ML 1.2f/2.0 下 ATI 显卡驱动安装详细功略

ys021662 · 发表于 2005-4-15 22:00:13

终于有新版的 ati linux 驱动了，新版 ati 驱动直接支持 2.6.12 内核，不需补丁：
Version: 8.16.20

https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folderID=300

直接安装 rpm 就可以成功。不过还是没有 XFree86 4.4 的版本，ML 还是必须使用 X.org。

第一次写文档，有什么错误和表达不清楚的地方还望兄弟们海涵。

1.下载xorg 6.8.2
由于ati没有提供xfree 4.4的驱动，所以只能提前倒向Xorg了

在这里下载xdot兄编译好的xorg 6.8.2
ftp://linux:[email protected]/xorg/rpms/i686/
或下载源码包重新编译。
ftp://61.131.63.205/xorg/srpms/
编译的问题参见
http://www.linuxfans.org/nuke/modules.php?name=Forums&file=viewtopic&t=113012&start=0&postdays=0&postorder=asc&highlight=

2.删除xfree的所有包
[code:1]
rpm -e XFree86-100dpi-fonts --nodeps
rpm -e XFree86 --nodeps
rpm -e XFree86-75dpi-fonts --nodeps
rpm -e XFree86-base-fonts --nodeps
rpm -e XFree86-cyrillic-fonts --nodeps
rpm -e XFree86-devel --nodeps
rpm -e XFree86-font-utils --nodeps
rpm -e XFree86-ISO8859-14-100dpi-fonts --nodeps
rpm -e XFree86-ISO8859-14-75dpi-fonts --nodeps
rpm -e XFree86-ISO8859-15-100dpi-fonts --nodeps
rpm -e XFree86-ISO8859-15-75dpi-fonts --nodeps
rpm -e XFree86-ISO8859-2-100dpi-fonts --nodeps
rpm -e XFree86-ISO8859-2-75dpi-fonts --nodeps
rpm -e XFree86-ISO8859-9-100dpi-fonts --nodeps
rpm -e XFree86-ISO8859-9-75dpi-fonts --nodeps
rpm -e XFree86-libs --nodeps
rpm -e XFree86-libs-data --nodeps
rpm -e XFree86-Mesa-libGL --nodeps
rpm -e XFree86-Mesa-libGLU --nodeps
rpm -e XFree86-tools --nodeps
rpm -e XFree86-truetype-fonts --nodeps
rpm -e XFree86-twm --nodeps
rpm -e XFree86-xauth --nodeps
rpm -e XFree86-xdm --nodeps
rpm -e XFree86-xfs --nodeps
rpm -e XFree86-Xnest --nodeps
rpm -e XFree86-Xvfb --nodeps
[/code:1]
（好像可以用rpm一次删除吧？不过我不知道弄，那位大大指点一下

）

3.安装xorg
[code:1]rpm -ivh xorg*.rpm --force --nodeps [/code:1]
startx
起不来？不要紧，重新安装一下所有font包就好！（

）
[code:1]rpm -ivh xorg*-fonts-6.8.2-1mgc.i686.rpm --force --nodeps  [/code:1]
如果x启动变慢可以[code:1]fc-cache[/code:1]
装上xorg输入法与konqeuror有冲突，请在此下载最新的kde-base
http://www.magiclinux.org/people/kanker/kde/3.4.0/rpms/

4.安装ATI显卡驱动包
http://www2.ati.com/drivers/linux/fglrx_6_8_0-8.12.10-1.i386.rpm
[code:1]rpm -ivh fglrx_6_8_0-8.12.10-1.i386.rpm --force --nodeps[/code:1]

5.重新编译内核
[code:1]
cd /usr/src/linux
ln -sf /boot/config-2.6.9 .config
make oldconfig
make menuconfig
[/code:1]
确保如下几项
[code:1]
Loadable module support -> Enable loadable module support: ENABLED
Loadable module support -> Module unloading: ENABLED
Loadable module support -> Automatic kernel module loading: ENABLED
（这几个与模块有关的,Magic应该已经包含了:P）
[/code:1]
[code:1]
Processor type and features -> MTRR (Memory Type Range Register) support: ENABLED
（这项如果不加，驱动会很慢）
Device drivers -> Character Devices -> /dev/agpgart (AGP Support): ENABLED OR MODULE

