skyey1.2.6+ucLinux

lsp2009

系统：Redhat 9.0
skyeye1.2.6

运行 cat skyeye.conf
cpu:  arm920t
mach: s3c2440

#physical memory
#mem_bank: map=M, type=RW, addr=0x20000000, size=0x01000000
mem_bank: map=M, type=RW, addr=0x30000000, size=0x00800000
mem_bank: map=M, type=RW, addr=0x30800000, size=0x00800000, file=fs.img
mem_bank: map=M, type=RW, addr=0x31000000, size=0x01000000
#all peripherals I/O mapping area
#mem_bank: map=I, type=RW, addr=0xfefa0000, size=0x00060000
mem_bank: map=I, type=RW, addr=0x48000000, size=0x20000000
mem_bank: map=I, type=RW, addr=0x19000300, size=0x00000020
#net: type=cs8900a, base=0x19000300, size=0x20,int=9, mac=0:4:3:2:1:f, ethmod=tuntap, hostip=10.0.0.1
lcd:type=s3c2440,mod=gtk
load_addr:base=0x30000000, mask=0xFFFFFF
#dbct:state=on
[root@localhost s3c2440]# skyeye -c skyeye.conf -e linux
Your elf file is little endian.
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name s3c2440, mach_init addr 0x80710f0
lcd_mod:1
Your elf file will be load to: base address=0x30000000,mask=0xffffff
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm920t mmu ops
Loaded RAM   ./romfs.img
exec file "linux"'s format is elf32-little.
load section .init: addr = 0x01000000  size = 0x0000a000.
load section .text: addr = 0x0100a000  size = 0x000d5020.
。。
SKYEYE:Error in mem_read_word, no bank found, NumInstrs 113196, mem_read_word addr = 8aac no bank
SKYEYE:Error in mem_read_word, no bank found, NumInstrs 113196, mem_read_word addr = 8ab0 no bank
SKYEYE:Error in mem_read_word, no bank found, NumInstrs 113196, mem_read_word addr = 8ab4 no bank

ksh

你可以先尝试一下skyeye + at91 + uClinux