QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

楼主: KanKer

MagicLinux 2.0 rc1 疑难解答

[复制链接]
发表于 2005-11-4 23:09:59 | 显示全部楼层
-_-我觉得加个/好看点,kde真是一丝不苟啊。呵呵
回复

使用道具 举报

发表于 2005-11-5 09:36:31 | 显示全部楼层
[quote:7322968cd1="april_linux"]前面没描述清楚,是这样的:
在打开文件对话框里选“存储介质”再选文件(MP3)就打不开,而amarok可以打开。[/quote]

存储介质不算本地文件,所以麻烦点到 /mnt/hdax里去吧
回复

使用道具 举报

发表于 2005-11-5 14:35:58 | 显示全部楼层
5Q最近一段时间真是很奇异的说
回复

使用道具 举报

发表于 2005-11-5 18:48:18 | 显示全部楼层
我安装成功后,可是却进不了图形界面,画面就在login那里闪,谁能告诉我该怎么办啊?
我的机子是神舟B740G,I915GM主板,intel GMA900集成显卡....
回复

使用道具 举报

发表于 2005-11-6 00:02:17 | 显示全部楼层
设置了图形界面启动把?按ctrl+alt+backspace切换到console下面登录。
回复

使用道具 举报

发表于 2005-11-6 00:23:27 | 显示全部楼层
有问题啊:
1,ATI RADEON 9700显卡该用哪个驱动程序啊?(要最新的)
2,INTEL 2200BG 无线网卡驱动怎么装啊?
按照网上的指导材料,在FC3可以OK,在ML下就不行啦。具体怎么办啊?
(新手,刚进入LINUX世界,什么都不大懂:(。。。
回复

使用道具 举报

发表于 2005-11-6 08:05:37 | 显示全部楼层
速度够快,我喜欢,这系统真是太好了!!
回复

使用道具 举报

发表于 2005-11-6 14:20:25 | 显示全部楼层
怎么设置啊?我以root登陆后,输入xconfig后中文都变成了乱码,我都换了好几次设置了,输入startx后也进不去,我好想进入图形界面啊!回馈的信息:
_XSERVTransSocketOpenCOTSServer:unable to open socket for inet6
_XSERVTransOpen:transport open failed for inet6/MagicLinux:0
_XSERVTransMakeAllCOTSServerListeners:fail to open listener for inet6

Xwindow System Version 6.8.2
ReleaseDate 9 February 2005
X Protcol Version 11,Revision 0,Release 6.8.2
Build Operating System :Linux 2.6.13.2-for -kankir i686 [ELF]
Cureent Operating System:Linux MagicLinux 2.6.13.4 #1 Tue Nev 1 02:58:19 CST 2005 i686
Build Date :21 September 2005
Build Host:zrd

               before reporting problems ,check http://wiki.x.Org
               to make sure that you have the lastest version.
Module Loader present
Markers--)probed,(**)from config file,(==)default setting,(++)from command line,(!!)notice,(II)informational,(ww)warning,(EE)error,(NI)not imlemented,(??)unknown
(==)Log file :"/var/log/Xorg.0.log",Time:Set Nov 5 20:24:2005
(==)Using config file:"/etc/X11/xorg.conf"
(WW)I810:NO matching Device section for instance (BsuID PCI:0:2:1)found
(EE) No devices detected
Fatel sever error
no screnens found
Please consult the THE  X.org Foundation support
        at http://wiki.x.org
   for help
Please also check the log file at "/var/log/Xorg.0.log"for additional information.
XIO:fatel IO error 104(Connection reset by peer)on X server":0.0" after 0 requests(0 known processed)with 0 events remaining.
回复

使用道具 举报

发表于 2005-11-6 14:23:35 | 显示全部楼层
本人英语又不好,才学linux,怎么办?!
回复

使用道具 举报

 楼主| 发表于 2005-11-6 14:57:05 | 显示全部楼层
是不是 i810 写成 I810 了?
回复

使用道具 举报

发表于 2005-11-6 16:02:02 | 显示全部楼层
是啊。是i810的大写。
回复

使用道具 举报

 楼主| 发表于 2005-11-6 16:39:53 | 显示全部楼层
在 xorg.conf 里 i180 必须是小写才行。
回复

使用道具 举报

发表于 2005-11-6 17:45:30 | 显示全部楼层
在xorg.conf是小的啊,你看,
# File generated by XConfigurator.

