高手，斑竹请进…………

kimjiang

这就是厂商提供的驱动程序中的readme.txt文件，内容如下：               *********************************************                                Myson MTD80X Based Fast Ethernet Card                     
                   Linux 2.4.X Driver Installation           Guide                                       **************************************************
         

-----------------------
Installation Procedure
-----------------------

  
1. Copy the compress file mtd80x-linux-2.4.x.tgz to /tmp directory

     mount -t msdos /dev/fd0 /mnt/floppy       

     cp /mnt/floppy/linux-2.4.x/mtd80x-linux-2.4.x.tgz /tmp
2. Uncompress the file

         
     cd /tmp
       
     tar -zxvf mtd80x-linux-2.4.x.tgz
以上几步我都做了，解压缩之后得到六个文件：mtd80x.c  pci-scan.c  
kern_compat.h  pci-scan.h  makefile    readme.txt

  
3. Make network adapter driver modules

       
     touch *      //回车后没反应
       
     make clean    //回车后在下面一行出现rm  -f   *.o
       
     make          //回车后，列出很信息，文件出错，其中有：
........................................................
.........................................................
............................................................
pci-scan.c:In function 'cleanup_module':
pci-scan.c:552:'Kern_warning'undeclared' (first use in this function)
pci-scan.c:552:parse error before string constant
make: *** [pci-scan.o] error 1

     
*Under some distribution, such as SuSe 7.2 and BluePoint 2.0, there is no version.h.
      You have to run "make config" or "make menuconfig" at /usr/src/linux to create it.
      
   **If you are using Mandrake 8.0 and you have problems when insmod the dirver, please
      remove "-DMODVERSIONS" option from makefile.

   
***On SMP system, the driver may NOT work well. The bug will be fixed in the future.

  
4. Insert network adapter driver modules

       
     insmod        pciscan.o  ////回车后，在下面一行显示：“
insmod : pciscan.o :no such file or directory
       
     insmod        mtd80x.o   ////回车后，在下面一行显示：“
insmod : mtd80x.o :no such file or directory
  
5. Bind your card to an IP address

       
     ifconfig eth0 {IPADDR} netmask {NETMASK}//////这行我没有继续。

  
6. Now, you should be able to ping local network.


*Every time you reboot the system, you must execute step 4 and step 5
  again to bind your card.



Compability:
       
This driver is tested with the Distribution.
       
        RedHat 7.1/7.2
        Mandrake 8.0/8.1
        Slackware 8.0
        SuSe 7.2
        RedFlag 2.4
        Caldera 3.0
我用的是RH8.0，网卡名字是myson mtd80x based fast ehternet card
是不是驱动程序不对啊？

吴文官

你还是试一下这个办法吧。
http://www.linuxfans.org/nuke/modules.php?name=Forums&file=viewtopic&t=5168&start=0&postdays=0&postorder=asc&highlight=