undefinstr 0.7.7

dengyl

skyeye 0.7.7,testsuits/xscale/linx-2.4.x核心，rootfs用的lubbock开发板上用的。
挂接ramdisk后，skyeye提示undefinstr错误(instr eca0420c)，虚拟机可以进入系统提示符，但是运行ls命令会出现segmentation fault。
查看代码，似乎是一个没有实现的特征？请问chy,这会造成什么影响？为什么testsuits中的ramdisk不会有这个问题？我想可能是编译器或者是编译选项的问题？

void
ARMul_STC (ARMul_State * state, ARMword instr, ARMword address)
{

  if (cpab == ARMul_CANT)
    {
      printf("SKYEYE ARMul_STC,CANT, undefinstr,  CPnum is %x, instr %x, addr %x\n",CPNum, instr, address);
      CPTAKEABORT;
      return;
    }

chyyuu

我觉得是编译器的问题。建议用
ftp://166.111.68.183/pub/embed/armlinux/xscale/xscale-gcc-3.3.3。。。。
的编译器试试。

dengyl

ftp://166.111.68.183/上不去啊！有没有其它的镜像？

dengyl

[quote:dc64010ce9="chyyuu"]我觉得是编译器的问题。建议用
ftp://166.111.68.183/pub/embed/armlinux/xscale/xscale-gcc-3.3.3。。。。
的编译器试试。[/quote]

用chy提供的xscale-gcc-3.3.3在redhat9上编译kernel linux-2.4.19-rmk7-pxa2，rootfs使用的是testsuits/xscale/linux-2.4.x/initrd4M.img，在skyeye上kernel本身启动没有问题，但是mount rootfs后，出现错误。希望斑竹能抽时间解答，感谢！

启动信息如下：
(SkyEye) r
Starting program:
warning: No executable file specified.
warning: No program loaded.
Uncompressing Linux....................................... done, booting the kernel.
Linux version 2.4.19-rmk7-pxa2 ([email protected]) (gcc version 3.3.3) #5 Mon Aug 2 01:35:37 EDT 2004
CPU: XScale-PXA250 revision 0
Machine: Intel DBPXA250 Development Platform
Ignoring unrecognised tag 0x00000000
Memory clock: 99.53MHz (*27)
Run Mode clock: 99.53MHz (*1)
Turbo Mode clock: 99.53MHz (*1.0, inactive)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: mem=32M root=/dev/ram ramdisk=8192 initrd_start=0xc1000000 console=ttyS0,115200
Console: colour dummy device 80x30
Calibrating delay loop... 7.29 BogoMIPS
Memory: 32MB = 32MB total
Memory: 31060KB available (980K code, 264K data, 72K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Disabling CPU frequency change support.
CPU clock: 0.000 MHz (0.000-0.000 MHz)
Starting kswapd
Console: switching to colour frame buffer device 80x30
Keyboard interface test failed[1]: 00
Keyboard interface test failed[2]: 00
Keyboard interface test failed[3]: 00
initialize_kbd: Keyboard reset failed, no ACK
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0 with no serial options enabled
ttyS00 at 0x0000 (irq = 15) is a PXA UART
ttyS01 at 0x0000 (irq = 14) is a PXA UART
ttyS02 at 0x0000 (irq = 13) is a PXA UART
SA1100 Real Time Clock driver v1.00
rtc: warning: initializing default clock divider/trim value
Keyboard timed out[1]
keyboard: Timeout - AT keyboard not present?
Keyboard timed out[1]
keyboard: Timeout - AT keyboard not present?
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
LAN91x: not found.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 4096 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 1032192K
VFS: Mounted root (ext2 filesystem) readonly.
Freeing init memory: 72K
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800 e24cb004 (ee303110)
init (1): undefined instruction: pc=00036c9c
Code: e91ba800 e1a0c00d e92dd800
Program received signal SIGINT, Interrupt.
No program loaded.
0xc00fd748 in ?? ()
(SkyEye)

核心配置：
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_ARM=y
# CONFIG_EISA is not set
# CONFIG_SBUS is not set
# CONFIG_MCA is not set
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_GENERIC_BUST_SPINLOCK is not set
# CONFIG_GENERIC_ISA_DMA is not set

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_OBSOLETE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KMOD is not set

#
# System Type
#
# CONFIG_ARCH_ANAKIN is not set
# CONFIG_ARCH_ARCA5K is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_OMAHA is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_MX1ADS is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_RISCSTATION is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_AT91RM9200DK is not set

#
# Archimedes/A5000 Implementations
#
# CONFIG_ARCH_ARC is not set
# CONFIG_ARCH_A5K is not set

#
# Footbridge Implementations
#
# CONFIG_ARCH_CATS is not set
# CONFIG_ARCH_PERSONAL_SERVER is not set
# CONFIG_ARCH_EBSA285_ADDIN is not set
# CONFIG_ARCH_EBSA285_HOST is not set
# CONFIG_ARCH_NETWINDER is not set

