怎样才能把引导区刻录到CD-R上？

wqsd · 发表于 2004-2-26 08:32:34

我下载了ml的镜象，刻录到光盘后无法用光盘启动，也就是引导区丢失，怎么刻录才行？

easthero1982 · 发表于 2004-2-26 09:18:52

你不会是把iso解开然后把iso中的文件刻到光盘上的吧？
要直接把iso刻到光盘上

樱家冢 · 发表于 2004-2-26 12:32:09

用Burn Image，不是把文件往上拖……

wqsd · 发表于 2004-2-26 16:56:35

我直接burning镜象的，用的nero，可是不行，不知道什么原因。

easthero1982 · 发表于 2004-2-26 17:04:19

check一下md5sum

ziming2 · 发表于 2004-2-26 18:44:48

try burn it under linux, this is an example,

cdrecord -v speed=4 dev=0,0 -dao yourfile.iso

note -dao option is very important for bootable disk, or your disk will not boot at all.

樱家冢 · 发表于 2004-2-26 20:03:10

[quote:d6810f7bbd="ziming2"]try burn it under linux, this is an example,

cdrecord -v speed=4 dev=0,0 -dao yourfile.iso

note -dao option is very important for bootable disk, or your disk will not boot at all.[/quote]
你牛……

killxp · 发表于 2004-2-27 22:50:00

[quote:b828f977cd="ziming2"]try burn it under linux, this is an example,

cdrecord -v speed=4 dev=0,0 -dao yourfile.iso

note -dao option is very important for bootable disk, or your disk will not boot at all.[/quote]

又有新朋友了啊。

		自动登录	找回密码
密码			注册