紧急补丁 For MagicLinux 1.2pre3

cjacker · 发表于 2003-9-26 02:01:03

紧急port了一个X配置工具给大家，呵呵。

出现的spawn too fast和不能启动X问题可以用它解决。

安装，先运行kbdconfig然后运行xconfig就OK了。
或者使用setup就可以看到了

cjacker · 发表于 2003-9-26 02:05:43

关于启动过程中的mounting local filesystems Failed
大家可以看一下/etc/rc.d/rc.sysinit文件的628行。
action $"Mounting local filesystems: " mount -a -t nonfs,smbfs, ncpfs -O no_netdev
大家试试改成action $"Mounting local filesystems: " mount -a看看这样会不会出错了。

这个错误不是致命的，可能没有任何影响。

请提交fstab和/proc/mtab给我，多谢。

上面的配置工具生成/etc/X11/XF86Config和/etc/X11/XF86Config-4
如果用nv显卡的，安装驱动后，可以修改/etc/X11/XF86Config-4文件。
滚轮鼠标自己配置就可以了。

kenwee · 发表于 2003-9-26 08:42:31

好，马上下载，再测试一下。

cjacker · 发表于 2003-9-26 09:23:44

[quote:06cc671bd7="cjacker"]关于启动过程中的mounting local filesystems Failed
大家可以看一下/etc/rc.d/rc.sysinit文件的628行。
action $"Mounting local filesystems: " mount -a -t nonfs,smbfs, ncpfs -O no_netdev
大家试试改成action $"Mounting local filesystems: " mount -a看看这样会不会出错了。

这个错误不是致命的，可能没有任何影响。

请提交fstab和/proc/mtab给我，多谢。

上面的配置工具生成/etc/X11/XF86Config和/etc/X11/XF86Config-4
如果用nv显卡的，安装驱动后，可以修改/etc/X11/XF86Config-4文件。
滚轮鼠标自己配置就可以了。
[/quote]

因为他是用来mout other分区的，而我的测试仅仅是一个/分区，所以没有发现。

wangjin126 · 发表于 2003-9-26 11:32:25

提示：error File not found by glob :Xconfigurator-**

cjacker · 发表于 2003-9-26 11:44:17

[quote:b26abf6c09="cjacker"]紧急port了一个X配置工具给大家，呵呵。

出现的spawn too fast和不能启动X问题可以用它解决。

安装，运行xconfig就OK了。[/quote]

wangjin126 · 发表于 2003-9-26 11:51:59

[quote:58cec89ba6="cjacker"]关于启动过程中的mounting local  filesystems Failed
大家可以看一下/etc/rc.d/rc.sysinit文件的628行。
action $"Mounting local filesystems: " mount -a -t nonfs,smbfs,       ncpfs -O no_netdev
大家试试改成action $"Mounting local filesystems: " mount -a看看这样会不会出错了。

这个错误不是致命的，可能没有任何影响。

请提交fstab和/proc/mtab给我，多谢。

上面的配置工具生成/etc/X11/XF86Config和/etc/X11/XF86Config-4
如果用nv显卡的，安装驱动后，可以修改/etc/X11/XF86Config-4文件。
滚轮鼠标自己配置就可以了。
[/quote]
提示依旧
fstab如下：
/dev/hda9    /                ext2       default                         1  1
none             /dev/pts    devpts    gid=5,mod=620          0  0
none             /dev/shm    tmpfs    default                         0  0
/dev/hdc       /mnt/cdrom  iso9660 noayto,user,ro             0 0
none          /proc          proc       default                         0 0
/dev/hda8    swap          swap       default                         0 0
没有找到/proc/mtab

baif · 发表于 2003-9-26 21:05:13

我喜欢我喜欢。哈哈，能够正常识别我的显卡。

ys021662 · 发表于 2003-9-26 21:35:30

用了这个补丁后，配置测试能正常通过！
不过STARTX仍然不能启动!

