistryDwords" # <str>
 #Option "RegistryBinary" # <str>
 #Option "HorizSync" # <str>
 #Option "VertRefresh" # <str>
 #Option "ConstantFrameRateHint" # [<bool>]
 #Option "ClearCube" # [<bool>]
 #Option "PredefinedTimings" # 
 #Option "EmulatedOverlaysTimerMs" # 
Identifier "NVIDIA Corporation NV34 [GeForce FX 5200]"
Driver "nvidia"
# VideoRam 32768
VendorName "nVidia Corporation"
BoardName "NV34 [GeForce FX 5200]"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-61
VertRefresh 50-120
Option "DPMS"
#Option "OffTime" "20"
#Option "StandbyTime" "20"
#Option "SuspendTime" "20"
# Modeline "1024x768" 78.80 1024 1056 1152 1312 768 769 772 800 +hsync +vsync
Gamma 1.60 1.60 1.60 # created by KGamma
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34 [GeForce FX 5200]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
[/code:1]

wind71120 · 发表于 2005-10-12 23:19:01

刚刚搞掂
不过仍然要谢谢你 :D

wind71120 · 发表于 2005-10-12 23:20:16

第一次装debian...
弄了半天,呵呵

hejux · 发表于 2005-10-13 09:26:56

3n的

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-61
VertRefresh 50-120

你怎么是30-61 50-120 ？这么低啊？

cnhnln · 发表于 2005-10-13 12:54:17

99年的15#，能不低嘛

积木 · 发表于 2005-10-13 13:31:13

赶紧换了把，还用啊。

cnhnln · 发表于 2005-10-13 23:03:37

赞助也行，施舍也行，给点￥我就换

		自动登录	找回密码
密码			注册