（这项如果编译成模块，在xorg中要将"UseInternalAGPGART"段设为"no"）
Device drivers -> Character Devices -> ( 在 /dev/agpgart下面选择与你主板对应的 AGP项)ENABLED OR MODULE
如
<*> /dev/agpgart (AGP Support)
  < > ATI chipset support  （ATI的芯片组）
  < > Intel 440LX/BX/GX, I8xx and E7x05 chipset support （Inter芯片组）
  < > Intel i865 chipset support    （Intel i865芯片组）
  < > NVIDIA nForce/nForce2 chipset support （nForce芯片组）
  < > VIA chipset support （VIA的芯片组）

  Device drivers -> Character Devices -> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support): DISABLED
[/code:1]
编译安装
[code:1]make
make modules_install
make install[/code:1]

6.编译显卡驱动

如果内核是2.6.10以后的版本，请给驱动打下面两个两个补丁（见附件）
将补丁拷到/lib/modules/fglrx/build_mod/
[code:1]
cd /lib/modules/fglrx/build_mod/
patch -p0<p1.patch
patch -p0<p2.patch[/code:1]

[code:1]
cd /lib/modules/fglrx/build_mod/

sh make.sh
cd ..
sh make_install.sh
[/code:1]

7.配置显卡驱动
如果一切顺利就可以开始配置驱动了！
[code:1]fglrxconfig[/code:1]
照着你的硬件配置就行了，具体参见
http://www.linuxfans.org/nuke/modules.php?name=Forums&file=viewtopic&t=25497&highlight=%CF%D4%BF%A8
我就不赘述了！（附上我的xorg.conf，见附件）

然后就是startx看能不能起来了！

[code:1]startx[/code:1]

8.我遇到的问题
至此驱动已经安装完毕，如无意外应该可以使用了！但在这里我遇到两个问题
问题一.3D加速没有打开
表现
[code:1]
glxgears依然只有222.400 FPS
fgl_glxgears报错
[root@MagicLinux ~]# fgl_glxgears
X Error of failed request: BadLength (poly request too large or internal Xlib length error)
Major opcode of failed request: 16 (X_InternAtom)
Serial number of failed request: 36
Current serial number in output stream: 38
[/code:1][code:1]
[root@MagicLinux ~]# fglrxinfo 结果如下
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
[/code:1]
[code:1]
[root@MagicLinux ~]#glxinfo | grep direct 结果如下
direct rendering: no
[/code:1]

lsmod发现fglrx模块已经加载
fglrx 215676 7

解决办法
[code:1]ldd `which glxinfo`[/code:1]

      linux-gate.so.1 =>  (0xffffe000)
      libGLU.so.1 => /usr/X11R6/lib/libGLU.so.1 (0xb7f70000)
      libGL.so.1 => /usr/X11R6/lib/libGL.so.1 (0xb7ecc000)

      libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0xb7ebe000)
      libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0xb7dd9000)
      libpthread.so.0 => /lib/tls/libpthread.so.0 (0xb7daf000)
      libm.so.6 => /lib/tls/libm.so.6 (0xb7d8c000)
      libc.so.6 => /lib/tls/libc.so.6 (0xb7c62000)
      libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb7b91000)
      libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb7b88000)
      libdl.so.2 => /lib/libdl.so.2 (0xb7b84000)
      /lib/ld-linux.so.2 (0xb7feb000)

怀疑ATI 的 libGL.so.1.2 库没加载
删除/usr/X11R6/lib/libGL.so.1，然后重新安装fglrx_6_8_0-8.12.10-1.i386.rpm
然后[code:1]ldconfig[/code:1]
问题解决
[code:1][root@MagicLinux ~]# glxinfo | grep direct 结果如下
direct rendering: Yes[/code:1]
[code:1]
[root@MagicLinux ~]# fglrxinfo  结果如下
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9600 Generic
OpenGL version string: 1.3.5010 (X4.3.0-8.12.10)
[/code:1]

glxgears也到了2000多

问题二.fgl_glxgears无法运行
[code:1]fgl_glxgears[/code:1]
出现
FGLTexMgr: "open of shared memory object failed" (Function not implemented) __FGLTexMgrCreateObject: __FGLTexMgrSHMmalloc failed! fglX11AllocateManagedSurface: __FGLTexMgrCreateObject failed!

