QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 1442|回复: 6

求救,X-Window启动不了了!

[复制链接]
发表于 2004-3-17 19:34:23 | 显示全部楼层 |阅读模式
昨天在关机时提示"/"文件系统umount失败。重新启动后就进不了X-Window 了,从最初的提示我以为/分区空间不够了
于是我在字符终端删掉了/usr/local/src/中的大约60MB的软件源程序,但用df查看发现分区还是使用了100%。
今天启动时用fsck对/文件系统进行修复,一切正常,但进入系统后还是启动不了KDE。错误输出如下:
[way@localhost way]$ startx
/usr/X11R6/bin/startx: line 134: cannot create temp file for here document: 设备上没有空间
/usr/X11R6/bin/startx: line 134: cannot create temp file for here document: 设备上没有空间

XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmen i686 [ELF]
Build Data: 27 February 2003
Build Host: porky.devel.redhat.com

        Before reporting problems, check http://www.XFree86.org/
        to make sure that you have the latest version.
       
Module Loader present
OS kernel: Linux version 2.4.20-8([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5))#1 Thu
Mar 13 17:54:28 EST 2003

Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) Warning, (EE) error, (NI) not implemented, (??) unkown.
         
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 17 16:21:43 2004
(==) Using config file: "/etc/X11/XF86Config"

Error server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send the full
server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].

XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
     after 0 request (0 known processed) with 0 events remaining.

从df的结果来看,/应该还有50多MB空间,但为何显示无可用空间?
    (注:系统为RedHat Linux 9;IBM ThinkPad 600X,PIII-500,192M,6.4G;我的Linux分区为:200MB swap, 2900MB /)
    由于空间有限,不知分出多少空间给/usr,对于硬盘分区,不知哪位人兄有些好的建议。
[way@localhost way]$ df
文件系统                1K-块                已用                可用                已用%                挂载点
/dev/hda7                2976400                2919284                    0                100%                /
none                          95248                      0                95248                  0%                /dev/shm
/dev/hda1                2048448                1637760               410688                 80%                /mnt/c
/dev/hda5                1018560                 418740               599820                 42%                /mnt/d
 楼主| 发表于 2004-3-17 19:38:27 | 显示全部楼层

"/var/log/XFree86.0.log"文件

/var/log/XFree86.0.log:
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]
Build Date: 27 February 2003
Build Host: porky.devel.redhat.com

        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.20-8 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 17 16:21:43 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "DevInputMice"
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 4