# **********************************************************************

Section "Files"
    RgbPath        "/usr/X11R6/lib/X11/rgb"
    FontPath "/usr/share/fonts/ttf/zh_CN/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "unix/:7100"
EndSection

Section "ServerFlags"
    #NoTrapSignals
    #DontZap
    #DontZoom
EndSection

Section "ServerLayout"
     Identifier "XFree86 Configured"
     Screen      0  "Screen0" 0 0
     InputDevice    "Mouse0" "CorePointer"
     InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
      Identifier  "Keyboard0"
      Driver      "keyboard"
      Option      "XkbLayout" "us"
EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"
      Identifier  "Mouse0"
      Driver      "mouse"
    Option      "Protocol"  "PS/2"
    Option      "Device"    "/dev/input/mice"
    Option      "ZAxisMapping" "4 5"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol        "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate        9600
#    SampleRate        150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option      "Emulate3Buttons"
#    Option      "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "LCD Panel 1024x768"
    VendorName  "Unknown"
    ModelName   "Unknown"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5-48.5

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-70

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#        DotClock        45
#        HTimings        1024 1048 1208 1264
#        VTimings        768 776 784 817
#        Flags                "Interlace"
#    EndMode

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384"    20.160 512  528  592  640   384  385  388  404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384"    22     512  528  592  640   384  385  388  404 -HSync -VSync

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400"     31.5   640  672 736   832   400  401  404  445 -HSync +VSync

# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480"     45.8   640  672  768  864   480  488  494  530 -HSync -VSync
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine  "640x480"    31.5   640  656  720  840   480  481  484  500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync

Modeline "640x480"     36     640  696  752  832   480  481  484  509 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline  "800x600"    69.65  800  864  928 1088   600  604  610  640 -HSync -VSync
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline  "800x600"    60.75  800  864  928 1088   600  616  621  657 -HSync -VSync

# 1024x480 for certain Vaios
Modeline "1024x480"   65 1024 1032 1176 1344 480 491 493 525 -HSync -VSync

# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768"   115.5  1024 1056 1248 1440  768  771  781  802 -HSync -VSync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768"   98.9  1024 1056 1216 1408   768 782 788 822 -HSync -VSync

# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885  902 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline  "1152x864"   89.9  1152 1216 1472 1680   864  868  876  892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline  "1152x864"   92    1152 1208 1368 1474   864  865  875  895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864"   110   1152 1240 1324 1552   864  864  876  908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908

# 1280x960 @ 60 HzModeline "1280x960"   108   1280 1376 1488 1800 960 961 964 1000 +HSync +VSync
# 1280x960 @ 85 HzModeline "1280x960"   148.5 1280 1344 1504 1728 960 961 964 1011  +HSync +VSync

# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046 1072 -HSync -VSync
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024"  126.5 1280 1312 1472 1696  1024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync +VSync

# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050"  129   1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050"  151   1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050"  162   1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050"  184   1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync

# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200"  162   1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync +VSync

# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440"  230    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440"  250    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300"     18     400  416  448  512   300  301  302  312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300"     23.890 480  496  576  632   300  301  303  314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300"     25     480  496  576  632   300  301  303  314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300"     29.952 480  504  584  624   300  319  322  333 Doublescan

EndSection


Section "Device"
    Identifier "Linux Frame Buffer"
    Driver "fbdev"
    BoardName "Unknown"
EndSection

Section "Device"
    Identifier  "Intel 915"
    VendorName  "Unknown"
    BoardName   "Unknown"
      Driver    "i810"
    #VideoRam    131072
    Clockchip   "ch8391"
EndSection


Section "Screen"
        Identifier "Screen0"
        Device "Intel 915"
        Monitor "LCD Panel 1024x768"
        DefaultDepth 16
        Subsection "Display"
                Depth 16
                Modes "1024x768"
        EndSubSection
EndSection

Section "DRI"
        Mode 0666
EndSection
回复

使用道具 举报

发表于 2005-11-6 22:18:31 | 显示全部楼层

Re: MagicLinux 2.0 rc1 疑难解答

[quote:675485c49c="KanKer"]1、无法自动挂载 U 盘或移动硬盘
因为我的疏忽,忘记恢复 filesystem 里的 /media 目录。请大家手动建立一个,命令为:
mkdir /media
[/quote]
老大,能说一下 filesystem 在哪里吗?
回复

使用道具 举报

 楼主| 发表于 2005-11-6 22:23:18 | 显示全部楼层
请更新一下这个包:
http://www.magiclinux.org/dev/2.0/cd1/RPMS/filesystem-2.3.5-1mgc.i686.rpm
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-11-25 11:05 , Processed in 0.123244 second(s), 13 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表