QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 1126|回复: 2

ALS 300+声卡安装

[复制链接]
发表于 2003-5-6 12:27:32 | 显示全部楼层 |阅读模式
方正颐和4100的本本,换了HD,加了MEM,装了Win2000+RH9双启,声卡是ALS 300+,安装了OSS后提示无设备,查看了error的log,里面说要把BIOS的Plug&Play OS选项置为NO,也就是说要让BIOS分配IRQ之类的东西。关掉后,打soundon声卡可以播放WAV声音了,但启动Win2000时会不停的自动重启。

初步估计是Win2000可以自动发现配置硬件,故BIOS里的Plug&Play OS选项置为YES,BIOS不分配中断等,置为NO后,BIOS分配的中断和Win2000的中断会发生冲突(?),导致Win2000不停重启。

怎么办?小弟对Linux来说是个新手,不知可不可以在Linux里手动指定声卡的IRQ解决这一问题,如果可以,请问怎么做?
发表于 2003-5-6 12:47:09 | 显示全部楼层
我用的也是ALS300+,我解决的办法比较笨,就是要进LInux就设一下BIOS,使Plug&Play为NO;反之,进XP则设为YES。还有就是设为AUTO,则两个系统都可以用,但是启动的时候需要检查内存,时间太长。
不知道有没有牛人可以解决此问题。
回复

使用道具 举报

 楼主| 发表于 2003-5-6 14:01:12 | 显示全部楼层
兄弟的声卡只出过一次声(晕),后来出不来了,soundon.log文件的内容如下
二  5月  6 12:35:09 CST 2003
OSS build 3.9.7i-0304262039 (Linux-2.4.18-27.7.x )
Kernel version: Linux Linyu 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux
Kernel signature: d275289c16f68c608d2cb97f3cb0d584
Modutils version: 2.4.22
12:35:14  up 13 min,  2 users,  load average: 0.20, 0.21, 0.12
=== Running /usr/local/bin/soundon ===
Install directory: /usr/lib/oss
Picked sndshield from sndshields/2.4.20-8-athlon-UP.gz

Warning: loading /usr/lib/oss/modules/sndshield will taint the kernel: non-GPL license - LGPL
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module sndshield loaded, with warnings
sndshield loaded OK
Warning: loading /usr/lib/oss/modules/soundbase will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module soundbase loaded, with warnings
soundbase loaded OK
Warning: loading /usr/lib/oss/modules/ac97 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module ac97 loaded, with warnings
ac97 loaded OK
Warning: loading /usr/lib/oss/modules/pnp will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module pnp loaded, with warnings
pnp loaded OK
Warning: loading /usr/lib/oss/modules/uart401 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module uart401 loaded, with warnings
uart401 loaded OK
Warning: loading /usr/lib/oss/modules/opl3 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module opl3 loaded, with warnings
opl3 loaded OK
Warning: loading /usr/lib/oss/modules/als300 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module als300 loaded, with warnings
als300 loaded OK

********************************************************************
* You can safely ignore the above message about tainting the kernel.
* It is completely political and means just that the maintainers of
* of modutils package dislike software that is not distributed under
* an open source license.
********************************************************************

Module loading finished.
==== About to start the driver using the following config ===
# Use soundconf to edit this file.
/SECUREAUDIO OFF
/PCIIRQ 5
/IRQEXCLUDE 3 4
/DMAEXCLUDE 2
-PCI03084005 #Avance Logic ALS300+
ALS300MPU ON P330
ALS300 ON
++ pnpres.dat ++
++++
Failed to activate the driver
++++ dmesg printout follows ++++
Linux version 2.4.20-8 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000eb800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000c000000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
192MB LOWMEM available.
On node 0 totalpages: 49152
zone(0): 4096 pages.
zone(1): 45056 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 547.624 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1091.17 BogoMIPS
Memory: 188876k/196608k available (1347k kernel code, 5808k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9de, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Cannot allocate resource region 4 of device 00:07.1
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0 with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1410-0x1417, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1418-0x141f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N030ATCS04-0, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 58605120 sectors (30006 MB) w/1768KiB Cache, CHS=3648/255/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 3276
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:59:01 Mar 13 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x1060, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Adding Swap: 200804k swap-space (priority -1)
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Enabling device 00:0c.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 00:0c.0
Yenta IRQ list 0698, PCI irq11
Socket status: 30000820
cs: cb_alloc(bus 2): vendor 0x10ec, device 0x8139
PCI: Enabling device 02:00.0 (0000 -> 0003)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
8139cp: 10/100 PCI Ethernet driver v0.3.0 (Sep 29, 2002)
8139cp: pci dev 02:00.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (polling).
lp0: console ready
ide-floppy driver 0.99.newide
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
MSDOS FS: IO charset cp930
FAT: freeing iocharset=cp930
MSDOS FS: IO charset cp930
FAT: freeing iocharset=cp930
MSDOS FS: IO charset cp930
FAT: freeing iocharset=cp930
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-18 00:26 , Processed in 0.076353 second(s), 16 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表