x时好时坏，到底怎么了啊？

ww2000e · 发表于 2006-5-26 18:11:49

redhat9，偶尔能启动一下x，现在总是提示，怎么配置xf86config都没用

(WW) NV: No matching Device section for instance (BusID PCI:1:0:0) found
(EE) No devices detected.
Fatal server error:
no screens found

还有
XIO:fatal IO error 104 (connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining

原来用一直好好的啊，到底怎么了

bluebinary · 发表于 2006-5-26 22:00:27

显卡驱动问题，

ww2000e · 发表于 2006-5-27 13:15:34

那我该怎么办？
redhat-config-xfree86也式了
安驱动也成功了
xf86config不知道配置了多少次
式了各种各样方法 :-( 就是不行

bluebinary · 发表于 2006-5-27 15:14:14

[quote:601ff05fb7="ww2000e"]那我该怎么办？
redhat-config-xfree86也式了
安驱动也成功了
xf86config不知道配置了多少次
式了各种各样方法 :-( 就是不行[/quote]

最近NV好像有新驱动了，可以去下来试试，

实在不行你先用vesa驱动吧，以后再想办法解决 :D

ww2000e · 发表于 2006-5-28 16:38:04

我就是把"nv" 改成 vesa的不行啊

bluebinary · 发表于 2006-5-28 18:46:37

把配置文件贴出来让大家看看，

ww2000e · 发表于 2006-5-28 21:08:51

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "未探测过的显示器"
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 60.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "RIVA TNT2"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

hillwood · 发表于 2006-5-28 22:04:03

装个驱动就解决了。

ww2000e · 发表于 2006-5-29 17:39:10

装了

而且成功了

昨天开机又好了

我注销换用户又启动不了了

我快疯了

ww2000e · 发表于 2006-5-30 15:05:09

我终于彻底修复了

用X -configure
命令生成了xfr86config.new文件改成 xfr86config考到/etc/X11/下就行了
驱动也能用了
不过按ctrl+alt+f1进控制台时是花屏

		自动登录	找回密码
密码			注册