安装ATI驱动出现的问题（进来看看，有配置表）

weiken

按照指示安装完后，运行aticonfig --initial,reboot系统，进入不了KDE,
看了一下xorg.conf，发现有多个重复的选项，大家帮我看看应该怎么改动才行。

# Xorg configuration created by system-config-display

Section "ServerLayout"
        Identifier     "single head configuration"
        Screen      0  "aticonfig-Screen[0]" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
        FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath     "/usr/share/fonts/"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
        Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
# Or if you just want both to be control, use:
#        Option        "XkbOptions"        "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "Protocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Unknown monitor"
        HorizSync    31.5 - 37.9
        VertRefresh  50.0 - 70.0
        Option            "dpms"
EndSection

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        Option            "VendorName" "ATI Proprietary Driver"
        Option            "ModelName" "Generic Autodetecting Monitor"
        Option            "DPMS" "true"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "vesa"
        VendorName  "Videocard vendor"
        BoardName   "ATI Technologies Inc RC410 [Radeon Xpress 200M]"
EndSection

Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "fglrx"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "800x600" "640x480"
        EndSubSection
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                                modes      "1024x768"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection
出现两个moniter,device,screen,这之间的关系是怎样的呢，我也做了一些修改能进入KDE，但是分辨路只有800，改不了1024，请大家帮忙研究一下。

lanzinc

screen 调用 moniter 和 device

从xorg.conf看
我没发现有问题。

就是fglrx这个显卡驱动第一次见到

KDE

用这个文件覆盖它试试(请务必将实验结果贴出来)：


# XFree86 4 configuration created by MagicInstaller.

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection


Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is used
# to render fonts.
    RgbPath         "/usr/X11R6/lib/X11/rgb"
    FontPath        "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath        "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath        "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath        "/usr/X11R6/lib/X11/fonts/misc"
    FontPath        "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath        "/usr/X11R6/lib/X11/fonts/cyrillic"
    FontPath        "/usr/X11R6/lib/X11/fonts/TTF"
    FontPath        "/usr/share/fonts/default/Type1"
    FontPath        "/usr/share/fonts/ttf/zh_CN"
EndSection


Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection


Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection


Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection


Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
#HorizSync 31.5 - 37.9
#VertRefresh 50.0 - 70.0
Option "DPMS" "true"
EndSection


Section "Device"
Identifier "Videocard0"
#Driver "vesa"
Driver "fglrx"
VendorName "Videocard vendor"
BoardName "ATI Technologies Inc RC410 [Radeon Xpress 200M]"
EndSection


Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection


Section "DRI"
Group 0
Mode 0666
EndSection

weiken

结果是一样的，出现黑屏，然后就停在那个阶段，查看了很多资料是fglrx这个驱动的问题，找了很多资料解决不了哦

weiken

问题解决了，升级了KDE，然后再安装就ok了，但是用smart升级了kernel2。6。15。6后进入到GRACHIC模式时，在等如界面停住了，hoho，没反应了，有人发生过这样的情况吗？

sunch1

狗屎ati   以后再也不买它的卡了！

jiangtao9999

ati 显卡很好用啊……………
我的 Gentoo + XGL 很爽的……………

guazi111

[quote:2b109fc96e="jiangtao9999"]
ati 显卡很好用啊……………
我的 Gentoo + XGL 很爽的……………[/quote]

看视频屏幕暗……     

jiangtao9999