(II) Open APM successful
(II) Module ABI versions:
        XFree86 ANSI C Emulation: 0.2
        XFree86 Video Driver: 0.6
        XFree86 XInput driver : 0.4
        XFree86 Server Extension : 0.2
        XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 104c,ac1b card 4800,0000 rev 03 class 06,07,00 hdr 82
(II) PCI: 00:02:1: chip 104c,ac1b card 5000,0000 rev 03 class 06,07,00 hdr 82
(II) PCI: 00:03:0: chip 11c1,0449 card 1014,018c rev 01 class 07,80,00 hdr 00
(II) PCI: 00:06:0: chip 1013,6003 card 1014,0153 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
(II) PCI: 01:00:0: chip 10c8,0006 card 1014,0152 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set)
(II) Bus 1 I/O range:
        [0] -1        0        0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
        [0] -1        0        0x70000000 - 0xdfffffff (0x70000000) MX[B]
(II) Bus 1 prefetchable memory range:
        [0] -1        0        0xe0000000 - 0xf7ffffff (0x18000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:2:0), (0,2,4), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
        [0] -1        0        0x00004800 - 0x000048ff (0x100) IX[B]
        [1] -1        0        0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
        [0] -1        0        0x10400000 - 0x107fffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
        [0] -1        0        0x10000000 - 0x103fffff (0x400000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 5: bridge is at (0:2:1), (0,5,7), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 5 I/O range:
        [0] -1        0        0x00005000 - 0x000050ff (0x100) IX[B]
        [1] -1        0        0x00005400 - 0x000054ff (0x100) IX[B]
(II) Bus 5 non-prefetchable memory range:
        [0] -1        0        0x10c00000 - 0x10ffffff (0x400000) MX[B]
(II) Bus 5 prefetchable memory range:
        [0] -1        0        0x10800000 - 0x10bfffff (0x400000) MX[B]
(--) PCI:*(1:0:0) Neomagic Corporation NM2360 [MagicMedia 256ZX] rev 0, Mem @ 0xe0000000/25, 0x70000000/22, 0x70400000/20
(II) Addressable bus resource ranges are
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0x40000000 from 0x43ffffff to 0x3fffffff
(II) Active PCI resource ranges:
        [0] -1        0        0x50000000 - 0x500fffff (0x100000) MX[B]
        [1] -1        0        0x50100000 - 0x50100fff (0x1000) MX[B]
        [2] -1        0        0x50101000 - 0x501010ff (0x100) MX[B]
        [3] -1        0        0x40000000 - 0x3fffffff (0x0) MX[B]O
        [4] -1        0        0x70400000 - 0x704fffff (0x100000) MX[B](B)
        [5] -1        0        0x70000000 - 0x703fffff (0x400000) MX[B](B)
        [6] -1        0        0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B)
        [7] -1        0        0x00004000 - 0x0000401f (0x20) IX[B]
        [8] -1        0        0x0000fcf0 - 0x0000fcff (0x10) IX[B]
        [9] -1        0        0x00004400 - 0x000044ff (0x100) IX[B]
        [10] -1        0        0x00004500 - 0x00004507 (0x IX[B]
(II) Active PCI resource ranges after removing overlaps:
        [0] -1        0        0x50000000 - 0x500fffff (0x100000) MX[B]
        [1] -1        0        0x50100000 - 0x50100fff (0x1000) MX[B]
        [2] -1        0        0x50101000 - 0x501010ff (0x100) MX[B]
        [3] -1        0        0x40000000 - 0x3fffffff (0x0) MX[B]O
        [4] -1        0        0x70400000 - 0x704fffff (0x100000) MX[B](B)
        [5] -1        0        0x70000000 - 0x703fffff (0x400000) MX[B](B)
        [6] -1        0        0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B)
        [7] -1        0        0x00004000 - 0x0000401f (0x20) IX[B]
        [8] -1        0        0x0000fcf0 - 0x0000fcff (0x10) IX[B]
        [9] -1        0        0x00004400 - 0x000044ff (0x100) IX[B]
        [10] -1        0        0x00004500 - 0x00004507 (0x IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0x50000000 - 0x500fffff (0x100000) MX[B]
        [6] -1        0        0x50100000 - 0x50100fff (0x1000) MX[B]
        [7] -1        0        0x50101000 - 0x501010ff (0x100) MX[B]
        [8] -1        0        0x40000000 - 0x3fffffff (0x0) MX[B]O
        [9] -1        0        0x70400000 - 0x704fffff (0x100000) MX[B](B)
        [10] -1        0        0x70000000 - 0x703fffff (0x400000) MX[B](B)
        [11] -1        0        0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B)
        [12] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [13] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [14] -1        0        0x00004000 - 0x0000401f (0x20) IX[B]
        [15] -1        0        0x0000fcf0 - 0x0000fcff (0x10) IX[B]
        [16] -1        0        0x00004400 - 0x000044ff (0x100) IX[B]
        [17] -1        0        0x00004500 - 0x00004507 (0x IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 0.0.2
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.13.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 2.0.2
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.2
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "neomagic"
(II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o
(II) Module neomagic: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 XInput Driver
        ABI class: XFree86 XInput driver, version 0.4
(II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
        neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset neo2360 found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0x50000000 - 0x500fffff (0x100000) MX[B]
        [6] -1        0        0x50100000 - 0x50100fff (0x1000) MX[B]
        [7] -1        0        0x50101000 - 0x501010ff (0x100) MX[B]
        [8] -1        0        0x40000000 - 0x3fffffff (0x0) MX[B]O
        [9] -1        0        0x70400000 - 0x704fffff (0x100000) MX[B](B)
        [10] -1        0        0x70000000 - 0x703fffff (0x400000) MX[B](B)
        [11] -1        0        0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B)