#
# SA11x0 Implementations
#
# CONFIG_SA1100_ACCELENT is not set
# CONFIG_SA1100_ASSABET is not set
# CONFIG_ASSABET_NEPONSET is not set
# CONFIG_SA1100_ADSAGC is not set
# CONFIG_SA1100_ADSBITSY is not set
# CONFIG_SA1100_ADSBITSYPLUS is not set
# CONFIG_SA1100_BRUTUS is not set
# CONFIG_SA1100_CEP is not set
# CONFIG_SA1100_CERF is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_H3XXX is not set
# CONFIG_H3600_SLEEVE is not set
# CONFIG_SA1100_EXTENEX1 is not set
# CONFIG_SA1100_FLEXANET is not set
# CONFIG_SA1100_FREEBIRD is not set
# CONFIG_SA1100_FRODO is not set
# CONFIG_SA1100_GRAPHICSCLIENT is not set
# CONFIG_SA1100_GRAPHICSMASTER is not set
# CONFIG_SA1100_HACKKIT is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HUW_WEBPANEL is not set
# CONFIG_SA1100_ITSY is not set
# CONFIG_SA1100_LART is not set
# CONFIG_SA1100_NANOENGINE is not set
# CONFIG_SA1100_OMNIMETER is not set
# CONFIG_SA1100_PANGOLIN is not set
# CONFIG_SA1100_PLEB is not set
# CONFIG_SA1100_PT_SYSTEM3 is not set
# CONFIG_SA1100_SHANNON is not set
# CONFIG_SA1100_SHERMAN is not set
# CONFIG_SA1100_SIMPAD is not set
# CONFIG_SA1100_SIMPUTER is not set
# CONFIG_SA1100_PFS168 is not set
# CONFIG_SA1100_VICTOR is not set
# CONFIG_SA1100_XP860 is not set
# CONFIG_SA1100_YOPY is not set
# CONFIG_SA1100_USB is not set
# CONFIG_SA1100_USB_NETLINK is not set
# CONFIG_SA1100_USB_CHAR is not set
# CONFIG_SA1100_SSP is not set

#
# Intel PXA250/210 Implementations
#
CONFIG_ARCH_LUBBOCK=y
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_ARCH_PXA_CERF is not set
# CONFIG_ARCH_TRIZEPS2 is not set
CONFIG_SA1111=y
CONFIG_PXA_USB=m
CONFIG_PXA_USB_NETLINK=m
CONFIG_PXA_USB_CHAR=m

#
# CLPS711X/EP721X Implementations
#
# CONFIG_ARCH_AUTCPU12 is not set
# CONFIG_ARCH_CDB89712 is not set
# CONFIG_ARCH_CLEP7312 is not set
# CONFIG_ARCH_EDB7211 is not set
# CONFIG_ARCH_FORTUNET is not set
# CONFIG_ARCH_GUIDEA07 is not set
# CONFIG_ARCH_P720T is not set
# CONFIG_ARCH_EP7211 is not set
# CONFIG_ARCH_EP7212 is not set
# CONFIG_ARCH_ACORN is not set
# CONFIG_FOOTBRIDGE is not set
# CONFIG_FOOTBRIDGE_HOST is not set
# CONFIG_FOOTBRIDGE_ADDIN is not set
CONFIG_CPU_32=y
# CONFIG_CPU_26 is not set
# CONFIG_CPU_ARM610 is not set
# CONFIG_CPU_ARM710 is not set
# CONFIG_CPU_ARM720T is not set
# CONFIG_CPU_ARM920T is not set
# CONFIG_CPU_ARM922T is not set
# CONFIG_PLD is not set
# CONFIG_CPU_ARM926T is not set
# CONFIG_CPU_ARM1020 is not set
# CONFIG_CPU_ARM1026 is not set
# CONFIG_CPU_SA110 is not set
# CONFIG_CPU_SA1100 is not set
CONFIG_CPU_32v5=y
CONFIG_CPU_XSCALE=y
# CONFIG_XSCALE_CACHE_ERRATA is not set
# CONFIG_CPU_32v3 is not set
# CONFIG_CPU_32v4 is not set
# CONFIG_DISCONTIGMEM is not set

#
# General setup
#
# CONFIG_PCI is not set
# CONFIG_ISA is not set
# CONFIG_ISA_DMA is not set
# CONFIG_ZBOOT_ROM is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CPU_FREQ=y
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# CONFIG_MMC is not set
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_XIP_KERNEL is not set
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE="mem=32M root=/dev/ram console=ttyS0,115200"
# CONFIG_LEDS is not set
# CONFIG_ALIGNMENT_TRAP is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_MTD is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set

#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_ARM_AM79C961A is not set
# CONFIG_ARM_CIRRUS is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
# CONFIG_ULTRAMCA is not set
# CONFIG_ULTRA is not set
# CONFIG_ULTRA32 is not set
# CONFIG_SMC9194 is not set
CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPPOE=y
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
# CONFIG_STRIP is not set
# CONFIG_WAVELAN is not set
# CONFIG_ARLAN is not set
# CONFIG_AIRONET4500 is not set
# CONFIG_AIRONET4500_NONCS is not set
# CONFIG_AIRONET4500_PROC is not set
CONFIG_HERMES=y
# CONFIG_NET_WIRELESS is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Input core support
#
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set

