我怎么才能安装上 prozgui????

lhb78176 · 发表于 2004-10-31 19:02:53

我安装的过程：
[root@localhost tool]# ls

prozgui-2.0.4-2.i386.rpm
fltk-1.0.11-7.i386.rpm
fltk-1.1.5-1.1.fc1.dries.i386.rpm
libstdc++-2.10.0-30.i386.rpm
[root@localhost tool]# rpm -ivh prozgui-2.0.4-2.i386.rpm warning: prozgui-2.0.4-2.i386.rpm: V3 DSA signature: NOKEY, key ID f9651d5a
error: Failed dependencies:
      libfltk.so.1 is needed by prozgui-2.0.4-2
      libstdc++.so.2.10 is needed by prozgui-2.0.4-2
      fltk is needed by prozgui-2.0.4-2

[root@localhost tool]# rpm -ivh fltk-1.1.5-1.1.fc1.dries.i386.rpm
warning: fltk-1.1.5-1.1.fc1.dries.i386.rpm: V3 DSA signature: NOKEY, key ID 1aa78495
Preparing...             ########################################### [100%]
1:fltk                ########################################### [100%]
[root@localhost tool]# rpm -ivh prozgui-2.0.4-2.i386.rpm
warning: prozgui-2.0.4-2.i386.rpm: V3 DSA signature: NOKEY, key ID f9651d5a
error: Failed dependencies:
      libfltk.so.1 is needed by prozgui-2.0.4-2
      libstdc++.so.2.10 is needed by prozgui-2.0.4-2
[root@localhost tool]#
[root@localhost tool]#
[root@localhost tool]#
[root@localhost tool]# rpm -ivh fltk-1.0.11-7.i386.rpm
warning: fltk-1.0.11-7.i386.rpm: V3 DSA signature: NOKEY, key ID f9651d5a
error: Failed dependencies:
      OpenGL is needed by fltk-1.0.11-7
[root@localhost tool]# rpm -ivh libstdc++-2.10.0-30.i386.rpm
warning: libstdc++-2.10.0-30.i386.rpm: V3 DSA signature: NOKEY, key ID f9651d5a
Preparing...             ########################################### [100%]
      package libstdc++-3.3.2-1 (which is newer than libstdc++-2.10.0-30) is already installed
[root@localhost tool]# rpm -ivh prozgui-2.0.4-2.i386.rpm
warning: prozgui-2.0.4-2.i386.rpm: V3 DSA signature: NOKEY, key ID f9651d5a
error: Failed dependencies:
      libfltk.so.1 is needed by prozgui-2.0.4-2
      libstdc++.so.2.10 is needed by prozgui-2.0.4-2
[root@localhost tool]# libstdc++-2.10.0-30.i386.rpm
bash: libstdc++-2.10.0-30.i386.rpm: command not found
[root@localhost tool]# libstdc++-2.10.0-30.i386.rpm
bash: libstdc++-2.10.0-30.i386.rpm: command not found
[root@localhost tool]# rpm -ivh libstdc++-2.10.0-30.i386.rpm
warning: libstdc++-2.10.0-30.i386.rpm: V3 DSA signature: NOKEY, key ID f9651d5a
Preparing...             ########################################### [100%]
      package libstdc++-3.3.2-1 (which is newer than libstdc++-2.10.0-30) is already installed
[root@localhost tool]# rpm -ivh prozgui-2.0.4-2.i386.rpm
warning: prozgui-2.0.4-2.i386.rpm: V3 DSA signature: NOKEY, key ID f9651d5a
error: Failed dependencies:
      libfltk.so.1 is needed by prozgui-2.0.4-2
      libstdc++.so.2.10 is needed by prozgui-2.0.4-2
[root@localhost tool]# rpm -ivh prozgui-2.0.4-2.i386.rpm
warning: prozgui-2.0.4-2.i386.rpm: V3 DSA signature: NOKEY, key ID f9651d5a
error: Failed dependencies:
      libfltk.so.1 is needed by prozgui-2.0.4-2
      libstdc++.so.2.10 is needed by prozgui-2.0.4-2
[root@localhost tool]#
我已经想了很多办法了，它需要的关联软件我也装上去了，(或者就是装不上去)
谁有完整包给我用用啊。我要阿！谢谢了。

