求助，x崩溃一次后不能进入x了！！

topgun2 · 发表于 2003-8-12 01:24:44

显卡驱动也装了，以下是log和xf86config

部分log:

(**) DevInputMice: Protocol: "IMPS/2"
(**) Option "AlwaysCore"
(**) DevInputMice: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) DevInputMice: ZAxisMapping: buttons 4 and 5
(**) DevInputMice: Buttons: 5
(II) XINPUT: Adding extended input device "DevInputMice" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) DevInputMice: ps2EnableDataReporting: succeeded
Could not init font path element usr/lib/X11/fonts, removing from list!

Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].

xf86config:

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier    "Default Layout"
Screen    0  "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath    "/usr/X11R6/lib/X11/rgb"
FontPath    "usr/lib/X11/fonts"
EndSection

Section "Module"
Load  "dbe"
Load  "extmod"
Load  "fbdevhw"
Load  "glx"
Load  "record"
Load  "freetype"
Load  "type1"
# Load  "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier  "Keyboard0"
Driver    "keyboard"
Option       "XkbRules" "xfree86"
Option       "XkbModel" "pc105"
Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver    "mouse"
Option       "Protocol" "PS/2"
Option       "Device" "/dev/psaux"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier  "DevInputMice"
Driver    "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/input/mice"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "DDCPROBED"
DisplaySize  280 210
HorizSync 30.0 - 70.0
VertRefresh  50.0 - 130.0
Option       "dpms"
EndSection

Section "Device"
Identifier  "Videocard0"
Driver    "nvidia"
VendorName  "Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device    "Videocard0"
Monitor "Monitor0"
DefaultDepth    24
SubSection "Display"
Depth    24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group       0
Mode       0666
EndSection

BartonZhang · 发表于 2003-8-12 07:25:22

Could not init font path element usr/lib/X11/fonts, removing from list!

是不是少了font这个文件

topgun2 · 发表于 2003-8-12 17:01:58

不是，那个文件夹是存在的

打虾帮忙啊

topgun2 · 发表于 2003-8-12 17:03:38

能不能请哪位贴个正确得xf86config贴出来，侃侃到底出什么毛病了，谢谢了

cnhnln · 发表于 2003-8-12 20:31:12

FontPath "usr/lib/X11/fonts"

FontPath "/usr/lib/X11/fonts"

BartonZhang · 发表于 2003-8-12 20:45:56

厉害！
佩服！

topgun2 · 发表于 2003-8-13 00:58:54

呵呵，路径改了，不过还是不行

unable to open default font fixed!!!!

请教大虾如何解决？

能否将你们的xf86config贴出来对比参考一下？

topgun2 · 发表于 2003-8-13 02:16:59

大侠能不能把你的fonts.alias,XF86Config，fonts这个文件夹一起发给我？我的邮箱是
[email protected]
感激不尽
在text下上网的确太痛苦，我只有重起到win下面到这里求助，真是郁闷至极啊

cnhnln · 发表于 2003-8-13 21:50:23

/etc/init.d/xfs status看看xfs启动没。结果帖上来。

把FontPath "usr/lib/X11/fonts" 行注释掉试试能否启动

Benbenshi · 发表于 2003-8-13 22:34:24

运行命令：
XFree86 -configure
此命令将在用户主目录下生成XF86Config.new

运行命令：
XFree86 -xf86config ~/XF86Config.new

此命令测试这个新生成的配置文件能不能用，如果能用，把/etc/X11/XF86config文件备份后用此文件代替（注意两点，如果是4.3的，文件名为XF86config-4,把XF86Config.new改成此文件名后复制到/etc/X11下面）

如果已经打个nvidia的补丁，应该要对此文件做适应的修改，驱动才会工作，但不管做不做修改，X都应该可以工作。

cnhnln · 发表于 2003-8-15 22:39:06

什么系统？
要不加一行

FontPath "unix:/7100"

先试试

Ivn · 发表于 2003-8-16 00:37:51

看看你的 X 连接是否正常

topgun2 · 发表于 2003-8-16 21:53:26

谢谢大家，终于行了，方法是把font那一行注释掉

谢谢大家！！

FontPath "unix:/7100"

这个不行，提示此行无效，被自动remove掉了，然后说can not find font fixed!!

请问大家，这是什么原因造成的？

cnhnln · 发表于 2003-8-16 23:00:07

什么操作系统呀？

ritou · 发表于 2003-8-17 07:08:16

It is because you disabled the X font server. Why did you do that?

[quote:83d0777746="topgun2"]显卡驱动也装了，以下是log和xf86config

部分log:

(**) DevInputMice: Protocol: "IMPS/2"
(**) Option "AlwaysCore"
(**) DevInputMice: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) DevInputMice: ZAxisMapping: buttons 4 and 5
(**) DevInputMice: Buttons: 5
(II) XINPUT: Adding extended input device "DevInputMice" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) DevInputMice: ps2EnableDataReporting: succeeded
Could not init font path element usr/lib/X11/fonts, removing from list!

Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].

xf86config:

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier    "Default Layout"
Screen    0  "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath    "/usr/X11R6/lib/X11/rgb"
FontPath    "usr/lib/X11/fonts"
EndSection

Section "Module"
Load  "dbe"
Load  "extmod"
Load  "fbdevhw"
Load  "glx"
Load  "record"
Load  "freetype"
Load  "type1"
# Load  "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier  "Keyboard0"
Driver    "keyboard"
Option       "XkbRules" "xfree86"
Option       "XkbModel" "pc105"
Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver    "mouse"
Option       "Protocol" "PS/2"
Option       "Device" "/dev/psaux"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier  "DevInputMice"
Driver    "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/input/mice"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "DDCPROBED"
DisplaySize  280 210
HorizSync 30.0 - 70.0
VertRefresh  50.0 - 130.0
Option       "dpms"
EndSection

Section "Device"
Identifier  "Videocard0"
Driver    "nvidia"
VendorName  "Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device    "Videocard0"
Monitor "Monitor0"
DefaultDepth    24
SubSection "Display"
Depth    24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group       0
Mode       0666
EndSection[/quote]

		自动登录	找回密码
密码			注册

求助，x崩溃一次后不能进入x了！！

Re: 求助，x崩溃一次后不能进入x了！！