|
|
发表于 2006-4-29 15:33:09
|
显示全部楼层
skyeye0.9.5.win32.rar，按照说明运行不成功，使用其中自带的LINUX，显示错误：
G:\embeded\simulator\skyeye\skyeye0.9.5.win32\skyeye.win32>set COS=windows
G:\embeded\simulator\skyeye\skyeye0.9.5.win32\skyeye.win32>bin\bash.exe skyeye.s
h
bash.exe: warning: could not find /tmp, please create!
windows
bin/skyinsight --nw --cd=G:/embeded/simulator/skyeye/skyeye0.9.5.win32/skyeye.wi
n32/demo-uclinux3 --command=G:/embeded/simulator/skyeye/skyeye0.9.5.win32/skyeye
.win32/.skyinit G:/embeded/simulator/skyeye/skyeye0.9.5.win32/skyeye.win32/demo-
uclinux3/linux
***********************************************************************
**** ****
**** SkyEye Simulator Ver 0.9.5 with GDB/Insight 5.3 Interface ****
**** ****
***********************************************************************
GNU gdb 5.3
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This SkyEye was configured as "--host=i686-pc-cygwin --target=arm-elf"...
(no debugging symbols found)...
target sim ...
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x4f8dd0
SKYEYE: use arm7100 mmu ops
Loaded ROM ./boot.rom
Connected to the simulator.
load ...
Loading section .init, size 0xa000 vma 0x1000000
Loading section .text, size 0xcfdb0 vma 0x100a000
Loading section .data, size 0x9154 vma 0x10da000
Start address 0x1000000
Transfer rate: 7436320 bits in <1 sec.
Type 'run' command to startup system ...
(SkyEye) run
Starting program: /cygdrive/g/embeded/simulator/skyeye/skyeye0.9.5.win32/skyeye.
win32/demo-uclinux3/linux
Linux version 2.4.20-uc0 ([email protected]) (gcc version 2.95.3 20010315 (release
)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(-msep-data patch
es)) #16 四 6月 5 10:19:33 CST 2003
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 12.97 BogoMIPS
Memory: 4MB = 4MB total
Memory: 2992KB available (831K code, 175K data, 40K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-14DDFFF [VIRTUAL 1400000-14DDFFF] (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
SkyEye NE2k Ethernet driver version 0.2 (2003-04-27)
sene2k dev name: eth0: <6>NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.
请问如何解决呢？
谢谢。 |
|
IP卡
狗仔卡
显身卡