|
|
[root@localhost ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:2E:C8:5C
inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:236 errors:0 dropped:0 overruns:0 frame:0
TX packets:165 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:28896 (28.2 Kb) TX bytes:16388 (16.0 Kb)
Interrupt:10 Base address:0x10a4
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:38744 errors:0 dropped:0 overruns:0 frame:0
TX packets:38744 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2650698 (2.5 Mb) TX bytes:2650698 (2.5 Mb)
tap0 Link encap:Ethernet HWaddr FE:FD:00:00:00:00
inet addr:10.0.0.1 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:200 (200.0 b)
Interrupt:5
[root@localhost ~]# skyeye -e linux
skyeye: Command not found.
[root@localhost ~]# ./skyeye -e linux
------------------------- SkyEye -V1.2 ---------------------------
Usage: SkyEye [options] program [program args]
Default mode is STANDALONE mode
------------------------------------------------------------------
Options:
-e exec-file the (ELF executable format)kernel file name.
-d in GDB Server mode (can be connected by GDB).
-c config-file the skyeye configure file name.
-h This Help Display
-v This shows arch and cpu supported
------------------------------------------------------------------
debugmode= 0, filename = (null), server TCP port is 12345
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x8072878
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
can't find device module: (null)
SKYEYE: use arm7100 mmu ops
Loaded ROM ./romfs.img
exec file "linux"'s format is elf32-little.
load section .init: addr = 0x01000000 size = 0x0000a000.
load section .text: addr = 0x0100a000 size = 0x000cffc0.
load section .data: addr = 0x010da000 size = 0x00009154.
not load section .bss: addr = 0x010e3160 size = 0x00022954 .
not load section .debug_abbrev: addr = 0x00000000 size = 0x0003c105 .
not load section .debug_info: addr = 0x00000000 size = 0x017c4c4d .
not load section .debug_line: addr = 0x00000000 size = 0x002eb25a .
not load section .debug_pubnames: addr = 0x00000000 size = 0x0000b97a .
not load section .debug_aranges: addr = 0x00000000 size = 0x000023a0 .
start addr is set to 0x01000000 by exec file.
Linux version 2.4.20-uc0 ([email protected]) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #1 Áù 1ÔÂ 14 13:53:03 CST 2006
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 12.97 BogoMIPS
Memory: 4MB = 4MB total
Memory: 2992KB available (831K code, 174K data, 40K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-1507BFF [VIRTUAL 1400000-1507BFF] (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
SkyEye NE2k Ethernet driver version 0.2 (2003-04-27)
sene2k dev name: eth0: <6>NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: /etc/rc
Command: hostname GDB-ARMulator
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: mount -t proc proc /proc
mount: /etc/mtab: Read-only file system
Command: mount -t ext2 /dev/ram0 /var
mount: /etc/mtab: Read-only file system
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: cat /etc/motd
Welcome to
____ _ _
/ __| ||_|
_ _| | | | _ ____ _ _ _ _
| | | | | | || | _ \| | | |\ \/ /
| |_| | |__| || | | | | |_| |/ \
| ___\____|_||_|_| |_|\____|\_/\_/
| |
|_|
GDB/ARMulator support by <[email protected]>
For further information check:
http://www.uclinux.org/
Command: /bin/ifconfig eth0 up 10.0.0.2
Execution Finished, Exiting
Sash command shell (version 1.1.1)
/> /bin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:10.0.0.2 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 iB) TX bytes:0 (0.0 iB)
Interrupt:16
uclinux 和宿主机 互相ping不通， MAC地址比较奇怪，和配置文件中的不符 |
|
IP卡
狗仔卡
发表于 2006-1-18 22:09:56
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