解决办法
1.编辑 /etc/fstab 添加一行[code:1]  tmpfs /dev/shm tmpfs defaults 0 0 [/code:1]
2.挂载/dev/shm[code:1] mount /dev/shm [/code:1]
3.确认 /dev/shm是否挂载[code:1] mount | grep "shm"[/code:1]
看结果是否如下
tmpfs on /dev/shm type tmpfs (rw)

问题解决，再[code:1]fgl_glxgears[/code:1]
2900 frames in 5.0 seconds = 580.000 FPS
2908 frames in 5.0 seconds = 581.600 FPS
2845 frames in 5.0 seconds = 569.000 FPS
3549 frames in 5.0 seconds = 709.800 FPS
3547 frames in 5.0 seconds = 709.400 FPS

9.附录
如果遇到问题可以参考如下文档
http://odin.prohosting.com/wedge01/gentoo-radeon-faq.html
也可以把问题发上来大家一起讨论！

ys021662 · 发表于 2005-4-15 22:14:20

我已经将这个将这个做为单独的主题列出来了，请斑竹帮忙删掉原来那几贴吧！谢了！

樱家冢 · 发表于 2005-4-15 22:56:14

不用删，不过我把原来那帖精华撤了。

xx_zz · 发表于 2005-4-16 09:34:07

:-( 谁能解决KDE窗口下调用输入法，窗口无响应的问题么？

lockfan · 发表于 2005-4-16 23:07:30

麻烦楼主看看你上传xorg.conf文件是否正常
我这里说是归档文件损坏
直接贴上来算了.......

ys021662 · 发表于 2005-4-17 00:59:44

我这没有问题啊！你把他重命名为xorg.conf.tar.bz2 呢？

贴一下我的吧！[code:1]
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load       "dbe"    # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection  "extmod"
   Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load       "type1"
Load       "freetype"

# This loads the GLX module
Load       "glx" # libglx.a
Load       "dri" # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds"    "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout"  "de"
# or:
# Option "XkbLayout"  "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout"  "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"

EndSection

# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device"    "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier  "Mouse2"
# Driver    "mouse"
# Option    "Protocol"    "MouseMan"
# Option    "Device"       "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver    "magellan"
# Option    "Device"       "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver    "spaceorb"
# Option    "Device"       "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver    "microtouch"
# Option    "Device"       "/dev/ttyS0"
# Option    "MinX"          "1412"
# Option    "MaxX"          "15184"
# Option    "MinY"          "15372"
# Option    "MaxY"          "1230"
# Option    "ScreenNumber" "0"
# Option    "ReportingMode"  "Scaled"
# Option    "ButtonNumber" "1"
# Option    "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver    "elo2300"
# Option    "Device"       "/dev/ttyS0"
# Option    "MinX"          "231"
# Option    "MaxX"          "3868"
# Option    "MinY"          "3858"
# Option    "MaxY"          "272"
# Option    "ScreenNumber" "0"
# Option    "ReportingMode"  "Scaled"
# Option    "ButtonThreshold" "17"
# Option    "ButtonNumber" "1"
# Option    "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier  "Monitor0"
HorizSync 31.5 - 48.4
VertRefresh 50 - 70
Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier  "Standard VGA"
VendorName  "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver    "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