不好意思，在Windows 下，无法压成GZ
只好将.log改成.gz

easthero1982 · 发表于 2003-9-26 21:39:50

[quote:3e7332fca8="wangjin126"]
提示：error File not found by glob :Xconfigurator-**
[/quote]
把你下载的文件改个名字即可，文件名不要出现中括号之类的
[quote:3e7332fca8="Axin"]
startx也出现下面错误，我现在来格一个ext2的盘试试，尽量还愿charles当时测试环境，然后我试度USB mouse,我把PS/s拨下来试试！

XIO: fatal IO error 104(connection reset by peer) on X server ":0.0" after o requests (0 known processed) with 0 events remaining.
[/quote]
我也出现了同样的问题

easthero1982 · 发表于 2003-9-26 21:40:31

我的显卡是nv vanta M64,我换个显卡试试看

whz81 · 发表于 2003-9-26 21:47:37

第2次bug提交

下载配置工具，配置成功，出现测试画面

但startx出现
server error
caught signal 11 server aborting

XIO错误

easthero1982 · 发表于 2003-9-26 21:51:52

我把我的nv拆下，用815主板自带的显卡，还是不行
把我的/var/log/XFree86.log帖上来
[code:1]
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/localhost:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to [email protected] and patches submitted
to [email protected].  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.3.99.10 (Magic Linux release: 4.4.0-0.20030819.1)
Release Date: 10 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22-1 i686 [ELF]
Build Date: 11 September 2003
Changelog Date: 17 August 2003
Build Host: cjackerOS

Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.22-1 (root@cjackerOS) (gcc version 3.3 (Magic Linux 3.3-1)) #1 三 9月 10 10:50:23 CST 2003
Markers: (--) probed, (**) from config file, (==) default setting,
      (++) from command line, (!!) notice, (II) informational,
      (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Sep 26 21:36:18 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "HP D8894 HP 55 15-inch Monitor"
(**) | |-->Device "Intel Corp.|82815 CGC [Chipset Graphics "
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.7
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 8086,1130 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,1132 card 103c,1245 rev 02 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2415 card 103c,1249 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:04:0: chip 10b7,9200 card 103c,1246 rev 78 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xec100000 - 0xec1fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corp. 82815 CGC [Chipset Graphics Controller] rev 2, Mem @ 0xf0000000/26, 0xec000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xec100000 - 0xec10007f (0x80) MX[B]
[1] -1 0 0xec000000 - 0xec07ffff (0x80000) MX[B](B)
[2] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[3] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[4] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[5] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[6] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[7] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[8] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xec100000 - 0xec10007f (0x80) MX[B]
[1] -1 0 0xec000000 - 0xec07ffff (0x80000) MX[B](B)
[2] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[3] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[4] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[5] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[6] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[7] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[8] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xec100000 - 0xec10007f (0x80) MX[B]
[6] -1 0 0xec000000 - 0xec07ffff (0x80000) MX[B](B)
[7] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[11] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[12] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[13] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[14] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[15] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.3.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset i815 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xec100000 - 0xec10007f (0x80) MX[B]
[6] -1 0 0xec000000 - 0xec07ffff (0x80000) MX[B](B)
[7] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[11] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[12] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[13] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[14] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[15] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xec100000 - 0xec10007f (0x80) MX[B]
[6] -1 0 0xec000000 - 0xec07ffff (0x80000) MX[B](B)
[7] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[14] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[15] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[16] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[17] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[18] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(**) I810(0): Depth 16, (--) framebuffer bpp 16
(==) I810(0): RGB weight 565
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel(R) 815 Chipset Video BIOS
(II) I810(0): VESA VBE OEM Software Rev: 4.1
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(R) 815 Chipset
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: HWP  Model: 22be  Serial#: 3466300
(II) I810(0): Year: 2000  Week: 34
(II) I810(0): EDID Version: 1.1
(II) I810(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) I810(0): Sync:  Separate
(II) I810(0): Max H-Image Size [cm]: horiz.: 28  vert.: 21
(II) I810(0): Gamma: 2.60
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): redX: 0.625 redY: 0.340 greenX: 0.310 greenY: 0.592
(II) I810(0): blueX: 0.150 blueY: 0.063 whiteX: 0.283 whiteY: 0.299
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 1024x768@60Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) I810(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 25.2 MHz Image Size:  350 x 262 mm
(II) I810(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) I810(0): v_active: 400  v_sync: 412  v_sync_end 414 v_blanking: 449 v_border: 0
(II) I810(0): Monitor name: HP 55 Monitor
(II) I810(0): Serial No: CN03466300
