关于PearPC的最优化配置

lovewilliam

RT

这是我的配置，

很慢，

那位达淫贴一下最优化的，

小弟在此一拜

[code:1][root@Lover PearPC]# cat config.conf
## PearPC Configuration File

##
## Start Resolution
##
## (clients that use video.x can change the resolution at runtime,
##  so this would be used only for starting up)
##
##      format:  "(width)x(height)x(depth)"
##          or   "(width)x(height)x(depth)@(frequency)"
##
##      depth can only be 15 or 32
##
##      default: "800x600x15"
##

ppc_start_resolution = "800x600x32"

##
## Redraw interval (in ms)
## must be between 10 and 500
##
## If you set this higher, PearPC will spend less time doing redraws (and so run faster)
## but feel less responsive. You should adjust this to your computer speed and personal
## preference.
##

redraw_interval_msec = 500

##
## Key codes
##

key_toggle_mouse_grab = "F12"

key_toggle_full_screen = "Alt+Return"


##
## Loader
##

##
##      Boot method
##        this can be
##        1. "auto", prom will boot the first bootable partition found (default)
##        2. "select", prom will show you a list of bootable partitions
##        3. "force", prom will load and boot the local file prom_loadfile
##

prom_bootmethod = "auto"

## Example of how to use "force":

#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"

##
##      bootargs: don't change unless you know what you are doing
##      machargs: set to "-v" to get a verbose startup
##

#prom_env_bootargs = ""
#prom_env_machargs = "-v"


##
##      This is needed if you want to boot Mac OS X
##
prom_driver_graphic = "video.x"

## This will adjust the position of the initial page table (don't change)

#page_table_pa = 104857600

##
## CPU Config
##
##      Processor Version Register
##      Defaults to 0x00088302
##      Only change if you know want you are doing
##

#cpu_pvr = 0x00088302


##
## Main memory (default 128 MiB)
## must be >= 64 MiB
##

#memory_size=0x8000000

##
## IO Devices
##

##
##      PCI IDE Config
##
##      Drive type will be set according to file extension:
##              .img: Harddisk (filesize must be multiple of 516096)
##              .iso: CD-Rom
##      Or you can override this by specifying the type via
##      pci_ide0_master_type / pci_ide0_slave_type

pci_ide0_master_installed = 1
pci_ide0_master_image = "/mnt/root/ppc/mac.img"
#pci_ide0_master_type = "hd"

pci_ide0_slave_installed = 0
#pci_ide0_slave_image = "/mnt/Backup_4/iso/MacOSX/Mac.OSX.V10.3.Phanter/Mac.OSX.V10.3.Phanter.Disc1.ISO"
pci_ide0_slave_image = "/dev/hdc"
pci_ide0_slave_type = "cdrom"

##
##      Network
##
##      Choose one of the cards

pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"

pci_rtl8139_installed = 1
pci_rtl8139_mac = "de:ad:ca:fe:12:35"

##
##      USB
##
pci_usb_installed = 1

##
##      NVRAM
##
nvram_file = "nvram"
[root@Lover PearPC]# [/code:1]

caihua

鼓励积极分子，再一下

Mandrake

把色深改成15,内存加大一点试试看吧。估计性能跟配置不会差太多吧。

lovewilliam

汗……

我的RAM只有128M……

跑Mac 7.5很快，但是这个……

Mandrake

[quote:f5c045acee="lovewilliam"]汗……

我的RAM只有128M……

跑Mac 7.5很快，但是这个……[/quote]汗，128的内存也玩虚拟mac

caihua

所以叫弓虽嘛

lovewilliam

汗……

弓虽…弓虽………

lanche

别拜了，折杀人啦！

tingxx

我想请问一下：你们用这个模拟器，从哪得到mac的系统光盘呀？？

lovewilliam

PearPC的官方站点上有i㎎

tingxx

哦，那我也去试试，