# BusID    "PCI:0:10:0"

# VideoRam 256

# Clocks    25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
Identifier                         "ATI Graphics Adapter"
Driver                            "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
#Option                            "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel"                "no"
Option "no_dri"                   "no"
# === misc DRI settings ===
Option "mtrr"                      "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup"             "0x00000000"
Option "MonitorLayout"             "AUTO, AUTO"
Option "IgnoreEDID"                "off"
Option "HSync2"                   "unspecified"
Option "VRefresh2"                "unspecified"
Option "ScreenOverlap"             "0"
# === TV-out Management ===
Option "NoTV"                      "yes"
Option "TVStandard"                "NTSC-M"
Option "TVHSizeAdj"                "0"
Option "TVVSizeAdj"                "0"
Option "TVHPosAdj"                "0"
Option "TVVPosAdj"                "0"
Option "TVHStartAdj"             "0"
Option "TVColorAdj"                "0"
Option "GammaCorrectionI"          "0x00000000"
Option "GammaCorrectionII"       "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities"             "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay"             "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#    will be disabled automatically
Option "OpenGLOverlay"             "off"
# === Center Mode (Laptops only) ===
Option "CenterMode"                "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals"       "off"
# === QBS Management ===
Option "Stereo"                   "off"
Option "StereoSyncEnable"          "1"
# === FSAA Management ===
Option "FSAAEnable"                "yes"
Option "FSAAScale"                "6"
Option "FSAADisableGamma"          "no"
Option "FSAACustomizeMSPos"       "no"
Option "FSAAMSPosX0"             "0.000000"
Option "FSAAMSPosY0"             "0.000000"
Option "FSAAMSPosX1"             "0.000000"
Option "FSAAMSPosY1"             "0.000000"
Option "FSAAMSPosX2"             "0.000000"
Option "FSAAMSPosY2"             "0.000000"
Option "FSAAMSPosX3"             "0.000000"
Option "FSAAMSPosY3"             "0.000000"
Option "FSAAMSPosX4"             "0.000000"
Option "FSAAMSPosY4"             "0.000000"
Option "FSAAMSPosX5"             "0.000000"
Option "FSAAMSPosY5"             "0.000000"
# === Misc Options ===
Option "UseFastTLS"                "0"
Option "BlockSignalsOnLock"       "on"
Option "UseInternalAGPGART"       "yes"
Option "ForceGenericCPU"          "no"
Option "AGPMode" "4"
BusID "PCI:1:0:0" # vendor=1002, device=4e50
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier  "Screen0"
Device    "ATI Graphics Adapter"
Monitor    "Monitor0"
DefaultDepth 24
#Option "backingstore"

Subsection "Display"
      Depth    24
      Modes    "1024x768"
      ViewPort 0 0  # initial origin if mode is smaller than desktop
#       Virtual    1280 1024
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

[/code:1]

lockfan · 发表于 2005-4-17 02:19:25

哎........还是不行的说
刚看到这篇帖子真是TMD 众里寻她千百度漠然回首那人却在灯火阑珊处...........塔破铁鞋无觅处
得来全不费功夫.....郁闷了1个月总算要熬出头了.....
然后还是不成功……
正如cjacker大大所说：被系统玩了.....

ys021662 · 发表于 2005-4-17 02:38:20

是什么问题呢？能具体说说吗？

看能不能帮上忙

turingcat · 发表于 2005-4-17 10:05:26

[quote:1f89b872ae="xx_zz"]:-( 谁能解决KDE窗口下调用输入法，窗口无响应的问题么？[/quote]
是不是装了这个驱动之后才这样的?我现在也是了.在konqueror下用不了输入法了.

ys021662 · 发表于 2005-4-17 10:33:04

[quote:0ff761bf8b="turingcat"][quote:0ff761bf8b="xx_zz"]:-( 谁能解决KDE窗口下调用输入法，窗口无响应的问题么？[/quote]
是不是装了这个驱动之后才这样的?我现在也是了.在konqueror下用不了输入法了.[/quote]
应该是装了xorg后才这样的

turingcat · 发表于 2005-4-17 11:10:05

那怎么办呢?

xdot · 发表于 2005-4-17 13:03:09

奇怪，我的输入法好象没什么问题啊

ys021662 · 发表于 2005-4-17 13:18:05

[quote:4906069f92="xdot"]奇怪，我的输入法好象没什么问题啊[/quote]
也是用的fcitx吗？

xx_zz · 发表于 2005-4-17 13:27:34

和fcitx没有关系，不信你换scim看也是一样的。

ys021662 · 发表于 2005-4-17 13:35:30

[quote:f4d3bfd778="xx_zz"]和fcitx没有关系，不信你换scim看也是一样的。[/quote]

这样阿！我以为只是和fcitx冲突呢！

从终端startx进入图形界面又正常，究竟会是什么的问题呢

		自动登录	找回密码
密码			注册

ML 1.2f/2.0 下 ATI 显卡驱动安装详细功略

本帖子中包含更多资源