装NVIDIA-Linux-1。0-4363-run成功了但

zhangshun207 · 发表于 2003-7-13 13:29:21

装NVIDIA-Linux-1。0-4363-run成功了装完了
但启动后居然连3D游戏都进不去了。。。
怎么改CONFIG

我的是 C3OC 1。3G    384MB 耕升蝰蛇MX440-T EMC023C {刷新率我会改了}  REDHAT 9。0 完全安装

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
Identifier    "Default Layout"
Screen    0  "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath    "/usr/X11R6/lib/X11/rgb"
FontPath    "unix/:7100"
EndSection

Section "Module"
Load  "dbe"
Load  "extmod"
Load  "fbdevhw"
Load  "glx"
Load  "record"
Load  "freetype"
Load  "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier  "Keyboard0"
Driver    "keyboard"
Option       "XkbRules" "xfree86"
Option       "XkbModel" "pc105"
Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver    "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/psaux"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier  "DevInputMice"
Driver    "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/input/mice"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "EMC023C"
HorizSync 30.0 - 70.0
VertRefresh  60.0 - 149.0
Option       "dpms"
EndSection

Section "Device"
Identifier  "Videocard0"
Driver    "nv"
VendorName  "Videocard vendor"
BoardName "NVIDIA GeForce 4 (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device    "Videocard0"
Monitor "Monitor0"
DefaultDepth    24
SubSection "Display"
Depth    16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth    24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group       0
Mode       0666
EndSection

cnhnln · 发表于 2003-7-13 22:38:21

Driver "nv"
(or Driver "vesa")

with

      Driver "nvidia"

In the Module section, make sure you have:

      Load "glx"

You should also remove the following lines:

      Load  "dri"
      Load  "GLcore"

Kuye · 发表于 2003-7-13 22:43:47

NVIDIA-Linux-1.0-4363-run 好像是 for SuSE 的吧？

ftp://download.nvidia.com/XFree86/Linux-x86/1.0-4363

zhangshun207 · 发表于 2003-7-14 14:14:56

阿原来是FOR SUSE的。。。晕哦。。。怪不得。。。谢谢了各位
大虾们

zhangshun207 · 发表于 2003-7-14 14:16:45

为什么我下载FOR X86版本的老是下载不了总是出错我晕死

myleader · 发表于 2003-7-15 16:14:18

[quote:e6c9de14e5="zhangshun207"]为什么我下载FOR X86版本的老是下载不了总是出错我晕死[/quote]
本站就有下载，驱动之家也有下载，不必跑那么远去下载。

zhangshun207 · 发表于 2003-7-15 17:43:22

但我安装完了还是老样子

		自动登录	找回密码
密码			注册