已安了gstreamer-0.8.11安gst-plu

adsl9999

我是FC5t1 totem 1.2 基于gstreamer-0.8.11
安了gstreamer-0.8.11成功
[root@localhost ~]# whereis gstreamer-0.8.11
gstreamer-0.8: /usr/lib/gstreamer-0.8 /usr/local/lib/gstreamer-0.8
安gst-plugins-0.8.11却找不到gstreamer-0.8.11
[root@localhost gst-plugins-0.8.11]# ./configure
。。。。。。。。。。。。。。
checking for gstreamer-0.8 >= 0.8.9.1... configure: error: no GStreamer found
请指教
是不是两个都要./configure-prefix=PATH
PATH应是哪里？

adsl9999

make[3]: Leaving directory `/root/gstreamer-0.8.11/docs/libs'
make[2]: Leaving directory `/root/gstreamer-0.8.11/docs/libs'
make[2]: Entering directory `/root/gstreamer-0.8.11/docs'
make[3]: Entering directory `/root/gstreamer-0.8.11/docs'
make[3]: Nothing to be done for `install-exec-am'.
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/root/gstreamer-0.8.11/docs'
make[2]: Leaving directory `/root/gstreamer-0.8.11/docs'
make[1]: Leaving directory `/root/gstreamer-0.8.11/docs'
make[1]: Entering directory `/root/gstreamer-0.8.11'
make[2]: Entering directory `/root/gstreamer-0.8.11'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/local/share/aclocal" || mkdir -p -- "/usr/local/share/aclocal"
/usr/bin/install -c -m 644 'gst-element-check-0.8.m4' '/usr/local/share/aclocal/gst-element-check-0.8.m4'
make[2]: Leaving directory `/root/gstreamer-0.8.11'
make[1]: Leaving directory `/root/gstreamer-0.8.11'
[root@localhost gstreamer-0.8.11]#

mandrakechina

为什么要自己编译？用yum安装不是很方便么？

yangh

楼主是不是已经安装好啦？ :neutral:

adsl9999

gstreamer-0.8.11可能好了，不能确定．gst-plugins-0.8.11肯定没安好
./configure通不过
[root@localhost gst-plugins-0.8.11]# ./configure
。。。。。。。。。。。。。。
checking for gstreamer-0.8 >= 0.8.9.1... configure: error: no GStreamer found

是不是两个都要./configure　-prefix=PATH
PATH应是哪里？
记得以前FC3安alsa时同样问题，后来指定./configure路径后解决了
我就是不知道应把./configure路径指定到哪里？
我很想试一下这个方法
yum我这不行．

cobranail

做成rpm包再装，虽然稍微麻烦一点，不过以后升级和卸载就方便多了