用skyeye1.2.4模拟AT91sam9263的问题

qq425887742

代码如下：
[root@www test]# /root/skyeye-1.2.4/binary/skyeye -e vmlinux1 -c skyeye.conf
big_endian is false.
arch: arm
cpu info: armv5, arm926ejs, 41069260, ff0ffff0, 2
mach info: name at91rm92, mach_init addr 0x805a9b0
uart_mod:1, desc_in:/dev/tty1, desc_out:/dev/tty1, converter:
log_info: log is off.
log_info:log file is /tmp/sk.log, fd is 0x956c228
log_info: log start clock 100000
log_info: log end clock 200000
SKYEYE: use arm926ejs mmu ops
Loaded RAM   ./initrd
start addr is set to 0xc0000000 by exec file.

到此就停止不前了，恳请高手指点！！
linux内核:2.6.20+2.6.20-at91.patch.gz
文件系统采用busybox1.0.0制作，
内核配置采用at91sam9263ek_defconfig缺省配置
skyeye配置文件如下（自己编写）：
cpu:arm926ejs
mach:at91rm92
mem_bank: map=M, type=RW, addr=0x00000000, size=0x00600000
mem_bank: map=M, type=RW, addr=0x00700000, size=0x00200000
mem_bank: map=M, type=RW, addr=0x00a00000, size=0x00100000
mem_bank: map=M, type=RW, addr=0x20000000, size=0x00200000 ,file=./initrd
mem_bank: map=M, type=RW, addr=0xc0000000, size=0x00400000
mem_bank: map=M, type=RW, addr=0xe0000000, size=0x00400000
uart: fd_in=/dev/tty1, fd_out=/dev/tty1
log: logon=0, logfile=/tmp/sk.log, start=100000, end=200000

恳请帮忙，这是哪方面的原因？谢谢！

fengjl026

串口写不出东西来？console参数增加了吗？

qq425887742

参数添加了console=ttyS0,115200

duzhig

不要打patch有的patch使用的是skyeye不支持的PDC方式传输

qq425887742

The problem has been solved.I changed a linux kernel like linux2.6.20.20
                                                                                Thanks for above help!