高手指点一下可以吗？

tyronline

最近做linux2.6.9的内核“搬迁”工作，目标板是S3C44B0的板子，常州的那个！现在“搬迁”完毕，启动后，结果如下：
## Starting application at 0x0c008000 ...
Linux version 2.6.9-hsc0 ([email protected]) (gcc version 3.4.0) #3 Wed
Aug 2 17:26:30 CST 2006
CPU: Samsung-S3C44B0x [44b07700] revision 0 (ARMv4T)
Machine: S3C44B0X Development Board
Built 1 zonelists
Kernel command line: root=/dev/ram0 initrd=0x0c115f48,445k keepinitrd
PID hash table entries: 64 (order: 6, 1024 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 8MB = 8MB total
Memory: 6436KB available (1472K code, 117K data, 52K init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
NET: Registered protocol family 16
init_module
Samsung S3C44B0 Rtl8019as driver version 0.1 (2002-02-20) <[email protected]>
init
eth0: 12:34:56:78:90:ab
get_stats
RAMDISK driver initialized: 16 RAM disks of 2048K size 1024 blocksize
loop: loaded (max 8 devices)
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: romfs filesystem found at block 0
RAMDISK: Loading 445KiB [1 disk] into ram disk... done.
VFS: Mounted root (romfs filesystem) readonly.
Freeing init memory: 52K
Warning: unable to open an initial console.
open
enable_irq(22) unbalanced from 0c01d994这里包括后面的一大堆乱七八糟的东西是不是因为CONSOLE没有打开造成的？
get_stats
get_stats
start_xmit

Tx Length = 590,8,0
FF,FF,FF,FF,FF,FF,12,34,56,78,90,AB, 8, 0,45, 0, 2,40, 0, 0, 0, 0,40,11,78,AE, 0
, 0, 0, 0,FF,FF,FF,FF, 0,44, 0,43, 2,2C,57,91, 1, 1, 6, 0,67,45,8B,6B, 0, 3, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,12,34,56,78,90,AB, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,63,82,53,63,35, 1, 1,39, 2, 2,24,33, 4,FF,FF,F
F,FF,37, E, 1, 3, 6, C, F,11,17,1C,1D,1F,21,28,29,2A,3C,17,4C,69,6E,75,78,20,32,
F,FF,37, E, 1, 3, 6, C, F,11,17,1C,1D,1F,21,28,29,2A,3C,17,4C,69,6E,75,78,20,32,
, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
望大侠们指点一二     

tyronline

这个也自己解决吧，增加串口驱动问题得以解决！