有谁安装skyeye+uclinux时遇到以下情况(求指点)

shengcheng

[root@localhost uClinux-dist]# skyeye -e linux-2.4.x/linux
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x807293c
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
can't find device module: (null)
SKYEYE: use arm7100 mmu ops
Loaded ROM   images/image.bin
exec file "linux-2.4.x/linux"'s format is elf32-little.
load section .init: addr = 0x01000000  size = 0x00009000.
load section .text: addr = 0x01009000  size = 0x000cdc08.
load section .data: addr = 0x010d8000  size = 0x000081b4.
not load section .bss: addr = 0x010e01c0  size = 0x00020a18 .
not load section .debug_abbrev: addr = 0x00000000  size = 0x000393b3 .
not load section .debug_info: addr = 0x00000000  size = 0x0167ba4e .
not load section .debug_line: addr = 0x00000000  size = 0x002d1bec .
not load section .ebug_pubnames: addr = 0x00000000  size = 0x0000b3b1 .
not load section .debug_aranges: addr = 0x00000000  size = 0x00002280 .
start addr is set to 0x01000000 by exec file.
Linux version 2.4.17-uc0 ([email protected]) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #1 一 6月 5 10:00:58 CST 2006
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 13.00 BogoMIPS
Memory: 4MB = 4MB total
Memory: 2992KB available (823K code, 167K data, 36K init)
Dentry-cache hash table entries: 512 (order: 0, 4096 bytes)
Inode-cache hash table entries: 512 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 4000000-3FFFFFF [VIRTUAL 4000000-3FFFFFF] (RO)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Blkmem: bad access: block=2, count=2 (pos=800, len=0)
end_request: I/O error, dev 1f:00 (Blkmem), sector 2
EXT2-fs: unable to read superblock
Blkmem: bad access: block=0, count=2 (pos=400, len=0)
end_request: I/O error, dev 1f:00 (Blkmem), sector 0
romfs: unable to read superblock
Kernel panic: VFS: Unable to mount root fs on 1f:00



.................................................................................................
百度一下在立宇泰嵌入式系统技术论坛有人说是rh9不支持romfs文件系统了,不知道到底是不是 ,应该如何解决呢 ?

shengcheng

。。。。很困惑啊

shengcheng

为什么没有高手指点一下的。。

ksh

文件系统有问题。。。你先试一下SkyEye中的testcase

shengcheng

斑竹可不可以具体一点？好像很多人都存在这样的问题，是操作系统不支持romfs还是skyeye的io出了问题。

shengcheng

安装成功了  谢谢版主了 ..........

cuizeshi

改动了什么才成功的？能详细的说一下吗？
我最近也在自己编译内核，总是有问题．
请楼主介绍一下经验，谢了！