测试skyeye-testsuite-1.3.2/linux/s3c2410时出错

grubxy

本人新手，测试时
(skyeye)start
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
In do_mach_option, mach info: name s3c2410x, mach_init addr 0x677ae50

ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
failed to setup_module (name:net, type:cs8900a)
tapif_init: icotl TUNSETIFF errorlcd_mod:1
uart_mod:0, desc_in:, desc_out:, converter:
do_load_addr_option not finished.
do_load_file_option not finished.
SKYEYE: use arm920t mmu ops
exec file "vmlinux"'s format is elf32-i386.
load section .init: addr = 0xc0108000  size = 0x00027e7c.
load section .text: addr = 0xc0130000  size = 0x003b7fa4.
load section __ksymtab: addr = 0xc04e8000  size = 0x000057c8.
load section __ksymtab_gpl: addr = 0xc04ed7c8  size = 0x00002ef8.
load section __ksymtab_strings: addr = 0xc04f06c0  size = 0x00012af6.
load section __param: addr = 0xc05031b8  size = 0x00000e48.
load section .data: addr = 0xc0504000  size = 0x00029140.
load section .data..shared_aligned: addr = 0xc052d140  size = 0x00000080.
not load section .bss: addr = 0xc052d1c0  size = 0x0002e368 .
not load section .comment: addr = 0x00000000  size = 0x000045c0 .
In SIM_start, Set PC to the address 0x30108000

In load_file, Load the file ./initrd.img to the memory 0x30800000

(skyeye)
光标卡住了，不能继续输入

ksh

请问什么环境？
另外你的那个输出为什么是
In SIM_start, Set PC to the address 0x30108000
应该是0x30008000

Thanks
MK

grubxy

您好，是Fedora13,我是初学。

grubxy

您好，我又试了下，发现加 -n参数可以顺利运行了，但是不加 -n就卡住了。