怎么修改显示器的刷新率啊

yinbangxu · 发表于 2003-11-17 01:34:18

各位高手,显示器的刷新率太低了,好耀眼,怎么修改显示器的刷新率啊,有高手教我一下吗,谢谢了!请直接回复或到我的个人主页上留言,谢谢了!主页地址是http://wq168.nease.net摆脱了哦!

rianren · 发表于 2003-11-17 09:34:56

前面有很多贴是这方面的，你自己看看吧！

yinbangxu · 发表于 2003-11-17 12:43:06

还是没有改的了啊了,你看看我的xF86config文件好不?谢谢了!不伤眼吧!呵呵~~~
# File generated by anaconda.

Section "ServerLayout"
      Identifier    "Anaconda Configured"
      Screen    0  "Screen0" 0 0
      InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
      InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:7100"

EndSection

Section "Module"
      Load  "dbe"
      Load  "extmod"
Load  "fbdevhw"
Load  "dri"
      Load  "glx"
      Load  "record"
      Load  "freetype"
      Load  "type1"
EndSection

Section "InputDevice"
      Identifier  "Keyboard0"
      Driver    "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection

Section "InputDevice"
      Identifier  "Mouse0"
      Driver    "mouse"
      Option    "Protocol" "PS/2"
      Option    "Device" "/dev/psaux"
      Option    "ZAxisMapping" "4 5"
      Option    "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
      Identifier "Monitor0"
      VendorName "Monitor Vendor"
      ModelName "Monitor Model"
      HorizSync 30-71
      VertRefresh 50-160
      Option "dpms"

EndSection

Section "Device"
# no known options
Identifier "NVIDIA GeForce 4 (generic)"
      Driver    "vesa"
      VendorName "NVIDIA GeForce 4 (generic)"
      BoardName    "NVIDIA GeForce 4 (generic)"

      #BusID
EndSection

Section "Screen"
Identifier "Screen0"
      Device    "NVIDIA GeForce 4 (generic)"
      Monitor    "Monitor0"
DefaultDepth 16

Subsection "Display"
        Depth    16
            Modes    "1024x768" "800x600" "640x480"
EndSubsection

EndSection

Section "DRI"
Mode 0666
EndSection

Bluedata · 发表于 2003-11-17 14:19:29

Modes "1024x768" "800x600" "640x480"
这行改成
Modes "1024x768"
试试。

djklhm · 发表于 2003-11-17 14:48:06

斑竹：你该的是分辨率。问题时怎样改刷新率

rianren · 发表于 2003-11-18 10:24:57

xf86config

yinbangxu · 发表于 2003-11-18 14:31:39

呵呵，谢谢了，我现在改成85MHZ了，可是还是有点闪，怎么在WINDOWS下85已很好了，在这里LINUX下就有点怪了啊，郁闷呢~~~~呜！

Bluedata · 发表于 2003-11-18 14:40:05

[quote:ad86a1115f="djklhm"]斑竹：你该的是分辨率。问题时怎样改刷新率[/quote]
不好意思，看错了。

sharn · 发表于 2003-11-22 19:40:19

呵呵，你改这行试试
VertRefresh 50-160
改为
VertRefresh 90-160

		自动登录	找回密码
密码			注册