troll · 发表于 2004-10-31 19:06:40

同情。你看看fox-eagle2003的签名档，用apt工具。或者系统自带的yum，也起到类似作用，能解决依赖性问题。具体使用还是那句话，搜索论坛，有问题再来问。

lhb78176 · 发表于 2004-10-31 19:08:05

某些相关联的包忽略，是否影响该软件的正常运行！

lhb78176 · 发表于 2004-10-31 19:12:42

yum怎么个用法？可否说说！！谢先！

troll · 发表于 2004-10-31 19:14:14

yum update
yum install xxx

troll · 发表于 2004-10-31 19:15:27

proz这个东西不用gui就很好，干吗非要gui。

lhb78176 · 发表于 2004-10-31 19:17:24

我要搜索软件名叫什么就是proz么？

troll · 发表于 2004-10-31 19:21:47

proz不在官方软件源中，你可以把freshrpms 和 fedora.us加入yum.conf，或者到freshrpms下载一个apt，使用apt，在安装freshrpms的apt的同时，它会把freshrpms添加到yum.conf中去，这样你也可以用yum安装freshrpms的软件了。

lhb78176 · 发表于 2004-10-31 19:22:39

yum工具是个系统更新软件吧。你说的 yum install xxx这个什么意思，
它可以安装软件？rpm和tar.bz都可以么？我理解错了？请原谅！谢谢

troll · 发表于 2004-10-31 19:26:11

可以用它进行系统跟新，但也可以用来安装缺少的软件，只能安装rpm，不能下载源码包。

lhb78176 · 发表于 2004-10-31 19:31:51

freshrpms 和 fedora.us这两个什么咚咚？我的yum.conf文件里没有这个。是不是要自己加上去了？怎样加？谢谢！

troll · 发表于 2004-10-31 19:33:01

你到这两个网站去看看，上面有的，别告诉我找不到它们哦。

lhb78176 · 发表于 2004-10-31 19:37:51

2 修改 /etc/yum.conf，加入如下几行：

------------------------------------------------------------
[2.6testkernels]
name=Test Linux 2.6-test prerelease kernels for RHL9/rawhide
baseurl=http://people.redhat.com/arjanv/2.5/

[os]
name=Red Hat Linux Rawhide - $basearch - os
baseurl=http://ayo.freshrpms.net/redhat/rawhide/$basearch/os

[freshrpms]
name=Red Hat Linux 9 - $basearch - freshrpms
baseurl=http://ayo.freshrpms.net/redhat/9/$basearch/freshrpms
那我的 yum.conf没有这三项，那我要怎样加进去？是不是把red hat linux 9改成fedora core???

troll · 发表于 2004-10-31 19:41:23

不对你那个一个是升级内核的，一个是redhat 9的，不适用。

lhb78176 · 发表于 2004-10-31 19:43:27

请看看我的 yum.conf
[main]
cachedir=/var/cache/yum
debuglevel=2
logfile=/var/log/yum.log
pkgpolicy=newest
distroverpkg=fedora-release
tolerant=1
exactarch=1

[base]
name=Fedora Core $releasever - $basearch - Base
baseurl=http://fedora.redhat.com/releases/fedora-core-$releasever

[updates-released]
name=Fedora Core $releasever - $basearch - Released Updates
baseurl=http://fedora.redhat.com/updates/released/fedora-core-$releasever

#[updates-testing]
#name=Fedora Core $releasever - $basearch - Unreleased Updates
#baseurl=http://fedora.redhat.com/updates/testing/fedora-core-$releasever
我要做哪些修改才完整了？？

		自动登录	找回密码
密码			注册