AC97声卡中readme文件的操作步骤？

rsea

驱动845G板载AC97声卡，下载了for linux的驱动，其中readme文件如下：
Step 1. You must have full configured source for the Linux kernel.

Step 2. Uncompress the source code

        a. tar xfvj alcsound.tar.bz2
        or        b. unbzip2 alcsound.tar.bz2
                        tar -xvf alcsound.tar
Step 3. Turn on sound support (soundcore module)我对这步不理解，在哪里打开声音设备啊？

Step 4. Complied source code
        a. ./Configure  
        b. make install   
        c. ./snddevices /(还有这里具体怎么操作呢？是在什么目录下执行?直接敲以上命令吗?)

Step 5. Edit your /etc/modules.conf or conf.modules depending on the Distribution(分类)
        (Please refer to the attached modules.conf)

Step 6. reboot your machine
Note:         1. The most detail information, can refer the INSTALL file in the alcsound.tar.bz2.
        2. Kernel Version must be 2.2.14 or later.
        3. All mixer channels are muted by default. You must use a native
                or OSS mixer program to unmute appropriate channels.
        4. If can not compile the source code, try to rename the /usr/src/linux-2.x -> /usr/src/linux.
        5. The driver added to support the SPDIF functoin.        
请大家多多指教！！
下面是上文提到的modules.conf
alias parport_lowlevel parport_pc
alias usb-controller usb-uhci
#alias sound-slot-0 via82cxxx_audio        //remark this line, this is default audio driver

#====== added those lines =============
alias char-major-116 snd
options snd major=116 cards_limit=1

#--- Intel 8x0  and SiS 7012 ----------
alias snd-card-0 snd-intel8x0
options snd-intel8x0 index=0 id="ICH"
#--- Via8233  and Via686A/B -------------------
#alias snd-card-0 snd-via82xx
#options snd-via82xx index=0 id="VIA"
#------------------------------------------------------

alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
#=================================
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :

llc

Step 3. Turn on sound support (soundcore module)我对这步不理解，在哪里打开声音设备啊？

这步是指内核打开sound card支持,一般默认的内核都选上了

rsea

OK！收到！非常感谢！
不过第四步的./Configure和/snddevices要在什么目录里面操作啊？我在解完压缩后直接敲Configure 好象不对。谢谢！

Dragonfly

u need enter the dir u uncompress, and run ./configure.
pls read other doc on how to install a software from source code to know more.

rsea

终端显示基本如下：
$:tar xfvj alcsound.tar.bz2
alsa-driver-0.9.Orc5/
alsa-driver-0.9.Orc5/acore/
alsa-driver-0.9.Orc5//acore/ioctl32
......
alsa-driver-0.9.Orc5//toplevel.config
tar:alsa-driver-0.9.Orc5/include/linux/isapnp.h:cannot create symlink not permitted
tar:Error exit delayed from previous errors
1.请问我怎么才能知道把这些文件解到哪了呢？
2.错误是怎么回事？
谢谢！

llc

请将压缩包移动到linux分区再解压

rsea

收到！thanks

rsea

果然如此！确实在ect/下发现了/modules.conf
不过Step 5. Edit your /etc/modules.conf or conf.modules depending on the Distribution，我怎么编辑它啊？还让我参考它附带的modules文件。怎么操作呢？我的是集成AC97声卡。

rsea

以下是我的/etc/modules.conf 现在的原文，希望能对大虾了解小弟病情有所帮助：
pre-install pcmcia-core CARDMGR_OPTS=-1/etc/rc.d/init.d/pcmcia start
alias eth0 8139too
alias usb-interface usb-uhci
alias usb-interface1 usb-ohci
最楼上的那篇modules.conf是驱动所说让我参考的附带modules.conf文件
再次对浏览小弟帖子的表示感谢