关于NVIDIA驱动程序的问题：

keming · 发表于 2003-5-7 12:42:50

我装了显卡的驱动以后就不能进入KDE了（无论是在GNOME还是在KDE中装），必须重新装一次KDE，请问这是驱动的原因还是系统的原因？
系统：Red Hat 9
显卡：GF2 MX200
驱程：NVIDIA_kernel-1.0-4363.tar
NVIDIA_GLX-1.0-4363.tar

cnhnln · 发表于 2003-5-7 20:22:36

编辑XF86Config了吗?

Bluedata · 发表于 2003-5-7 21:50:49

肯定没编辑XF86Config！ :-)

cnhnln · 发表于 2003-5-7 22:41:58

[quote:676f637ca6="Bluedata"]肯定没编辑XF86Config！ :-)[/quote]

非"闲聊居"严禁灌水骗点!!!拉出去,毙了

Bluedata · 发表于 2003-5-7 22:59:36

我是确定情况嘛！再说一遍：
肯定是没编辑XF86Config！

Dragonfly · 发表于 2003-5-8 08:35:59

[quote:4637708e79="cnhnln"][quote:4637708e79="Bluedata"]肯定没编辑XF86Config！ :-)[/quote]

非"闲聊居"严禁灌水骗点!!!拉出去,毙了

[/quote]

u are also post water here.

keming · 发表于 2003-5-8 09:22:59

退出X前没有编辑，是否一定要在退出前编辑呢？不过GNOME就不会有问题。这个问题我这里有好几个人的机都有！

Dragonfly · 发表于 2003-5-8 09:25:49

can u post u xfree86log here?

keming · 发表于 2003-5-8 12:43:34

安装驱动，编辑XF86Config后，GNOME是很正常的，登陆的时候也有NVIDIA的画面出现，就是不能进入KDE。

keming · 发表于 2003-5-8 19:14:37

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier    "Default Layout"
Screen    0  "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath    "/usr/X11R6/lib/X11/rgb"
FontPath    "unix/:7100"
EndSection

Section "Module"
Load  "dbe"
Load  "extmod"
Load  "fbdevhw"
Load  "glx"
Load  "record"
Load  "freetype"
Load  "type1"
#Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier  "Keyboard0"
Driver    "keyboard"
Option       "XkbRules" "xfree86"
Option       "XkbModel" "pc105"
Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver    "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/psaux"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier  "DevInputMice"
Driver    "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/input/mice"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samsung SyncMaster 550b"
DisplaySize  280 210
HorizSync 30.0 - 70.0
VertRefresh  50.0 - 160.0
Option       "dpms"
EndSection

Section "Device"
Identifier  "Videocard0"
Driver    "nvidia"
VendorName  "Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
VideoRam 32768
EndSection

Section "Screen"
Identifier "Screen0"
Device    "Videocard0"
Monitor "Monitor0"
DefaultDepth    24
SubSection "Display"
Depth    24
Modes "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group       0
Mode       0666
EndSection

keming · 发表于 2003-5-8 19:15:56

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier    "Default Layout"
Screen    0  "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath    "/usr/X11R6/lib/X11/rgb"
FontPath    "unix/:7100"
EndSection

Section "Module"
Load  "dbe"
Load  "extmod"
Load  "fbdevhw"
Load  "glx"
Load  "record"
Load  "freetype"
Load  "type1"
#Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier  "Keyboard0"
Driver    "keyboard"
Option       "XkbRules" "xfree86"
Option       "XkbModel" "pc105"
Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver    "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/psaux"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier  "DevInputMice"
Driver    "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/input/mice"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samsung SyncMaster 550b"
DisplaySize  280 210
HorizSync 30.0 - 70.0
VertRefresh  50.0 - 160.0
Option       "dpms"
EndSection

Section "Device"
Identifier  "Videocard0"
Driver    "nvidia"
VendorName  "Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
VideoRam 32768
EndSection

Section "Screen"
Identifier "Screen0"
Device    "Videocard0"
Monitor "Monitor0"
DefaultDepth    24
SubSection "Display"
Depth    24
Modes "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group       0
Mode       0666
EndSection

Dragonfly · 发表于 2003-5-8 21:45:24

sorry, i mean the log, not u config file. the log file can be found in /var/log/

cnhnln · 发表于 2003-5-8 23:01:14

[quote:643999c786="cheungming"][quote:643999c786="cnhnln"][quote:643999c786="Bluedata"]肯定没编辑XF86Config！ :-)[/quote]

非"闲聊居"严禁灌水骗点!!!拉出去,毙了

[/quote]

u are also post water here.

[/quote]

恭喜Bluedata荣升斑竹。看来我不再这几天 “闲聊居”一定发生了不少事呀

Dragonfly · 发表于 2003-5-8 23:24:40

this is part of my xfree86cfg, check that extmod part
Section "Module"
Load       "dbe" # Double buffer extension
      SubSection "extmod"
            Option "omit xfree86-dga"
      EndSubSection
Load       "bitmap"
# Load    "extmod"
Load       "type1"
Load       "freetype"
Load       "glx"
Load       "ddc"
# Load    "dri"
Load       "int10"
Load       "record"
Load       "speedo"
Load       "vbe"
EndSection

zrenyi · 发表于 2003-5-9 19:43:54

你用的init 3方式,改为init 5后重起即可.

		自动登录	找回密码
密码			注册