一切顺利，but。。。。。

mustcan

安装skyeye很顺利
运行的时候target sim ,load .都对。
但是run不起来，怎么回事？

[root@localhost uClinux-dist]# skyeye linux-2.4.x/linux
***************************************************************
****                                                       ****
****   SkyEye  Simulator Ver 0.8.0 with  GDB 5.3 Interface ****
****                                                       ****
***************************************************************
GNU gdb 5.3
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf"...
(SkyEye) target sim
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x813e044
SKYEYE: use arm7100 mmu ops
Loaded ROM ./boot.rom
Connected to the simulator.
(SkyEye) load
Loading section .init, size 0xa000 vma 0x1000000
Loading section .text, size 0xce9b0 vma 0x100a000
Loading section .data, size 0x8854 vma 0x10da000
Start address 0x1000000
Transfer rate: 7376928 bits in <1 sec.
(SkyEye) run
Starting program: /home/skyeye/uClinux-dist/linux-2.4.x/linux

zhaotan

skyeye.conf配置正确吗？最好把linux，skyeye.conf，boot.rom放在一个目录下执行

mustcan

我是把它们放在一个目录下。
能帮忙看看skyeye.conf对不对吗?
cpu: arm7tdmi
mach: at91
mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000
mem_bank: map=M, type=RW, addr=0x01000000, size=0x00400000
mem_bank: map=M, type=R, addr=0x01400000, size=0x00400000, file=images/romfs.img
mem_bank: map=M, type=RW, addr=0x02000000, size=0x00400000
mem_bank: map=M, type=RW, addr=0x02400000, size=0x00008000
mem_bank: map=M, type=RW, addr=0x04000000, size=0x00400000
mem_bank: map=I, type=RW, addr=0xf0000000, size=0x10000000