[求助]移动硬盘无法使用，dmesg 有错误信息

寻星

我的系统为 Debian etch，内核为2.6.18-4-amd64，机器为ThinkPad T60。移动硬盘是三星120G的，分了三个区，均为NTFS格式。

当我把移动硬盘接上后 /dev 下只有一个 sdb，看不见分区，fidsk -l /dev/sdb 什么信息都得不到。查看 dmesg 信息，发现系统已经认出了我的三星硬盘

1. 
   
2. scsi6 : SCSI emulation for USB Mass Storage devices
   
3. usb-storage: device found at 6
   
4. usb-storage: waiting for device to settle before scanning
   
5.   Vendor: SAMSUNG   Model: HM120JC           Rev:  0 0
   
6.   Type:   Direct-Access                      ANSI SCSI revision: 00
   
7. SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
   
8. sdb: Write Protect is off
   
9. sdb: Mode Sense: 03 00 00 00
   
10. sdb: assuming drive cache: write through
    
11. SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
    
12. sdb: Write Protect is off
    
13. sdb: Mode Sense: 03 00 00 00
    
14. sdb: assuming drive cache: write through
    

复制代码

但紧接着出现一堆错误信息：

1. 
   
2. sdb:<6>sd 6:0:0:0: SCSI error: return code = 0x10070000
   
3. end_request: I/O error, dev sdb, sector 0
   
4. printk: 10 messages suppressed.
   
5. Buffer I/O error on device sdb, logical block 0
   
6. sd 6:0:0:0: SCSI error: return code = 0x10070000
   
7. end_request: I/O error, dev sdb, sector 0
   
8. Buffer I/O error on device sdb, logical block 0
   
9. unable to read partition table
   
10. sd 6:0:0:0: Attached scsi disk sdb
    
11. usb-storage: device scan complete
    
12. sd 6:0:0:0: SCSI error: return code = 0x10070000
    
13. end_request: I/O error, dev sdb, sector 234441472
    
14. Buffer I/O error on device sdb, logical block 29305184
    
15. sd 6:0:0:0: SCSI error: return code = 0x10070000
    
16. end_request: I/O error, dev sdb, sector 234441472
    
17. 
    
18. ...
    
19. 
    
20. sd 6:0:0:0: SCSI error: return code = 0x10070000
    
21. end_request: I/O error, dev sdb, sector 0
    
22. sd 6:0:0:0: SCSI error: return code = 0x10070000
    
23. end_request: I/O error, dev sdb, sector 0
    
24. sd 6:0:0:0: SCSI error: return code = 0x10070000
    
25. 
    
26. ...
    

复制代码

因为我朋友的移动硬盘也是三星的，同样为NTFS格式。在我这里就可以正确识别并挂载。所以实在不知道是什么原因导致的。请各位朋友指教。