#
# Character devices
#
CONFIG_VT=y
# CONFIG_VT_CONSOLE is not set
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_ANAKIN is not set
# CONFIG_SERIAL_ANAKIN_CONSOLE is not set
# CONFIG_SERIAL_AMBA is not set
# CONFIG_SERIAL_AMBA_CONSOLE is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
# CONFIG_SERIAL_21285 is not set
# CONFIG_SERIAL_21285_OLD is not set
# CONFIG_SERIAL_21285_CONSOLE is not set
# CONFIG_SERIAL_UART00 is not set
# CONFIG_SERIAL_UART00_CONSOLE is not set
# CONFIG_SERIAL_SA1100 is not set
# CONFIG_SERIAL_SA1100_CONSOLE is not set
# CONFIG_SERIAL_OMAHA is not set
# CONFIG_SERIAL_OMAHA_CONSOLE is not set
# CONFIG_SERIAL_AT91US3 is not set
# CONFIG_SERIAL_AT91US3_CONSOLE is not set
# CONFIG_SERIAL_8250 is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# I2C support
#
# CONFIG_I2C is not set

#
# L3 serial bus support
#
# CONFIG_L3 is not set
# CONFIG_L3_ALGOBIT is not set
# CONFIG_L3_BIT_SA1100_GPIO is not set
# CONFIG_L3_SA1111 is not set
# CONFIG_BIT_SA1100_GPIO is not set

#
# Mice
#
CONFIG_BUSMOUSE=y
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_LOGIBUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_MK712_MOUSE is not set

#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_INPUT_NS558 is not set
# CONFIG_INPUT_LIGHTNING is not set
# CONFIG_INPUT_PCIGAME is not set
# CONFIG_INPUT_CS461X is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_INPUT_SERIO is not set
# CONFIG_INPUT_SERPORT is not set
# CONFIG_INPUT_ANALOG is not set
# CONFIG_INPUT_A3D is not set
# CONFIG_INPUT_ADI is not set
# CONFIG_INPUT_COBRA is not set
# CONFIG_INPUT_GF2K is not set
# CONFIG_INPUT_GRIP is not set
# CONFIG_INPUT_INTERACT is not set
# CONFIG_INPUT_TMDC is not set
# CONFIG_INPUT_SIDEWINDER is not set
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_INPUT_IFORCE_232 is not set
# CONFIG_INPUT_WARRIOR is not set
# CONFIG_INPUT_MAGELLAN is not set
# CONFIG_INPUT_SPACEORB is not set
# CONFIG_INPUT_SPACEBALL is not set
# CONFIG_INPUT_STINGER is not set
# CONFIG_INPUT_DB9 is not set
# CONFIG_INPUT_GAMECON is not set
# CONFIG_INPUT_TURBOGRAFX is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_PXA_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_CRAMFS_LINEAR is not set
# CONFIG_CRAMFS_LINEAR_XIP is not set
# CONFIG_ROOT_CRAMFS_LINEAR is not set
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
# CONFIG_ZLIB_FS_INFLATE is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set

#
# Console drivers
#
CONFIG_PC_KEYMAP=y
# CONFIG_VGA_CONSOLE is not set

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_ACORN is not set
# CONFIG_FB_ANAKIN is not set
# CONFIG_FB_CLPS711X is not set
# CONFIG_FB_SA1100 is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_8BPP is not set
CONFIG_FB_PXA_16BPP=y
# CONFIG_FB_PXA_QVGA is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB2=y
CONFIG_FBCON_CFB4=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_FONTWIDTH8_ONLY=y
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# Multimedia Capabilities Port drivers
#
# CONFIG_MCP is not set
# CONFIG_MCP_SA1100 is not set
# CONFIG_MCP_UCB1200 is not set
# CONFIG_MCP_UCB1200_AUDIO is not set
# CONFIG_MCP_UCB1200_TS is not set
# CONFIG_MCP_UCB1400_TS is not set

#
# USB support
#
# CONFIG_USB is not set

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Kernel hacking
#
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_INFO=y
# CONFIG_NO_PGT_CACHE is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_DC21285_PORT is not set
# CONFIG_DEBUG_CLPS711X_UART2 is not set

skyeye.conf:

[root@localhost pxaLinux]# cat skyeye.conf
cpu: xscale
mach: pxa_lubbock
mem_bank: map=I, type=RW, addr=0x40000000, size=0x0c000000
mem_bank: map=M, type=RW, addr=0xa0000000, size=0x00200000
mem_bank: map=M, type=RW, addr=0xa0200000, size=0x00100000, file=zImage, boot=yes
mem_bank: map=M, type=RW, addr=0xa0300000, size=0x00d00000
mem_bank: map=M, type=RW, addr=0xa1000000, size=0x00800000, file=./initrd4M.img
mem_bank: map=M, type=RW, addr=0xa1800000, size=0x02800000

chyyuu

Freeing initrd memory: 1032192K
..............
这行显示有问题，建议看看testsuit提供的显示信息,并对照一下，
我记得还打了一个补丁。