(II) I810(0): Ranges: V min: 50  V max: 120 Hz, H min: 30  H max: 54 kHz, PixClock max 70 MHz
(--) I810(0): Chipset: "i815"
(--) I810(0): Linear framebuffer at 0xF0000000
(--) I810(0): IO registers at addr 0xEC000000
(II) I810(0): I810CheckAvailableMemory: 151548k available
(**) I810(0): Will alloc AGP framebuffer: 4096 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): HP D8894 HP 55 15-inch Monitor: Using hsync range of 30.00-54.00 kHz
(II) I810(0): HP D8894 HP 55 15-inch Monitor: Using vrefresh range of 50.00-120.00 Hz
(II) I810(0): Clock range:  12.00 to 163.00 MHz
(II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (hsync out of range)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (hsync out of range)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1024" (hsync out of range)
(II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) I810(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x768" (width too large for virtual size)
(II) I810(0): Not using default mode "1024x768" (width too large for virtual size)
(II) I810(0): Not using default mode "832x624" (width too large for virtual size)
(--) I810(0): Virtual size is 800x600 (pitch 1024)
(**) I810(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) I810(0): Modeline "800x600" 56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) I810(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) I810(0): Modeline "800x600" 49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) I810(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) I810(0): Modeline "800x600" 50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) I810(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) I810(0): Modeline "800x600" 40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) I810(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) I810(0): Modeline "800x600" 36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) I810(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) I810(0): Modeline "640x480" 36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) I810(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) I810(0): Modeline "640x480" 31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) I810(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) I810(0): Modeline "640x480" 31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) I810(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) I810(0): Modeline "640x480" 25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) I810(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) I810(0): Modeline "720x400" 35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) I810(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x400" 31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) I810(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x350" 31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(--) I810(0): Display dimensions: (280, 210) mm
(--) I810(0): DPI set to (72, 72)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.99.10, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xec000000 - 0xec07ffff (0x80000) MS[B]
[1] 0 0 0xf0000000 - 0xf3ffffff (0x4000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xec100000 - 0xec10007f (0x80) MX[B]
[8] -1 0 0xec000000 - 0xec07ffff (0x80000) MX[B](B)
[9] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x00002000 - 0x0000207f (0x80) IX[B]
[16] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[17] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[18] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[20] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) I810(0): [drm] created "i810" driver at busid "PCI:0:2:0"
(II) I810(0): [drm] added 8192 byte SAREA at 0x4c8c1000
(II) I810(0): [drm] mapped SAREA 0x4c8c1000 to 0x1556b000
(II) I810(0): [drm] framebuffer handle = 0xf0000000
(II) I810(0): [drm] added 1 reserved context for kernel
(II) I810(0): [drm] Registers = 0xec000000
(II) I810(0): [agp] dcacheHandle : (nil)
(II) I810(0): [agp] GART: no dcache memory found
(II) I810(0): [agp] Bound backbuffer memory
(II) I810(0): [agp] Bound depthbuffer memory
(II) I810(0): [agp] GART: Allocated 4K for mouse cursor image
(II) I810(0): Adding 768 scanlines for pixmap caching
(WW) I810(0): Framebuffer allocation failed
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0x4c8c1000 at 0x1556b000
(==) I810(0): Write-combining range (0xf0000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 56.3 MHz [ 0x3b 0xb 0x30 ] [ 61 13 3 ]
(II) I810(0): chose watermark 0x22108000: (tab.freq 56.3)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x00400000 (pgoffset 1024)
(II) I810(0): Adding 768 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
28 128x128 slots
6 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) Option "dpms"
(**) I810(0): DPMS enabled
(==) I810(0): Direct rendering disabled
(==) RandR enabled
Symbol xf86Info from module /usr/X11R6/lib/modules/input/mouse_drv.o is unresolved!
Symbol xf86I2CFindDev from module /usr/X11R6/lib/modules/libddc.a is unresolved!
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Emulate3Buttons" "off"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded

*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.

Fatal server error:
Caught signal 11.  Server aborting

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].

(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
[/code:1]

ys021662 · 发表于 2003-9-26 21:52:16

[quote:9b6f714abc="whz81"]第2次bug提交

下载配置工具，配置成功，出现测试画面

但startx出现
server error
caught signal 11 server aborting

XIO错误[/quote]
对对，我也是出现同样的错误！

qianzheng82 · 发表于 2003-9-26 22:08:02

在/etc/X11/XF86config-4中把FontPath "unix/:7100"注释掉，换成FontPath "/usr/X11R6/lib/X11/fonts/misc"试试．<br>
改好后我的x是可以启动了，但kde出错，我没记下出错信息，大概看了一下是ICE出问题，导致kde退出

		自动登录	找回密码
密码			注册

紧急补丁 For MagicLinux 1.2pre3

本帖子中包含更多资源

Re: 紧急补丁 For MagicLinux 1.2pre3

本帖子中包含更多资源

本帖子中包含更多资源