        [12] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [13] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [14] -1        0        0x00004000 - 0x0000401f (0x20) IX[B]
        [15] -1        0        0x0000fcf0 - 0x0000fcff (0x10) IX[B]
        [16] -1        0        0x00004400 - 0x000044ff (0x100) IX[B]
        [17] -1        0        0x00004500 - 0x00004507 (0x IX[B]
(II) resource ranges after probing:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0x50000000 - 0x500fffff (0x100000) MX[B]
        [6] -1        0        0x50100000 - 0x50100fff (0x1000) MX[B]
        [7] -1        0        0x50101000 - 0x501010ff (0x100) MX[B]
        [8] -1        0        0x40000000 - 0x3fffffff (0x0) MX[B]O
        [9] -1        0        0x70400000 - 0x704fffff (0x100000) MX[B](B)
        [10] -1        0        0x70000000 - 0x703fffff (0x400000) MX[B](B)
        [11] -1        0        0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B)
        [12] 0        0        0x000a0000 - 0x000affff (0x10000) MS[B]
        [13] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [14] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[B]
        [15] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [16] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [17] -1        0        0x00004000 - 0x0000401f (0x20) IX[B]
        [18] -1        0        0x0000fcf0 - 0x0000fcff (0x10) IX[B]
        [19] -1        0        0x00004400 - 0x000044ff (0x100) IX[B]
        [20] -1        0        0x00004500 - 0x00004507 (0x IX[B]
        [21] 0        0        0x000003b0 - 0x000003bb (0xc) IS[B]
        [22] 0        0        0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) NEOMAGIC(0): Chipset is a MagicMedia 256ZX (NM2360)
(II) NEOMAGIC(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) NEOMAGIC(0): Panel is a 1024x768 color TFT display
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) NEOMAGIC(0): initializing int10
(II) NEOMAGIC(0): Primary V_BIOS segment is: 0xc000
(II) NEOMAGIC(0): VESA BIOS detected
(II) NEOMAGIC(0): VESA VBE Version 2.0
(II) NEOMAGIC(0): VESA VBE Total Mem: 4032 kB
(II) NEOMAGIC(0): VESA VBE OEM: MagicMedia 256ZX  48K
(II) NEOMAGIC(0): VESA VBE OEM Software Rev: 2.0
(II) NEOMAGIC(0): VESA VBE OEM Vendor: NeoMagic
(II) NEOMAGIC(0): VESA VBE OEM Product: MagicMedia 256ZX
(II) NEOMAGIC(0): VESA VBE OEM Product Rev: 01.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) NEOMAGIC(0): VESA VBE DDC supported
(II) NEOMAGIC(0): VESA VBE DDC Level none
(II) NEOMAGIC(0): VESA VBE DDC transfer in appr. 0 sec.
(II) NEOMAGIC(0): VESA VBE DDC read failed
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.2.0
        ABI class: XFree86 Video Driver, version 0.6
(II) NEOMAGIC(0): I2C bus "I2C bus" initialized.
(II) NEOMAGIC(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) NEOMAGIC(0): I2C device "I2C bus:ddc2" removed.
(--) NEOMAGIC(0): No DDC signal
(**) NEOMAGIC(0): Depth 16, (--) framebuffer bpp 16
(==) NEOMAGIC(0): RGB weight 565
(==) NEOMAGIC(0): Default visual is TrueColor
(==) NEOMAGIC(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NEOMAGIC(0): Option "internDisp"
(**) NEOMAGIC(0): Option "externDisp"
(**) NEOMAGIC(0): Simultaneous LCD/CRT display mode
(==) NEOMAGIC(0): using linear mode
(**) NEOMAGIC(0): using PCI Burst mode
(**) NEOMAGIC(0): Option StrangeLockups set: disabling some acceleration
(--) NEOMAGIC(0): FB base address is set at 0xE0000000.
(--) NEOMAGIC(0): MMIO base address is set at 0x70000000.
(--) NEOMAGIC(0): MMIO base address2 is set at 0x70400000.
(**) NEOMAGIC(0): VideoRAM: 4096 kByte
(--) NEOMAGIC(0): Max Clock: 110000 kHz
(II) NEOMAGIC(0): Monitor0: Using hsync range of 48.00-65.00 kHz
(II) NEOMAGIC(0): Monitor0: Using vrefresh range of 60.00-75.00 Hz
(II) NEOMAGIC(0): Clock range:  11.00 to 110.00 MHz
(II) NEOMAGIC(0): Removing mode (640x350) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x350" (unknown reason)
(II) NEOMAGIC(0): Removing mode (320x175) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "320x175" (unknown reason)
(II) NEOMAGIC(0): Removing mode (640x400) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x400" (unknown reason)
(II) NEOMAGIC(0): Removing mode (320x200) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "320x200" (unknown reason)
(II) NEOMAGIC(0): Removing mode (720x400) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "720x400" (unknown reason)
(II) NEOMAGIC(0): Removing mode (360x200) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "360x200" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "640x480" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "320x240" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "640x480" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "320x240" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "640x480" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "320x240" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "640x480" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "320x240" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "800x600" (vrefresh out of range)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1024x768" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1152x864) larger than the LCD panel (1024x76
(II) NEOMAGIC(0): Not using default mode "1152x864" (unknown reason)
(II) NEOMAGIC(0): Removing mode (576x432) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1280x960) larger than the LCD panel (1024x76
(II) NEOMAGIC(0): Not using default mode "1280x960" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "640x480" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (1280x1024) larger than the LCD panel (1024x76
(II) NEOMAGIC(0): Not using default mode "1280x1024" (unknown reason)
