|
|
新装了REDHAT9后,遇到了一些问题,这几天都在和ADSL不能上网的事情折腾,终于搞定,所以安心写下这些,作为REDHAT9使用者的参考:
Grub
安装过程中基本上和8没有区别,我在选择GRUB安装位置时,没有选择MBR,所以WINDOWS2000
SERVER起动菜单中没有LINUX,所以,我用安装光盘起动,进入linux rescue模式,一系列键盘以及几项简单的配制，
过后就［继续］了,这个过程，我不说了，比较简单。
然后会出现这样的字符
sh#,输入 GRUB,等待一段长的时间--不要以为是死机,
grub>root (hdX,Y)
grub>setup (hd0)
如果成功会有一个successful...... 其中,X代表你的硬盘,如果是一个盘，就是0,如果是第二个的根分区,就是1拉
Y，就是装有linux系统所在的根分区,如果不知道Y的数字,可以输入ROOT (HDX,然后TAB,可以从列表中选取,setup (hd0)就是把GRUB写到硬盘的MBR上。
然后就是RESET,看到了什么?哈哈,这个方法同样适合重新安装WINDOWS后起动菜单不见的情况!
其次就是汉化了,我用了FOR 8的汉化包,暂时没有出现不好的状况!
REDHAT9上ADSL最终解决方案!
在LINUXSIR和LINUXFANS上看了很多关于ADSL的文章,都没有解决我的REDHAT9上ADSL上网的问题,今天实在是没有办法,重新建立连接,曲折的经历,终于上网了(非常激动,可能表达的不是很好),特的写下我的过程,作为参考:
REDHAT默认的PPPOE有问题,需要RPM -E,然后,安装这个
http://www.roaringpenguin.com/pppoe/rp-pppoe-3.5.tar.gz(北南兄推荐)
解压和安装：
#tar zxvf rp-pppoe-3.5.tar.gz
进入解压目录执行
#sh ./go
然后再来设置ADSL。这一处，我们要用命令。
#adsl-setup
Welcome to the Roaring Penguin ADSL client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...
Looks good! Now, please enter some information:
USER NAME
>>> Enter your PPPoE user name (default XXX): 在这里输入ADSL的用户名
INTERFACE
>>> Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):如果一张网卡就设置写上eth0//我的是eth1
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):不用写什么
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:在这里写上202.96.134.133
下一个DNS是202.96.168.68 //这里根据个人不同可以修改
PASSWORD
>>> Please enter your PPPoE password:输入密码
>>> Please re-enter your PPPoE password:再输入一次
FIREWALLING
Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):这里添写为2
** Summary of what you entered **
Ethernet Interface: eth0
User name: XXX
Activate-on-demand: No
DNS: Do not adjust
Firewalling: MASQUERADE
>>> Accept these settings and adjust configuration files (y/n)?
弄完后，就按一个y键。
(以上为北南兄文章里面内容)
不要急于连接,REBOOT -N
然后进入网络设置,停止ETH1(我的是用他)
然后ADSL-START
PING 你的DNS,如果可以,那么,恭喜你!
其中部分内容可能不同,仅作参考,主要在连接后,能够PING通DNS即可!
其中win2k安装linux变慢的问题没有出现，因为我在安装前，就在磁盘管理中把最后的9G删除了，这样子就不会出现变慢的问题，推荐大家这样安装！
本贴将跟随更新,欢迎大家共同探讨! |
|
IP卡
狗仔卡
发表于 2003-5-2 19:30:44
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