我用magic鼠标和声卡问题

peier_e

鼠标在装的时候驱错了,想改过来怎么改呢？？？
我的声卡没有驱上，是8738的，我下了一个驱动可是不知道怎么装，说明如下：

Audio driver for CM8338/CM8738 chips by Chen-Li Tien


HARDWARE SUPPORTED
================================================================================
C-Media CMI8338
C-Media CMI8738
On-board C-Media chips


WHAT'S NEW
================================================================================

  1. Support modem interface for 8738. (select in kernel configuration)
  2. Enable S/PDIF-in to S/PDIF-out (S/PDIF loop).
  3. Enable 4 channels analog duplicate mode on 3 jack or 4 jack
     configurateion.
  4. Enable joystick support. (joystick driver needed)


STEPS TO BUILD DRIVER
================================================================================

  1. Backup the Config.in and Makefile in the sound driver directory
     (/usr/src/linux/driver/sound).
     The Configure.help provide help when you config driver in step
     4, please backup the original one (/usr/src/linux/Document) and
     copy this file.
     The cmpci is document for the driver in detail, please copy it
     to /usr/src/linux/Document/sound so you can refer it. Backup if
     there is already one.

  2. Extract the tar file by 'tar xvzf cmpci-xx.tar.gz' in the above
     directory.

  3. Change directory to /usr/src/linux

  4. Config cm8338 driver by 'make menuconfig', 'make config' or
     'make xconfig' command.

  5. Please select Sound Card (CONFIG_SOUND=m) support and CMPCI
     driver (CONFIG_SOUND_CMPCI=m) as modules. Resident mode not tested.
     For driver option, please refer 'DRIVER PARAMETER'

  6. Compile the kernel if necessary.

  7. Compile the modules by 'make modules'.

  8. Install the modules by 'make modules_install'


INSTALL DRIVER
================================================================================

  1. Before first time to run the driver, create module dependency by
     'depmod -a'

  2. To install the driver manually, enter 'modprobe cmpci'.

  3. Driver installation for various distributions:

    a. Slackware 4.0
       Add the 'modprobe cmpci' command in your /etc/rc.d/rc.modules
       file.so you can start the driver automatically each time booting.

    b. Caldera OpenLinux 2.2
       Use LISA to load the cmpci module.

    c. RedHat 6.0 and S.u.S.E. 6.1
       Add following command in /etc/conf.modules:

       alias sound cmpci

        also visit http://www.cmedia.com.tw for installation instruction.

DRIVER PARAMETER
================================================================================

  Some functions for the cm8738 can be configured in Kernel Configuration
  or modules parameters. Set these parameters to 1 to enable.

  spdif_loop:   Enable S/PDIF loop, this route S/PDIF-in to S/PDIF-out
                directly.
  four_ch:      Enable 4 channels mode, rear-out or line-in will output
                the same as line-out.
  rear_out:     Enable this if you have independent rear-out jacket on
                your sound card, otherwise line-in will be used as
                rear-out.
  modem:        You will need to set this parameter if you want to use
                the HSP modem. You need install the pctel.o, the modem
                driver itself.
  joystich:        Enable joystick. You will need to install Linux joystick
                driver.



我真是不知道怎么办拉，我对Linux可是一窍办通啊！

baif

用setup中的soundconfig找这块声卡，找不到的话，认命吧。

llc

找以前的帖子，有说过解决方法

sndconfig好像有bug，找不到这块声卡

tanhitzq

装alsa

peier_e

我的鼠标是驱错了，不是没找到啊，应该是滚轮的，结果给驱成三件的了，我想知道怎么重新驱动，

peier_e

对呀，我就是装的时候，选错了，那现在怎么改呢？？？
我想改回wheel(ps/2)怎么改呢？？？

peier_e

声卡已经驱上了。


可是setup  mouse里没有wheel的鼠标呢？？？

peier_e

恩，我试一下吧

peier_e

我已经驱上鼠标了！
是用ms驱的

flyeagle00s1

8738?
为什么总有人说8738不能用？
我的8738很好啊，不是集成的，是pcl的。
在rh8,9,mandrake9,9.1ml1.1中都没有问题。
我的声卡是在科技市场花45买的。集成的via声音效果不如它好。当然它也不怎么样。（买它的原因是因为原来的realplay使用via686b播放文件声音只有暴音,当时说解决的方法是放弃主板集成产品，使用单独声卡。当然现在的real已经没有问题。音质比686b好是后来发现的）
不过使用8738时系统运行速度不如via快。（在win下玩游戏时得出的结论，平时看不出来）

peier_e

我已经驱上了，C8738了，用llc的方法在setup里就找到声卡的驱动了，还是要谢谢大家帮忙了。