(II) NEOMAGIC(0): Removing mode (640x512) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (640x512) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (640x512) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) NEOMAGIC(0): Removing mode (896x672) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "896x672" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) NEOMAGIC(0): Removing mode (928x696) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "928x696" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (832x624) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "832x624" (unknown reason)
(II) NEOMAGIC(0): Removing mode (416x312) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "416x312" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1152x76 larger than the LCD panel (1024x76
(II) NEOMAGIC(0): Not using default mode "1152x768" (unknown reason)
(II) NEOMAGIC(0): Removing mode (576x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "576x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (576x432) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Removing mode (700x525) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Removing mode (700x525) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Removing mode (700x525) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Removing mode (700x525) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1024" (width requires unsupported line pitch)
(II) NEOMAGIC(0): Removing mode (800x512) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "800x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) NEOMAGIC(0): Virtual size is 1024x768 (pitch 1024)
(**) NEOMAGIC(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NEOMAGIC(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) NEOMAGIC(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NEOMAGIC(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NEOMAGIC(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NEOMAGIC(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NEOMAGIC(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NEOMAGIC(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NEOMAGIC(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NEOMAGIC(0): Modeline "640x480"   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync
(==) NEOMAGIC(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0        0        0x70400000 - 0x704fffff (0x100000) MX[B]
        [1] 0        0        0x70000000 - 0x703fffff (0x400000) MX[B]
        [2] 0        0        0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
        [3] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [4] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [5] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [6] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [7] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [8] -1        0        0x50000000 - 0x500fffff (0x100000) MX[B]
        [9] -1        0        0x50100000 - 0x50100fff (0x1000) MX[B]
        [10] -1        0        0x50101000 - 0x501010ff (0x100) MX[B]
        [11] -1        0        0x40000000 - 0x3fffffff (0x0) MX[B]O
        [12] -1        0        0x70400000 - 0x704fffff (0x100000) MX[B](B)
        [13] -1        0        0x70000000 - 0x703fffff (0x400000) MX[B](B)
        [14] -1        0        0xe0000000 - 0xe1ffffff (0x2000000) MX[B](B)
        [15] 0        0        0x000a0000 - 0x000affff (0x10000) MS[B]
        [16] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [17] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[B]
        [18] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [19] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [20] -1        0        0x00004000 - 0x0000401f (0x20) IX[B]
        [21] -1        0        0x0000fcf0 - 0x0000fcff (0x10) IX[B]
        [22] -1        0        0x00004400 - 0x000044ff (0x100) IX[B]
        [23] -1        0        0x00004500 - 0x00004507 (0x8) IX[B]
        [24] 0        0        0x000003b0 - 0x000003bb (0xc) IS[B]
        [25] 0        0        0x000003c0 - 0x000003df (0x20) IS[B]
(==) NEOMAGIC(0): Write-combining range (0xe0000000,0x400000)
(II) NEOMAGIC(0): Stretching disabled
(II) NEOMAGIC(0): Using linear framebuffer at: 0xE0000000
(--) NEOMAGIC(0): 2621440 bytes off-screen memory available
(II) NEOMAGIC(0): Using H/W Cursor.
(II) NEOMAGIC(0): Using 256 scanlines of offscreen memory
(II) NEOMAGIC(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        Solid Horizontal and Vertical Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                16 128x128 slots
(II) NEOMAGIC(0): Acceleration  Initialized
(==) NEOMAGIC(0): Backing store disabled
(==) NEOMAGIC(0): Silken mouse enabled
(**) Option "dpms"
(**) NEOMAGIC(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "PS/2"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) DevInputMice: Protocol: "IMPS/2"
(**) Option "AlwaysCore"
(**) DevInputMice: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) DevInputMice: ZAxisMapping: buttons 4 and 5
(**) DevInputMice: Buttons: 5
(II) XINPUT: Adding extended input device "DevInputMice" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Error loading keymap /var/tmp/server-0.xkm
Couldn't load XKB keymap, falling back to pre-XKB keymap
(II) Server_Terminate keybinding not found
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) DevInputMice: ps2EnableDataReporting: succeeded
Could not init font path element unix/:7100, removing from list!

Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [email protected].
回复

使用道具 举报

发表于 2004-3-17 19:39:55 | 显示全部楼层
空间太小了。
回复

使用道具 举报

 楼主| 发表于 2004-3-17 19:42:46 | 显示全部楼层
问题是空间应该还有至少60M。
回复

使用道具 举报

发表于 2004-3-17 19:52:54 | 显示全部楼层
60M很多吗?
回复

使用道具 举报

发表于 2004-3-17 20:27:02 | 显示全部楼层
同意!
回复

使用道具 举报

发表于 2004-3-17 20:59:01 | 显示全部楼层
[code:1]2004年03月17日下午20时56分09秒[root@home root]# df -h
文件系统              容量  已用 可用 已用% 挂载点
/dev/hda8             3.4G  2.7G  554M  83% /[/code:1]

操作系统要留一部分自用。
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-9-29 19:19 , Processed in 0.073578 second(s), 15 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表