|
|
发表于 2009-4-5 16:49:31
|
显示全部楼层
测试了一下，在skyeye-1.2.6上可以运行。skyeye-1.2.7_rc1不行。运行如下：
/ $ server:/opt/testsuite/linux/cs8900/build-2.6.14 # /home/ksh/cvs/skyeye/skyeye-v1nches/skyeye-1.2.6/skyeye -e vmlinux
Your elf file is little endian.
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name s3c2410x, mach_init addr 0x424540
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
lcd_mod:1
Your elf file will be load to: base address=0x30000000,mask=0xffffff
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm920t mmu ops
Loaded RAM ./initrd.img
exec file "vmlinux"'s format is elf32-little.
load section .init: addr = 0xc0008000 size = 0x0001b000.
load section .text: addr = 0xc0023000 size = 0x0021a018.
not load section .pci_fixup: addr = 0xc023d018 size = 0x00000000 .
load section __ksymtab: addr = 0xc023d018 size = 0x00003e50.
load section __ksymtab_gpl: addr = 0xc0240e68 size = 0x00000840.
not load section __kcrctab: addr = 0xc02416a8 size = 0x00000000 .
not load section __kcrctab_gpl: addr = 0xc02416a8 size = 0x00000000 .
load section __ksymtab_strings: addr = 0xc02416a8 size = 0x00009e18.
load section __param: addr = 0xc024b4c0 size = 0x00000384.
load section .data: addr = 0xc024c000 size = 0x00050760.
not load section .bss: addr = 0xc029c760 size = 0x00023bc4 .
not load section .comment: addr = 0x00000000 size = 0x000025f8 .
not load section .debug_abbrev: addr = 0x00000000 size = 0x0008c1cd .
not load section .debug_info: addr = 0x00000000 size = 0x01794ff0 .
not load section .debug_line: addr = 0x00000000 size = 0x0015e093 .
not load section .debug_pubnames: addr = 0x00000000 size = 0x00018cea .
not load section .debug_str: addr = 0x00000000 size = 0x0007ac31 .
not load section .debug_aranges: addr = 0x00000000 size = 0x00005470 .
not load section .debug_frame: addr = 0x00000000 size = 0x0006c100 .
not load section .debug_ranges: addr = 0x00000000 size = 0x0000e9d0 .
call ARMul_InitSymTable,kernel filename is vmlinux.
start addr is set to 0x30008000 by exec file.
Linux version 2.6.14 (ksh@server) (gcc version 3.3.6) #4 Fri May 2 00:22:41 CST 2008
CPU: ARM920Tid(wb) [41009200] revision 0 (ARMvundefined/unknown)
Machine: SMDK2410
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
CPU S3C2410 (id 0x32410000)
S3C2410: core 62.400 MHz, memory 62.400 MHz, peripheral 62.400 MHz
S3C2410 Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists
Kernel command line: mem=32M console=ttySAC0 root=/dev/ram initrd=0x30800000,0x00800000 ramdisk_size=2048 rw
PID hash table entries: 256 (order: 8, 4096 bytes)
timer tcon=00000000, tcnt cb1f, tcfg 00000200,00000000, usec 0000189e
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 21376KB available (2210K code, 464K data, 108K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
softlockup thread 0 started up.
Freeing initrd memory: 8192K
NET: Registered protocol family 16
S3C2410: Initialising architecture
S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics
DMA channel 0 at c2800000, irq 33
DMA channel 1 at c2800040, irq 34
DMA channel 2 at c2800080, irq 35
DMA channel 3 at c28000c0, irq 36
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
lp: driver loaded but no devices found
S3C2410 RTC, (c) 2004 Simtec Electronics
ppdev: user-space parallel port driver
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410
s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410
s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 2048K size 1024 blocksize
loop: loaded (max 8 devices)
Cirrus Logic CS8900A driver for Linux (Modified for SMDK2410)
eth0: CS8900A rev D at 0xe0000300 irq=53, no eeprom , addr: 08: 0:3E:26:0A:5B
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
BAST NOR-Flash Driver, (c) 2004 Simtec Electronics
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
mice: PS/2 mouse device common for all mice
ERROR: s3c2410x_io_write_word(0x5400000 = 0x00000010
s3c2410-i2c s3c2410-i2c: slave address 0x10
s3c2410-i2c s3c2410-i2c: bus frequency set to 390 KHz
ERROR: s3c2410x_io_write_word(0x54000000) = 0x000000a9
s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 204
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2048KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 108K
init started: BusyBox v1.4.1 (2007-02-10 01:19:06 CST) multi-call binary
Starting pid 25, console /dev/console: '/etc/init.d/rcS'
Welcome to
_ _____ __ __ _ _
/ \ / __ \ / \_/ \ | | |_|
/ _ \ | | | | / /\ /\ \ | | _ ____ _ _ _ _
/ /_\ \ | |__| | / / \_/ \ \| | | | _ \| | | |\ \/ /
/ /___\ \ | |__\ \ | | | || |___ | | |_| | |_| |/ \
/_/ \_\| | \_\|_| |_||_____||_|_| |_|\____|\_/\_/
ARMLinux for Skyeye
For further information please check:
http://www.skyeye.org/
BusyBox v1.4.1 (2007-02-10 01:19:06 CST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/ash: can't access tty; job control turned off
/ $ ifconfig eth0 10.0.0.2
/ $ ping -c 1 10.0.0.1
PING 10.0.0.1 (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=9.9 ms
--- 10.0.0.1 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 9.9/9.9/9.9 ms
/ $ |
|
IP卡
狗仔卡
发表于 2009-3-31 19:01:24
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