请教：2.6.4可以使用音量控制，但检测不到声卡？

xiaobin

未升级前，在fedora 1用得好好的，升级至2.6.4后，在2.6.4中“检测声卡”时得到以下信息(我的是技嘉845G-8IRE集成声卡)：
声卡：intel corp(销售商)
型号：82801BA/BAM 'AC97 Audio
模块：i810-audio
但如果点播放测试声音，以下错误提示：
The i810_audio driver could not be loaded.  This soundcard may not be compatible with Red Hat Linux.
但是任务栏右下角的小喇叭又可打开音量控制，内有Dummy _mixer  and  mixer10 两个选项卡，Dummy _mixer选项卡可以调节音量，但mixer10卡下是空白的。
这是怎么回事？
在配置时，我已把ALSA选 项写入内核了:进入Sound，把sound card support选上，选择底下的ALSA,进入PCI devices,选择声卡类型：intel i8*0/MX，这边选错了吗？如是，应怎么改(不重新编译的情况下，我可是受过了，弄了三次才出来那个小喇叭)？
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
.
.
.

# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
CONFIG_SND_DEBUG_DETECT=y

#
# Generic devices
#
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
CONFIG_SND_MTPAV=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y                 我选的是这一行，有没错
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

xiaobin

怎么没人回复啊，急死了。

xiaobin

重新搞了一回，选OSS，升级完毕后运行升卡检测，还是提示The i810_audio driver could not be loaded.  This soundcard may not be compatible with Red Hat Linux.，点确定，却又可以听到测试的声音，在XMMS、Mplayer也可发声，也可调节音量，真是怪事年年有，Linux特别多！妈个逼的，能用的就行，不管它，先搞我的Nvidia显卡吧。

黑色阳光

嘿嘿

黑色阳光

我搞定了。嘿嘿！

风继续吹

楼上的怎么搞定的，说一下撒，我的问题也相似，不过是sis的集成声卡，编译内核的时候选择的oss，错误信息和楼主一样，模块也是i810_audio。

黑羽

我的不能发声啊　黑色阳光说说是怎么搞定的？

linuxpgy

一个小建议:如果内核怎么编译也没声音的话,干脆在编译时不支持声卡!!
从网上下载驱动:
http://www.opensound.com/download.cgi
oss驱动支持很多声卡,也许就有你的声卡型号!!! (在编译时一定要选不支持声卡)
注意选择的内核版本号.我就是这样找到我的声卡ES1869的.

黑色阳光

买块硬声卡算了。     
我的才八十块大洋。

这样方法实在不好意思说。     

neptune

Have you write " modprobe snd-intel8x0 " into rc.local ?
Run "lsmod" to see wether the module has been load.
-----------------------------------------------
I think maybe the sound card config program does not work with the kernel which is not installed by Fedora RPM package.