QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 843|回复: 13

又遇新问题

[复制链接]
发表于 2004-8-17 11:59:54 | 显示全部楼层 |阅读模式
我用Hiweed-debian桌面版。发现不能上网,Xfce中没有配置ADSL的地方,不知道从Linux终端怎么配置?PPPoE。连apt-get命令都没有用,气死我,似乎这个内核不支持PPPoE,真是奇怪
发表于 2004-8-17 12:10:06 | 显示全部楼层
pppoeconf
回复

使用道具 举报

 楼主| 发表于 2004-8-17 12:51:11 | 显示全部楼层
运行了,出现
I Found 1 device(s),
eth0
Are all your ethernet interfaces listed above?(If No,modconf will be started so you can load the card drivers manually)
然后我选Yes,一小会儿后出现:
Sorry,I scanned 1 interface(s). But the Access Conncentrator or your provider did not respond. Please check your network and modem cables. Another reason for the scan failure may also be another running pppoe process which controls the modem.

设置失败。我用的是小区宽带,在Windows下用的是PPPoE拨号并且分到公有IP地址,请问接下来该怎么做(刚装完Debian没有装其它任何程序,一开机马上运行Xfce并且运行pppoeconf

哪位朋友能帮我解决这个问题,我感激不尽了。
回复

使用道具 举报

发表于 2004-8-17 13:03:29 | 显示全部楼层

小区宽带没用过~
回复

使用道具 举报

 楼主| 发表于 2004-8-17 13:08:32 | 显示全部楼层
和ADSL的性质完全一样,教教我吧
回复

使用道具 举报

发表于 2004-8-17 13:20:03 | 显示全部楼层
运行 pppoeconf,自动检测连接 ADSL 的网卡,然后输入相应的参数,如用户名,密码等等,然后就可以使用 pon 命令进行连接 Internet 了。

生成的配置文件在:
/etc/ppp/peers/dsl-provider

要拨号只要pon dsl-provider就可以了~

小区宽带不是很清楚~
回复

使用道具 举报

 楼主| 发表于 2004-8-17 13:23:37 | 显示全部楼层
Sorry,I scanned 1 interface(s). But the Access Conncentrator or your provider did not respond. Please check your network and modem cables. Another reason for the scan failure may also be another running pppoe process which controls the modem.

可它出现的是这个,没有什么地方可以输入相应的参数啊
回复

使用道具 举报

发表于 2004-8-17 13:32:48 | 显示全部楼层
试试rp-pppoe.这个简单点
回复

使用道具 举报

 楼主| 发表于 2004-8-17 13:49:40 | 显示全部楼层
这个命令能运行吗?我可不想来来回回跑Debian和Win
回复

使用道具 举报

发表于 2004-8-17 13:54:14 | 显示全部楼层

rp-pppoe在hiweed里面有些麻烦,因为hiweed里面只有一个gcc,其他的东西省掉了~
回复

使用道具 举报

发表于 2004-8-17 13:56:54 | 显示全部楼层
rp-pppoe在hiweed里面有些麻烦,因为hiweed里面只有一个gcc,其他的东西省掉了

那下载个tar包,有gcc的话可以重新编译一下的啊
Another reason for the scan failure may also be another running pppoe process which controls the modem.

还有可以用ps -aux | grep ppp 看一下,是不是还有其他的ppp进程
回复

使用道具 举报

 楼主| 发表于 2004-8-17 14:13:26 | 显示全部楼层
大家弄来弄去最后还是我解决了问题。我最终使用了ifconfig命令给网卡定义了IP地址和子网掩码后才能起用pppoeconf命令的,唉,晕,怎么不早想一到一点呢
回复

使用道具 举报

发表于 2004-8-17 15:14:52 | 显示全部楼层
  
恭喜恭喜~
回复

使用道具 举报

发表于 2004-8-17 22:01:04 | 显示全部楼层
大家弄来弄去最后还是我解决了问题。

这就是linux嘛,自己动手,丰衣足食
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-10-5 08:27 , Processed in 0.046325 second(s), 15 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表